Share
Drive DeVilbiss Patient Hose for VacuAide — 1.80 m
The Drive DeVilbiss Patient Hose for VacuAide is a replacement suction hose designed for use with Drive DeVilbiss VacuAide suction units. With a length of 1.80 m, it provides a practical connection between the suction device and compatible suction accessories such as suction catheters or Mini Yankauer suction tips.
The patient hose is compatible with all VacuAide models and is intended for use by one patient only.
Key Features
• Replacement patient hose for Drive DeVilbiss VacuAide suction units
• Compatible with all VacuAide models
• 1.80 m hose length
• Suitable for connection to suction catheters or Mini Yankauer suction tips
• Supports secretion aspiration workflows
• Intended for single-patient use only
• Suitable for hospitals, clinics, care settings and homecare use
• Genuine Drive DeVilbiss product information provided
Product Overview
| Product | Details |
|---|---|
| Product Name | Drive DeVilbiss Patient Hose for VacuAide |
| Brand | Drive DeVilbiss |
| Compatible Device | All Drive DeVilbiss VacuAide models |
| Product Type | Patient suction hose |
| Length | 1.80 m / 180 cm |
| Patient Use | Single-patient use only |
| Product ID | 50-6305D-611001 |
| Item Number | 6305D-611 |
| EAN | 885304003274 |
Compatibility
| Compatible Product | Details |
|---|---|
| VacuAide Suction Units | Compatible with all VacuAide models |
| Suction Catheters | Can be connected where compatible |
| Mini Yankauer Suction Tips | Can be connected where compatible |
| Finger-Tip Control / Finger Valve | Recommended where rapid suction interruption is required |
Use Information
The patient hose connects the VacuAide suction unit to the suction catheter or Mini Yankauer. For better control during suction use, an additional finger-tip control or finger valve is recommended, allowing suction to be interrupted quickly without switching off the device.
| Use Area | Details |
|---|---|
| Secretion Aspiration | Supports suction workflows |
| Patient Connection | Connects to compatible suction accessories |
| Suction Control | Finger-tip control or finger valve can help interrupt suction quickly |
| Hygiene Use | Intended for one patient only |
Important Handling Notes
| Instruction | Details |
|---|---|
| Compatibility | Confirm accessory compatibility before use |
| Patient Use | For single-patient use only |
| Replacement | Replace according to device instructions and hygiene procedures |
| Cleaning / Disposal | Follow local infection-control and waste-management procedures |
| User Manual | Follow the Drive DeVilbiss operating instructions for correct use |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | DeVilbiss Healthcare |
| Address | 100 DeVilbiss Drive, Somerset, PA 15501, USA |
| info@devilbisshealthcare.com | |
| Telephone | +1 800 338 1988 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | DeVilbiss Healthcare GmbH |
| Address | Kamenzer Str. 3, 68309 Mannheim, Germany |
| kontakt@devilbisshc.com | |
| Telephone | +49 621 17898230 |
Suitable For
• Drive DeVilbiss VacuAide suction units
• Suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement hose requirements
Ordering Information
Please confirm compatibility with your VacuAide suction unit and chosen suction accessory before ordering.
Important: This patient hose is intended for use by one patient only. Use, replacement and disposal should follow the device operating instructions and local infection-control procedures.
Shipment
Benefit from reliable delivery options
Every day, we ship our laboratory equipment throughout Nigeria and internationally. We work with trusted and experienced logistics and courier partners to ensure safe and timely delivery. Shipping costs and delivery times depend on the items ordered and the recipient’s location. Alternatively, you may arrange to collect your order in person by appointment. Below is an overview of our shipping options and policies.
Shipping within Nigeria
All goods are insured as standard up to a value of ₦ equivalent of €25,000. Shipping costs are calculated based on the weight, dimensions, value of the shipment, and delivery destination within Nigeria. For detailed shipping information, please contact us directly—we will be happy to assist.
International shipping
For accurate international shipping costs, we require details of the specific product(s) you wish to order.
Please contact us by telephone or email for a tailored quotation.
Freight forwarding, sea or air freight
For large, heavy, or specialized equipment, we provide personalised quotations for road freight, sea freight, or air freight. Taking current logistics conditions into account, we aim to offer the best possible price-to-performance ratio.
Incoterms 2020
All shipments are handled in accordance with Incoterms® 2020 (ICC). Please contact us to confirm and agree on your preferred delivery terms.
Self-collection
If required, you may collect your goods in person by prior appointment. Please note that pricing and availability may vary between Nigeria and other countries.
Standard deliveries
Standard shipments within Nigeria are handled by reputable courier and logistics providers. Upon request, we can also arrange alternative carriers to meet specific delivery requirements.
Insurance
All deliveries are insured up to a maximum value of ₦ equivalent of €25,000. If the value of your goods exceeds this amount, we will contact you to arrange additional insurance coverage.
Delivery time
Delivery times depend on product availability and order volume. High-demand items may be subject to delays beyond our control. If you require urgent delivery, please inform us in advance, and we will do our best to accommodate your request.
Q: Saves time
A: This reason might be the most obvious, but it’s a clear benefit of an FAQ page. Not only does the FAQ page save customers time, but it also saves employees time as well. Having an FAQ page ensures customers don’t have to sit on the phone for hours waiting for simple answers, and employees don’t have to individually answer all questions.
Q: Earns trust
A: Information is available at the click of a button, but as we all know, information is not always true. Because of this, customers are more skeptical than ever before. They hunt for products by sifting through reviews, looking at the product on multiple websites, and doing price checking across the internet.
Q: Provides new insights
A: It’s difficult to get into the head of a shopper. Some buy on impulse, and others buy after thorough research. By tracking the clicks on your FAQ page, you can gather insights about your product or service that you didn’t know before. You can then inform your product team of these insights. From there, the product team can make changes to improve the product or experience.
Q: Drives internal page views
A: If you want your FAQ to be extremely thorough, which it should be, you can link to resources within your FAQ for your customers to find out more information. Whether you link to a blog that goes into more detail or a product page, this content helps the shoppers get the full story before making a purchase.
A: Prevents negative reviews
A: When looking through negative reviews, there’s almost always one thing in common: the problem could’ve been avoided.
Related Products
Medela Battery for Clario Secretion Aspirator
The Medela battery for the Clario secretion aspirator is a replacement lithium-ion battery designed for use with the Medela Clario suction system. It supports portable operation of the aspirator, allowing the device to be used away from mains power when required.
With an operating time of up to 50 minutes at maximum load and a charging time of approximately 5 hours, this battery is suitable for maintaining mobility and flexibility during suction therapy and secretion aspiration workflows.
Key Features
• Replacement battery for Medela Clario secretion aspirator
• Lithium-ion battery type
• Operating time up to 50 minutes at maximum load
• Charging time approximately 5 hours
• Supports portable use of the Clario aspirator
• Suitable for replacement, backup or maintenance requirements
• Genuine Medela product information provided
Product Overview
| Product | Details |
|---|---|
| Product Name | Battery for Clario Secretion Aspirator |
| Brand | Medela |
| Compatible Device | Medela Clario secretion aspirator |
| Battery Type | Li-ion battery |
| Operating Time | Up to 50 minutes at maximum load |
| Charging Time | Approximately 5 hours |
| Product ID | 50-141142040001 |
| Item Number | 14114204 |
| EAN | 859234624130 |
Usage and Safety Information
Before replacing the battery, the Clario aspirator must be switched off and disconnected from the mains power supply.
The battery must be calibrated before first use and again after prolonged storage of more than 2 months. Please refer to the operating instructions for the correct calibration procedure.
Important Handling Notes
| Instruction | Details |
|---|---|
| Before Battery Replacement | Switch off the Clario aspirator |
| Power Disconnection | Disconnect the plug from the power supply before replacing the battery |
| First Use | Battery calibration is required before first deployment |
| After Storage | Recalibrate after storage longer than 2 months |
| Operating Instructions | Follow the Medela Clario operating manual for calibration and replacement guidance |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Why Choose This Battery?
This replacement battery helps keep the Medela Clario secretion aspirator ready for portable use. It is suitable as a replacement for an ageing battery or as a backup battery for facilities that require reliable suction equipment availability.
Suitable For
• Medela Clario secretion aspirators
• Medical suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Equipment maintenance departments
• Replacement and backup battery requirements
Ordering Information
Please confirm compatibility with your specific Medela Clario model before ordering.
Important: Battery operating time may vary depending on device condition, suction load, battery age and usage conditions. Always follow the official Medela operating instructions for charging, calibration, replacement and storage.
Medela Safety Chamber for Clario Secretion Aspirator
The Medela Safety Chamber for the Clario secretion aspirator is a replacement protection chamber designed to help protect the suction device from overflow, secretion ingress and possible internal damage.
The safety chamber acts as a ballast/protection chamber between the collection system and the device. It helps reduce the risk of fluid entering the aspirator if secretion overflow occurs during use.
For hygiene reasons, the safety chamber should be replaced when required, including during patient changeover according to local infection-control procedures and the device operating instructions.
Key Features
• Replacement safety chamber for Medela Clario secretion aspirator
• Helps protect the aspirator from overflowing secretion
• Reduces risk of device damage caused by secretion ingress
• Acts as a ballast/protection chamber
• Suitable for hygiene replacement during patient changeover
• Genuine Medela product information provided
• Suitable for maintenance, replacement and infection-control workflows
Product Overview
| Product | Details |
|---|---|
| Product Name | Safety Chamber for Clario Secretion Aspirator |
| Brand | Medela |
| Compatible Device | Medela Clario secretion aspirator |
| Product Type | Safety chamber / protection chamber |
| Main Use | Helps protect the aspirator from secretion overflow |
| Product ID | 50-141142030001 |
| Item Number | 14114203 |
| EAN | 859234623753 |
Function
| Function | Description |
|---|---|
| Overflow Protection | Helps protect the device from overflowing secretion |
| Device Protection | Helps reduce the risk of internal damage to the aspirator |
| Ballast Chamber | Works as a protective chamber within the suction system |
| Hygiene Replacement | Should be exchanged when required, including patient changeover where applicable |
Usage and Hygiene Information
The safety chamber should be checked and replaced according to the Medela Clario operating instructions and local hygiene protocols.
For hygienic reasons, the safety chamber may need to be exchanged during patient changeover or when contamination is suspected.
Important Handling Notes
| Instruction | Details |
|---|---|
| Patient Changeover | Replace the safety chamber where required for hygiene |
| Contamination Risk | Replace if contamination or overflow is suspected |
| Device Protection | Use the correct safety chamber to help protect the aspirator |
| Operating Instructions | Follow the Medela Clario operating manual for correct replacement guidance |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Why Choose This Safety Chamber?
This replacement safety chamber helps maintain the protection and hygiene of the Medela Clario secretion aspirator. It is suitable for hospitals, clinics, care settings and equipment maintenance teams that require correct replacement parts for safe suction device operation.
Suitable For
• Medela Clario secretion aspirators
• Suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Equipment maintenance departments
• Infection-control replacement requirements
• Patient changeover hygiene procedures
Ordering Information
Please confirm compatibility with your specific Medela Clario model before ordering.
Important: The safety chamber should be replaced according to the device operating instructions, patient-use requirements and local infection-control procedures.
Drive DeVilbiss 220V AC Adapter / Charger for VacuAide 7314
The Drive DeVilbiss 220V AC Adapter / Charger is a replacement mains adapter designed for use with the VacuAide 7314 suction unit. It allows the VacuAide device to be powered or charged from a mains electrical supply when used with the correct compatible power cord.
This listing is for the AC adapter / charger only. It does not include the country-specific mains power cord. A suitable 2-pin flat power cord for connection to the wall socket must be ordered separately where required.
Key Features
• Replacement AC adapter / charger for VacuAide 7314
• Suitable for powering or charging the VacuAide suction unit
• Designed for use with compatible Drive DeVilbiss VacuAide equipment
• Adapter only — country-specific power cord not included
• Requires suitable 2-pin flat power cord for wall socket connection
• Suitable for replacement, maintenance or backup use
• Supports international use when the correct country-specific power cord is used
Product Overview
| Product | Details |
|---|---|
| Product Name | 220V AC Adapter / Charger for VacuAide 7314 |
| Brand | Drive DeVilbiss |
| Compatible Device | VacuAide 7314 suction unit |
| Product Type | AC adapter / charger |
| Product ID | 50-7314P-613001 |
| Item Number | 7314P-613 |
| EAN | 000000000738 |
| Included | AC adapter / charger only |
| Not Included | Country-specific mains power cord |
Important Compatibility Information
| Item | Details |
|---|---|
| Compatible Device | VacuAide 7314 |
| Power Cord Requirement | 2-pin flat power cord required for wall socket connection |
| Country-Specific Plug | Must be selected according to the country of use |
| Voltage Transformer | Not normally required for VacuAide units with automatic 100–240 V AC, 50/60 Hz power adaptation |
| Travel Use | Use the correct compatible power cord for the country of travel |
International Use
A special voltage transformer is not normally required when using compatible VacuAide systems abroad, because VacuAide units are designed with a switchable power supply that automatically adapts to voltages from 100 to 240 V AC at 50 or 60 Hz.
However, the correct country-specific mains power cord must be used for the destination country.
What Is Included?
| Included Item | Details |
|---|---|
| AC Adapter / Charger | Included |
| Country-Specific Power Cord | Not included |
| 2-Pin Flat Power Cord | Must be added separately if required |
Use and Maintenance
This adapter is suitable for replacing a lost, damaged or worn AC adapter / charger for the VacuAide 7314 suction unit. It can also be kept as a spare adapter for equipment maintenance departments, clinics, care settings or facilities that rely on VacuAide suction devices.
Important Handling Notes
| Instruction | Details |
|---|---|
| Before Use | Confirm compatibility with the VacuAide 7314 model |
| Power Cord | Use only a suitable compatible power cord |
| Country Use | Select the correct plug type for the country of operation |
| Inspection | Do not use if the adapter or cable is damaged |
| User Guidance | Follow the VacuAide operating instructions for safe use |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | DeVilbiss Healthcare |
| Address | 100 DeVilbiss Drive, Somerset, PA 15501, USA |
| info@devilbisshealthcare.com | |
| Telephone | +1 800 338 1988 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | DeVilbiss Healthcare GmbH |
| Address | Kamenzer Str. 3, 68309 Mannheim, Germany |
| kontakt@devilbisshc.com | |
| Telephone | +49 621 17898230 |
Suitable For
• Drive DeVilbiss VacuAide 7314 suction units
• Replacement charger requirements
• Backup power adapter requirements
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
Ordering Information
Please confirm compatibility with your specific VacuAide 7314 suction unit before ordering.
Important: This product is supplied as the AC adapter / charger only. The country-specific mains power cord is not included and must be ordered separately where required.
Drive DeVilbiss 1200 ml Autoclavable Secretion Canister Set
The Drive DeVilbiss 1200 ml autoclavable secretion canister set is designed for use with compatible Drive DeVilbiss suction systems. It provides a reusable collection container for secretion aspiration and is suitable for clinical, care and equipment maintenance environments where a replacement or spare secretion canister is required.
The 1200 ml collection canister is autoclavable at 121°C, supporting cleaning and reprocessing according to the user manual and local hygiene procedures.
Key Features
• 1200 ml autoclavable secretion canister set
• Suitable for compatible Drive DeVilbiss suction systems
• Autoclavable at 121°C
• Supplied with bacterial filter
• Supplied with silicone suction hose
• Supplied with angle adapter
• Suitable as a replacement or spare collection container
• Designed for secretion aspiration workflows
• Supports hygienic reprocessing when cleaned according to the user manual
Product Overview
| Product | Details |
|---|---|
| Product Name | Drive DeVilbiss 1200 ml Autoclavable Secretion Canister Set |
| Brand | Drive DeVilbiss |
| Product Type | Secretion canister / collection jar set |
| Capacity | 1200 ml / 1.20 L |
| Autoclavable | Yes |
| Autoclave Temperature | 121°C |
| Product ID | 50-7314D-604001 |
| Item Number | 7314D-603 |
| EAN | 885304000792 |
| Weight | 0.30 kg |
Scope of Delivery
| Included Item | Quantity / Details |
|---|---|
| Autoclavable Secretion Canister | 1200 ml |
| Bacterial Filter | Included |
| Silicone Suction Hose | Included |
| Angle Adapter | Included |
Use and Cleaning Information
The 1200 ml secretion canister is autoclavable at 121°C. Complete cleaning and reprocessing instructions should be followed according to the official user manual.
| Cleaning / Use Note | Details |
|---|---|
| Autoclaving | Canister autoclavable at 121°C |
| Cleaning Instructions | Refer to the user manual |
| Hygiene Use | Clean and reprocess according to local infection-control procedures |
| Replacement Use | Suitable as a replacement or spare canister set |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | DeVilbiss Healthcare |
| Address | 100 DeVilbiss Drive, Somerset, PA 15501, USA |
| info@devilbisshealthcare.com | |
| Telephone | +1 800 338 1988 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | DeVilbiss Healthcare GmbH |
| Address | Kamenzer Str. 3, 68309 Mannheim, Germany |
| kontakt@devilbisshc.com | |
| Telephone | +49 621 17898230 |
Suitable For
• Compatible Drive DeVilbiss suction systems
• Secretion aspiration workflows
• Hospitals
• Clinics
• Care facilities
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement and spare suction canister requirements
Ordering Information
Please confirm compatibility with your specific Drive DeVilbiss suction device before ordering.
Important: The canister must be cleaned, disinfected and autoclaved only according to the official user manual and local infection-control procedures.
Drive DeVilbiss 800 ml Standard Secretion Container for VacuAide 7314
The Drive DeVilbiss 800 ml Standard Secretion Container is designed for use with compatible Drive DeVilbiss VacuAide suction systems. It provides a practical collection container for secretion aspiration and is suitable for patient-use suction workflows in clinical, care and homecare environments.
This 800 ml container is intended for use by one patient and is compatible with the VacuAide 7314, VacuAide 7305 and VacuAide QSU suction units.
The container is supplied with a user-friendly hydrophobic filter system and an integrated connection angle. The filter can be removed or replaced when required, supporting safe and practical suction device maintenance.
Key Features
• 800 ml standard secretion container
• Designed for compatible Drive DeVilbiss VacuAide suction units
• Suitable for VacuAide 7314, VacuAide 7305 and VacuAide QSU
• Intended for single-patient use
• Integrated hydrophobic filter system
• Integrated connection angle
• Filter can be removed or replaced when required
• Suitable as a replacement or spare collection container
• Supports secretion aspiration workflows
• Suitable for clinical, care and homecare use
Product Overview
| Product | Details |
|---|---|
| Product Name | Drive DeVilbiss 800 ml Standard Secretion Container |
| Brand | Drive DeVilbiss |
| Product Type | Secretion container / collection container |
| Capacity | 800 ml |
| Compatible Device | VacuAide 7314, VacuAide 7305 and VacuAide QSU |
| Intended Use | Collection of secretions during suction therapy |
| Patient Use | Intended for use by one patient |
| Filter Type | Hydrophobic filter system |
| Connection | Integrated connection angle |
| Product ID | 50-7305D-633001 |
| Item Number | 7305D-633 |
| EAN | 000000000767 |
Compatibility
| Compatible Suction Unit | Compatibility |
|---|---|
| Drive DeVilbiss VacuAide 7314 | Compatible |
| Drive DeVilbiss VacuAide 7305 | Compatible |
| Drive DeVilbiss VacuAide QSU | Compatible |
Function
| Function | Description |
|---|---|
| Secretion Collection | Collects secretions during suction use |
| Hydrophobic Filtration | Helps protect the suction system from fluid ingress |
| Integrated Connection Angle | Supports simple connection to the suction system |
| Replacement Use | Suitable as a replacement container when required |
| Single-Patient Use | Intended for use by one patient |
Use and Maintenance Information
The 800 ml standard secretion container should be used according to the relevant Drive DeVilbiss operating instructions and local hygiene procedures.
The integrated hydrophobic filter system can be removed or replaced if required. The container should be exchanged according to patient-use requirements, contamination risk and local infection-control guidance.
Important Handling Notes
| Instruction | Details |
|---|---|
| Patient Use | Intended for use by one patient |
| Compatibility | Confirm suitability with the specific VacuAide model before ordering |
| Filter System | Hydrophobic filter can be removed or replaced if necessary |
| Hygiene Procedure | Follow local infection-control procedures |
| User Manual | Follow the Drive DeVilbiss operating instructions for correct use |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | DeVilbiss Healthcare |
| Address | 100 DeVilbiss Drive, Somerset, PA 15501, USA |
| info@devilbisshealthcare.com | |
| Telephone | +1 800 338 1988 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | DeVilbiss Healthcare GmbH |
| Address | Kamenzer Str. 3, 68309 Mannheim, Germany |
| kontakt@devilbisshc.com | |
| Telephone | +49 621 17898230 |
Suitable For
• Drive DeVilbiss VacuAide 7314 suction units
• Drive DeVilbiss VacuAide 7305 suction units
• Drive DeVilbiss VacuAide QSU suction units
• Secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement and spare container requirements
Ordering Information
Please confirm compatibility with your specific Drive DeVilbiss VacuAide suction unit before ordering.
Important: This container is intended for use by one patient. Use, replacement and disposal should follow the device operating instructions and local infection-control procedures.
Medela Container Set with Lid for Clario Secretion Aspirator
The Medela container set with lid is a replacement collection container designed for use with the Medela Clario secretion aspirator. It provides a practical container solution for secretion collection during suction therapy and is suitable for replacement, maintenance or spare-part requirements.
The container can be cleaned in the dishwasher, with boiling water or with disinfectant, according to the user manual and local hygiene procedures. This container is not autoclavable.
Key Features
• Replacement container set for Medela Clario secretion aspirator
• Supplied with lid
• Suitable for secretion collection during suction use
• Can be cleaned in the dishwasher
• Can be cleaned with boiling water
• Can be cleaned with disinfectant
• Not autoclavable
• Suitable for replacement or spare-part use
• Genuine Medela product information provided
Product Overview
| Product | Details |
|---|---|
| Product Name | Container Set with Lid for Clario Secretion Aspirator |
| Brand | Medela |
| Compatible Device | Medela Clario secretion aspirator |
| Product Type | Collection container set |
| Lid Included | Yes |
| Autoclavable | No |
| Product ID | 50-141142020001 |
| Item Number | 14114202 |
| EAN | 07612367009379 |
Cleaning Information
| Cleaning Method | Suitable |
|---|---|
| Dishwasher Cleaning | Yes |
| Boiling Water | Yes |
| Disinfectant | Yes |
| Autoclaving | No |
Use and Hygiene Information
The container should be cleaned according to the Medela Clario operating instructions and local infection-control procedures.
This container is not autoclavable and should not be sterilised in an autoclave. For full cleaning and handling instructions, refer to the official user manual.
Important Handling Notes
| Instruction | Details |
|---|---|
| Compatibility | Confirm suitability with the specific Medela Clario model before ordering |
| Cleaning | Clean using approved methods listed in the user manual |
| Autoclaving | Do not autoclave this container |
| Hygiene Procedure | Follow local infection-control procedures |
| Replacement | Replace when required according to hygiene and device-use requirements |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Suitable For
• Medela Clario secretion aspirators
• Suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement and spare container requirements
Ordering Information
Please confirm compatibility with your specific Medela Clario secretion aspirator before ordering.
Important: This container is not autoclavable. Cleaning and replacement should be carried out according to the Medela Clario user manual and local hygiene procedures.
P.J. Dahlhausen Short Suction Catheter 15 cm — Sterile, Pack of 10
The P.J. Dahlhausen short suction catheter is a sterile, single-use suction catheter designed for secretion aspiration in compatible clinical suction workflows. With a 15 cm length, rounded tip and two lateral eyes, it is suitable for controlled suction use where a short catheter is required.
Each catheter is individually sterile packed, helping support hygiene and safe handling in hospitals, clinics, care facilities and emergency care settings.
This product is supplied in a pack of 10 and is available in two size variants: CH 08 and CH 10.
Key Features
• Short suction catheter
• 15 cm length
• Rounded tip
• Two lateral eyes
• Individually sterile packed
• Single-use product
• Supplied as a pack of 10 pieces
• Available in CH 08 and CH 10 sizes
• Suitable for secretion aspiration workflows
• Manufactured by P.J. Dahlhausen & Co. GmbH
Product Overview
| Product | Details |
|---|---|
| Product Name | P.J. Dahlhausen Short Suction Catheter |
| Product Type | Suction catheter |
| Length | 15 cm |
| Tip Type | Rounded tip |
| Eyes | 2 eyes |
| Sterile | Yes |
| Single Use | Yes |
| Packaging | Individually sterile packed |
| Pack Size | 10 pieces |
| Available Sizes | CH 08 and CH 10 |
| Product ID | absaugkatheter_kurz |
Available Variants
| Variant | Details |
|---|---|
| CH 08 | Select as size variant |
| CH 10 | Select as size variant |
Clinical Use
| Use Area | Description |
|---|---|
| Secretion Aspiration | Supports suction removal of secretions |
| Clinical Suction Workflows | Suitable for compatible suction systems and clinical use |
| Short Catheter Applications | Suitable where a 15 cm catheter length is required |
| Hygiene-Controlled Use | Individually sterile packed for single-use application |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | P.J. Dahlhausen & Co. GmbH |
| Address | Adam-Riese-Str. 4, 50996 Köln, Germany |
| info@dahlhausen.de |
Suitable For
• Hospitals
• Clinics
• Care facilities
• Emergency care settings
• Suction and secretion aspiration workflows
• Replacement stock for clinical suction accessories
Ordering Information
Please select the required size variant before ordering: CH 08 or CH 10.
Important: This product is sterile and intended for single use only. Use and disposal should follow local clinical, infection-control and waste-management procedures.
