{"product_id":"binder-kbf-1600-constant-climate-chamber","title":"BINDER KBF 1600 constant climate chamber","description":"\u003carticle\u003e\n\u003cp\u003eBINDER KBF 1600 constant climate chamber\u003c\/p\u003e\n\u003cp\u003eThe BINDER KBF 1600 constant climate chamber is specially designed to ensure constant temperature and humidity conditions for demanding stability tests. The pharmaceutical industry and research facilities in particular benefit from its high reliability, as it fulfils critical ICH requirements and can be used for a wide range of long-term tests. Its precise control technology and energy-saving inverter cooling technology make it both efficient and economical, so that this device has established itself as an extremely powerful and durable solution compared to competing products.\u003c\/p\u003e\n\u003cp\u003ePowerful climate simulation for reliable results\u003c\/p\u003e\n\u003cp\u003eThis climate chamber impresses with its uniform temperature and humidity distribution throughout the entire interior. The tried-and-tested APT.line preheating chamber technology ensures homogeneous air circulation, which is particularly important in pharmaceutical quality assurance. Thanks to the capacitive humidity sensor and the fast-reacting steam humidification system, humidity control is extremely precise. In addition, the modern inverter chiller significantly reduces energy consumption and increases operational reliability.\u003c\/p\u003e\n\u003cp\u003eThe most important technical data at a glance:\n- Temperature range: 0 °C to +70 °C (with humidity: 10...70 °C)\u003cbr\u003e\n- Humidity range: 10...80 % r.H.\u003cbr\u003e\n- High-quality insulation for low energy consumption\u003cbr\u003e\n- Inverter cooling technology with R-600a as climate-neutral refrigerant\u003cbr\u003e\n- Measured values can be read out via internal data logger (USB-Ethernet interfaces)\u003cbr\u003e\n- Robust double swivel castors with brakes for safe transport\u003cbr\u003e\n- Touchscreen controller with real-time programming and ergonomic control panel\u003c\/p\u003e\n\u003cp\u003eThe appliance has a spacious stainless steel interior with a volume of 1610 litres. The integrated door heater and double-walled housing prevent condensation. The high load capacity of up to 100 kg total load and the two standard shelves make handling heavy samples or appliances effortless. In addition to the powerful cooling system, the rapid recovery time after door openings is also an advantage, as the set conditions are restored within a short time.\u003c\/p\u003e\n\u003cp\u003eThe optional light modules are particularly noteworthy. If, for example, ICH photostability tests are required or a plant growth cabinet is needed, the device can be flexibly customised with suitable LED lighting units. This allows the model to cover various research areas without the need to purchase additional specialised units. The intuitive BINDER Multi Management Software APT-COM Basic Edition also makes it easier for users to monitor and document measured values.\u003c\/p\u003e\n\u003ch2\u003eCertifications and standards\u003c\/h2\u003e\n\u003cp\u003eThe construction is designed in accordance with DIN 12880. This standard defines high safety and quality requirements for heating ovens and climate chambers. In addition, the appliance is designed in such a way that essential ICH guidelines regarding temperature and humidity can always be met. This creates the basis for valid data in the development or testing of pharmaceutical products.\u003c\/p\u003e\n\u003cp\u003eApplication examples\u003c\/p\u003e\n\u003cp\u003e- Stability testing in the pharmaceutical industry (e.g. for medicines and active ingredients)\u003cbr\u003e\n- Accelerated shelf life tests in the cosmetics industry (creams, lotions)\u003cbr\u003e\n- Long-term storage of samples in biotechnology\u003cbr\u003e\n- Climate simulations in research projects, for example with plant seeds or bacterial cultures\u003cbr\u003e\n- Material testing in industrial laboratories under constant humidity and temperature conditions\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003ch3\u003eHow can the device be cleaned\u003c\/h3\u003e\n\u003cp\u003e?\u003c\/p\u003e\n\u003cp\u003eThe stainless steel interior allows easy decontamination with suitable cleaning agents. Make sure to switch off and cool down the appliance beforehand to avoid damage.\u003c\/p\u003e\n\u003cp\u003eWhat maintenance intervals are recommended\u003c\/p\u003e\n\u003cp\u003eSeals, sensors and the water supply should be checked at regular intervals. The intervals vary depending on the intensity of use, but can generally be semi-annual or annual.\u003c\/p\u003e\n\u003cp\u003eIs the appliance suitable for continuous operation?\u003c\/p\u003e\n\u003cp\u003eYes. Thanks to the robust compressor technology and precise control, constant continuous operation for long-term tests is unproblematic. The device's self-check supports reliable operation and indicates potential deviations at an early stage.\u003c\/p\u003e\n\u003cp\u003eDoes the model support documentation in accordance with GMP specifications?\u003c\/p\u003e\n\u003cp\u003eThe integrated data recording via USB export and the BINDER Multi Management Software APT-COM Basic Edition offer extensive documentation options. This allows GMP requirements to be met efficiently, provided that the laboratory's own validation processes are observed.\u003c\/p\u003e\n\u003cp\u003eConclusion\u003c\/p\u003e\n\u003cp\u003eThe device fulfils the highest requirements for stability tests and climate simulations by providing temperature and humidity reliably and reproducibly. With its energy-efficient inverter cooling technology, robust design and compliance with standards, this constant climate chamber is a future-proof solution for research and development departments in industry and laboratories. Anyone who requires uninterrupted, precise climate management and at the same time values energy efficiency will find a reliable partner in this design.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Load max.:\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\n51 - 100 kg\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Width outside (incubators,...):\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\n1795 mm\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Width inside (incubators,...):\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\n1521 mm\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Maximum temperature (heat):\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\n+ 70 °C\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Height outside (incubators,...):\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\n1951 mm\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Height inside (incubators,...):\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\n1250 mm\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Interior volume:\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\n1501 - 2000 l\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Maximum power:\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\n1,7 kW\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Suitable for:\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\nPharmaceutical industry\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Cabinet type:\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\nclimate chamberconstant climate chambergrowth chamber\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Safety standard:\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\nDIN 12880\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Depth outside (incubators,...):\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\n1175 mm\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Depth inside (incubators,...):\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\n847 mm\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n                                Lowest temperature (cooling):\n\n                            \u003c\/td\u003e\n\u003ctd\u003e\n0 °C\n                            \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight: \u003c\/td\u003e\n\u003ctd\u003e438,00 Kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct weight: \u003c\/td\u003e\n\u003ctd\u003e438,00 Kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: \u003c\/td\u003e\n\u003ctd\u003e ×  ×  cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003c\/article\u003e","brand":"Binder","offers":[{"title":"Default","offer_id":56397342310777,"sku":"BIND_6112","price":86794300.0,"currency_code":"NGN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6977\/8041\/files\/en-laboratory-incubators-drying-cabinets-binder-kbf-1600-constant-climate-chamber_3a0dcdcb-1855-411c-b5ae-fbaad58504c6.jpg?v=1766527669","url":"https:\/\/www.nassventures-africa.com\/products\/binder-kbf-1600-constant-climate-chamber","provider":"My Store","version":"1.0","type":"link"}