Special Offers

SECA Calibration £29.00

Recommended Medical masks for primary / outpatient / community and social care settings.

Fluid-resistant (Type IIR) surgical mask is Recommended for primary, outpatient, community and social care by setting, NHS and independent sector

Type IIR Fluid Repellent
High bacterial filtration efficiency (BFE) ≥ 98%
Masks sealed in a pack of 50 for hygiene purposes
Latex Free

*Bulk quantities are in stock and available for next day delivery* Free Shipping on All Type IIR Fluid Resistant Masks

Buy 2 for £17.99 each
Buy 4 for £16.99 each
Buy 8 for £16.49 each
Buy 40 for £14.99 each

Fluid Resistant

3 ply face masks with an integrated nose clip. High filtration efficacy acc. to EN 14683:2019, Type II R Fluid Resistant. These masks have different layer materials and thicknesses to correctly reach Type II R Mask (EN14683:2019) certification.

Outer layer: polypropylene non-woven fabric, water-repellent effect layer.
Middle layer: High efficiency blown melt.
Inner layer: polyester soft skin-friendly non-woven fabric

Please be aware, there are many other masks on online market places with zero certification as well as only having 95% high bacterial filtration efficiency (usually sold as dust masks). Most do not carry the IIR for fluid resistance/repellant

Material

Outer layer: PP Non-woven
Middle layer: Melt-blown
Inner layer: PP Non-woven
Earloop: Urethane Elastic Fiber length 18cm ± 1cm
Nose clamp: Iron wire with plastic coasting 10.5cm ± 1cm

Melt Blown Fabric Technology

Our masks feature a once-obscure material called melt-blown fabric. It's an extremely fine mesh of synthetic polymer fibres that forms the critical inner filtration layer of a mask, allowing the wearer to breathe while reducing the inflow of possible infectious particles. There are many non-certified medical masks on other marketplaces that do not have this - they are just three layers of non woven material. Demand for melt-blown fabric is very high.

Recommended Medical masks for primary / outpatient / community and social care settings.

FFP2 face masks with elastic loops and head strap clip.

Recommended Medical PPE for primary / outpatient / community and social care settings.

Box of 50
CE Marked
Wrapped in packs of 5
Certified to EN 149:2001 and A1:2009
PPE EU Notified Body - Ireland CCQS - PDF / Test Certificates Below
Medical Use Certified within the EU
Non-valved
Contoured
Moulded nose bridge
Latex free
Please note we are unable to accept refunds or returns on infection control products such as face masks

Recommended Medical PPE for primary / outpatient / community and social care settings.

Our hand gel is a blend of ethanol, gelling agent and skin conditioner - this means your skin is cared for, while at the same time destroying harmful bacteria. No more cracked hands! Made in the UK (from a Medisave trusted manufacturer), the Zidac Laboratories Hand Sanitizer contains 70% alcohol and comes in a pump dispenser bottle.

70% Alcohol Hand Sanitiser Gel 500ml
Proven To Be Quick and Effective at Killing 99.9% of all Bacteria
No Water Required, No Sticky Residue, Pump dispenser.
Proven to EN1276, Made In England
Complete With Aloe Vera & Moisturiser - Kind to Skin

The Zidac Alcohol Hand Gel is a hand disinfectant that protects to EN1276 against bacteria and viruses. Containing 70% Alcohol, this sanitizer kills 99.9% of all bacteria. No water required and no need to wash your hands after use. The Zidac hand sanitizer contains quality hand-friendly moisturisers and other means of skin protection.

Recommended Medical masks for primary / outpatient / community and social care settings.

Fluid-resistant (Type IIR) surgical mask is Recommended for primary, outpatient, community and social care by setting, NHS and independent sector

Type IIR Fluid Repellent
CE Certified to EN 14683 TYPE IIR
High bacterial filtration efficiency (BFE) ≥ 98%
Masks sealed in a pack of 50 for hygiene purposes

Fluid Resistant

High filtration efficacy acc. to EN 14683, Type II R Fluid Resistant. These masks have different layer materials and thicknesses to correctly reach Type II R Mask (EN14683) certification.

Outer layer: polypropylene non-woven fabric, water-repellent effect layer.
Middle layer: High efficiency blown melt.
Inner layer: polyester soft skin-friendly non-woven fabric

Please be aware, there are many other masks on online market places with zero certification as well as only having 95% high bacterial filtration efficiency (usually sold as dust masks).

Specifications

Size: (17.0 ± 0.5)cm x (9.0 ± 0.5)cm
Filtration Efficiency: EN14683:2019 Annex B >98%
Outer layer: PP Non-woven.
Middle layer: Melt-blown.
Inner layer: PP Non-woven.
Ear loop: Urethane Elastic Fiber.
Nose clamp: Iron wire with plastic coasting.
Please note we are unable to accept refunds or returns on infection control products such as face masks

Melt Blown Fabric Technology

Our masks feature a once-obscure material called melt-blown fabric. It's an extremely fine mesh of synthetic polymer fibres that forms the critical inner filtration layer of a mask, allowing the wearer to breath while reducing the inflow of possible infectious particles. There are many non-certified medical masks on other marketplaces that do not have this - they are just three layers of non woven material. Demand for melt-blown fabric is very high.

Sani-Cloth® Detergent is the multi surface wipe ideal for routine cleaning and damp dusting.

Wipe Dimensions: 300 x 200 mm
Contains 150 wipes
Cleaning wipes
Multi-surface wipes impregnated with a low level detergent suitable for the cleaning of beds, mattresses, chairs, bedside tables, commodes, and most other surface cleaning applications.
Alcohol Free

Sani Cloth Wipes - Universal Disinfectant Wipes x 100

Sani-Cloth® AF Universal is an alcohol-free, Quaternary Ammonium based formulation. Ideal for use cleaning and disinfecting around patients and staff, especially those with respiratory sensitivities. Effective against norovirus and TB.

Sani-Cloth® AF Universal are disposable disinfection wipes for non-invasive medical devices and general surfaces.

Dimensions: 280 x 200 mm
Medical Device Class IIa
Contains 100 wipes

Hygea Hands & Face are maceratable patient care wipes providing optimum skin cleansing, that are kind to the skin, leaving it clean and fresh.

Enhanced infection prevention: each single-use wipe is disposed of after use, helping to reduce the
potential for cross-contamination.
Safe to use: dermatologically tested, latex free, paraben free and alcohol free causing no skin irritation or
sensitisation.
Patient friendly: ready-to-use fragranced wipes promoting independence and dignity.
Kind to the environment: waterless solution with maceratable towel.
Pre-moistened wipes are ready to use
Alcohol Free

Sani-Cloth® Detergent is the multi surface wipe ideal for routine cleaning and damp dusting.

Wipe Dimensions: 240 x 200 mm
Contains 100 wipes
Cleaning wipes
Multi-surface wipes impregnated with a low level detergent suitable for the cleaning of beds, mattresses, chairs, bedside tables, commodes, and most other surface cleaning applications.
Alcohol Free

Sani-Cloth® Detergent is the multi surface wipe ideal for routine cleaning and damp dusting.

Wipe Dimensions: 300 x 175 mm
Contains 60 wipes
Cleaning wipes
Multi-surface wipes impregnated with a low level detergent suitable for the cleaning of beds, mattresses, chairs, bedside tables, commodes, and most other surface cleaning applications.
Alcohol Free

Sani-Cloth Chlor is our sporicidal disinfection wipe, containing detergent to aid cleaning. Ideal for disinfecting high-risk areas endemic with Clostridium difficile spores and norovirus.

Sani-Cloth Chlor are disinfection wipes for non-invasive medical devices and general surfaces.

Wipe Dimensions: 195 x 200 mm
Medical Device Class IIa
Contains 50 wipes

Super Sani-Cloth® is a two in one solution ideal for cleaning and disinfecting in fast-paced environments that require short contact times and broad microorganism efficacy.

Super Sani-Cloth® are compatible with more than 560 non-invasive medical devices and surfaces.

The only wipe in the world providing unrivalled Efficacy, Speed and Compatibility

Wipe Dimensions: 200 x 195 mm
Medical Device Class IIa
Contains 100 wipes
Pre-moistened wipes are ready to use: pre-dosed, premium, low linting disposable cleaning and disinfection wipe, requiring no mixing or measuring, with no smear formulation.

Sani Cloth Wipes - 70% Isopropyl Alcohol Wipes x 200

Sani-Cloth is an ideal disinfectant for use in fast-paced environments that require a short contact time and broad coverage of efficacy against micro organisms.

Sani-Cloth 70 are disposable disinfection wipes for non-invasive medical devices and general surfaces.

Wipe Dimensions: 200 x 200 mm
Medical Device Class IIa
Contains 200 wipes
70% (v/v) Isopropyl alcohol (IPA)

Kill a broad spectrum of harmful microorganisms in seconds.

From the PDI infection conrol disposables range used by healthcare professionals globally, Super Sani-Cloth Plus Wipes feature a medical-grade disinfecting formula intelligently designed to help you maintain excellent hygiene levels.

About Alcohol and Quat Disinfecting Wipes

PDI Super Sani-Cloth Plus Wipes are made with Isopropyl Alcohol B.P 70% v/v, Alkyl Dimethyl benzyl ammonium chloride 0.25%, and Alkyl Dimethyl Ethyl benzyl ammonium chloride 0.25%. This robust formula provides a much broader kill spectrum without slowing down your cleaning process.

Quaternary ammonium offers bactericidal, virucidal (enveloped viruses), and fungicidal effects that work by denaturing cell proteins, compromising cell membranes, and inactivating enzymes to kill cells. However, while Quat is a powerful disinfectant, it is ineffective against non-enveloped viruses and TB and also has a longer contact time (usually around 10 minutes)

Adding alcohol significantly speeds up contact time and enables the killing of TB and non-enveloped viruses like SARS-CoV-1, herpes viruses, HIV, hepatitis B virus, levelling the disinfectant up from a low-level formula to an intermediate one.

Why choose PDI Super Sani-Cloth Plus Wipes?

A bracket is available to help fix the canister to a wall or pole (vertical or horizontal) to help with easy access with cleaning.
The alcohol component significantly speeds up contact time. Wipes are effective at disinfecting in just 50 seconds.
Wipes are disposable to help your workforce maintain high levels of hygiene, discouraging the use of unsanitary cloths.
Wipes are pre-dosed with formula, helping you attain consistent and even coverage when wiping surfaces and objects. Avoid using too much or too little product. Pre-mixed solution means no waiting time for activation.
Wipes are non-linting and do not leave any residue ensuring medical devices are thoroughly cleaned and won’t irritate when used.
Access seams and corners in worktops and clean intricate non-invasive medical devices thanks to the pliable, flexible material each wipe is made with. Wipes hold together throughout use and won’t rip or disintegrate.
The product is made in the UK with the highest quality materials and thoroughly tested to meek British standards, achieving CE certification.
The formula is smear-free, won’t leave residue, and is safe to use on metals without causing corrosion.
The combination of quaternary ammonium and alcohol enables wipes to eradicate mycobacterium, fungi, vegetative forms of bacteria, both enveloped and non-enveloped viruses, and TB.
Store the next wipe easily in the deep, welled tub lid with Snap & Close technology to prevent drying out. The canister is also designed to be slim and easy to grip with one hand.
Tub tops are marked red for quick identification as an alcohol-based disinfectant.

Expiry 5/24

Sani Cloth Wipes - Universal Disinfectant Wipes x 100

Sani-Cloth® AF Universal is an alcohol-free, Quaternary Ammonium based formulation. Ideal for use cleaning and disinfecting around patients and staff, especially those with respiratory sensitivities. Effective against norovirus and TB.

Sani-Cloth® AF Universal are disposable disinfection wipes for non-invasive medical devices and general surfaces.

Dimensions: 280 x 200 mm
Medical Device Class IIa
Contains 100 wipes

Hygea Continence Care washcloths are large, extra soft, premoistened cleansing wipes containing 4% dimethicone to ensure skin is left feeling clean, fresh, and protected.

Barrier Protection: providing a barrier against irritation from body fluids, supporting the regeneration of the skin’s natural barrier function.
Patient friendly: dermatologically tested, lightly fragranced wipes containing no alcohol or lanolin, suitable for use on fragile and sensitive skin.
Improved efficiencies: cleanse, moisturise and protect in one simple step, releasing valuable healthcare worker time
Available with a light, fresh fragrance