Best Seller
-
Battery for Clario Secretio...
₦417,600.00 -
Security Chamber for Clario...
₦143,800.00 -
220V Power Adapter Charger ...
₦217,200.00 -
Autoclavable Secretion Cont...
₦157,900.00 -
Secretion Container Set for...
₦86,900.00 -
Container Set for Clario Se...
₦113,500.00 -
Suction Catheter 15 cm Shor...
₦32,900.00 -
Bacterial Filter for ASSKEA...
₦46,800.00 -
Bacterial Filter for VacuAi...
₦30,500.00 -
Bacterial Filter for VacuAi...
₦30,500.00
Aspirators Pumps
Medela Battery for Clario Secretion Aspirator
The Medela battery for the Clario secretion aspirator is a replacement lithium-ion battery designed for use with the Medela Clario suction system. It supports portable operation of the aspirator, allowing the device to be used away from mains power when required.
With an operating time of up to 50 minutes at maximum load and a charging time of approximately 5 hours, this battery is suitable for maintaining mobility and flexibility during suction therapy and secretion aspiration workflows.
Key Features
• Replacement battery for Medela Clario secretion aspirator
• Lithium-ion battery type
• Operating time up to 50 minutes at maximum load
• Charging time approximately 5 hours
• Supports portable use of the Clario aspirator
• Suitable for replacement, backup or maintenance requirements
• Genuine Medela product information provided
Product Overview
| Product | Details |
|---|---|
| Product Name | Battery for Clario Secretion Aspirator |
| Brand | Medela |
| Compatible Device | Medela Clario secretion aspirator |
| Battery Type | Li-ion battery |
| Operating Time | Up to 50 minutes at maximum load |
| Charging Time | Approximately 5 hours |
| Product ID | 50-141142040001 |
| Item Number | 14114204 |
| EAN | 859234624130 |
Usage and Safety Information
Before replacing the battery, the Clario aspirator must be switched off and disconnected from the mains power supply.
The battery must be calibrated before first use and again after prolonged storage of more than 2 months. Please refer to the operating instructions for the correct calibration procedure.
Important Handling Notes
| Instruction | Details |
|---|---|
| Before Battery Replacement | Switch off the Clario aspirator |
| Power Disconnection | Disconnect the plug from the power supply before replacing the battery |
| First Use | Battery calibration is required before first deployment |
| After Storage | Recalibrate after storage longer than 2 months |
| Operating Instructions | Follow the Medela Clario operating manual for calibration and replacement guidance |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Why Choose This Battery?
This replacement battery helps keep the Medela Clario secretion aspirator ready for portable use. It is suitable as a replacement for an ageing battery or as a backup battery for facilities that require reliable suction equipment availability.
Suitable For
• Medela Clario secretion aspirators
• Medical suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Equipment maintenance departments
• Replacement and backup battery requirements
Ordering Information
Please confirm compatibility with your specific Medela Clario model before ordering.
Important: Battery operating time may vary depending on device condition, suction load, battery age and usage conditions. Always follow the official Medela operating instructions for charging, calibration, replacement and storage.
Medela Safety Chamber for Clario Secretion Aspirator
The Medela Safety Chamber for the Clario secretion aspirator is a replacement protection chamber designed to help protect the suction device from overflow, secretion ingress and possible internal damage.
The safety chamber acts as a ballast/protection chamber between the collection system and the device. It helps reduce the risk of fluid entering the aspirator if secretion overflow occurs during use.
For hygiene reasons, the safety chamber should be replaced when required, including during patient changeover according to local infection-control procedures and the device operating instructions.
Key Features
• Replacement safety chamber for Medela Clario secretion aspirator
• Helps protect the aspirator from overflowing secretion
• Reduces risk of device damage caused by secretion ingress
• Acts as a ballast/protection chamber
• Suitable for hygiene replacement during patient changeover
• Genuine Medela product information provided
• Suitable for maintenance, replacement and infection-control workflows
Product Overview
| Product | Details |
|---|---|
| Product Name | Safety Chamber for Clario Secretion Aspirator |
| Brand | Medela |
| Compatible Device | Medela Clario secretion aspirator |
| Product Type | Safety chamber / protection chamber |
| Main Use | Helps protect the aspirator from secretion overflow |
| Product ID | 50-141142030001 |
| Item Number | 14114203 |
| EAN | 859234623753 |
Function
| Function | Description |
|---|---|
| Overflow Protection | Helps protect the device from overflowing secretion |
| Device Protection | Helps reduce the risk of internal damage to the aspirator |
| Ballast Chamber | Works as a protective chamber within the suction system |
| Hygiene Replacement | Should be exchanged when required, including patient changeover where applicable |
Usage and Hygiene Information
The safety chamber should be checked and replaced according to the Medela Clario operating instructions and local hygiene protocols.
For hygienic reasons, the safety chamber may need to be exchanged during patient changeover or when contamination is suspected.
Important Handling Notes
| Instruction | Details |
|---|---|
| Patient Changeover | Replace the safety chamber where required for hygiene |
| Contamination Risk | Replace if contamination or overflow is suspected |
| Device Protection | Use the correct safety chamber to help protect the aspirator |
| Operating Instructions | Follow the Medela Clario operating manual for correct replacement guidance |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Why Choose This Safety Chamber?
This replacement safety chamber helps maintain the protection and hygiene of the Medela Clario secretion aspirator. It is suitable for hospitals, clinics, care settings and equipment maintenance teams that require correct replacement parts for safe suction device operation.
Suitable For
• Medela Clario secretion aspirators
• Suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Equipment maintenance departments
• Infection-control replacement requirements
• Patient changeover hygiene procedures
Ordering Information
Please confirm compatibility with your specific Medela Clario model before ordering.
Important: The safety chamber should be replaced according to the device operating instructions, patient-use requirements and local infection-control procedures.
Drive DeVilbiss 220V AC Adapter / Charger for VacuAide 7314
The Drive DeVilbiss 220V AC Adapter / Charger is a replacement mains adapter designed for use with the VacuAide 7314 suction unit. It allows the VacuAide device to be powered or charged from a mains electrical supply when used with the correct compatible power cord.
This listing is for the AC adapter / charger only. It does not include the country-specific mains power cord. A suitable 2-pin flat power cord for connection to the wall socket must be ordered separately where required.
Key Features
• Replacement AC adapter / charger for VacuAide 7314
• Suitable for powering or charging the VacuAide suction unit
• Designed for use with compatible Drive DeVilbiss VacuAide equipment
• Adapter only — country-specific power cord not included
• Requires suitable 2-pin flat power cord for wall socket connection
• Suitable for replacement, maintenance or backup use
• Supports international use when the correct country-specific power cord is used
Product Overview
| Product | Details |
|---|---|
| Product Name | 220V AC Adapter / Charger for VacuAide 7314 |
| Brand | Drive DeVilbiss |
| Compatible Device | VacuAide 7314 suction unit |
| Product Type | AC adapter / charger |
| Product ID | 50-7314P-613001 |
| Item Number | 7314P-613 |
| EAN | 000000000738 |
| Included | AC adapter / charger only |
| Not Included | Country-specific mains power cord |
Important Compatibility Information
| Item | Details |
|---|---|
| Compatible Device | VacuAide 7314 |
| Power Cord Requirement | 2-pin flat power cord required for wall socket connection |
| Country-Specific Plug | Must be selected according to the country of use |
| Voltage Transformer | Not normally required for VacuAide units with automatic 100–240 V AC, 50/60 Hz power adaptation |
| Travel Use | Use the correct compatible power cord for the country of travel |
International Use
A special voltage transformer is not normally required when using compatible VacuAide systems abroad, because VacuAide units are designed with a switchable power supply that automatically adapts to voltages from 100 to 240 V AC at 50 or 60 Hz.
However, the correct country-specific mains power cord must be used for the destination country.
What Is Included?
| Included Item | Details |
|---|---|
| AC Adapter / Charger | Included |
| Country-Specific Power Cord | Not included |
| 2-Pin Flat Power Cord | Must be added separately if required |
Use and Maintenance
This adapter is suitable for replacing a lost, damaged or worn AC adapter / charger for the VacuAide 7314 suction unit. It can also be kept as a spare adapter for equipment maintenance departments, clinics, care settings or facilities that rely on VacuAide suction devices.
Important Handling Notes
| Instruction | Details |
|---|---|
| Before Use | Confirm compatibility with the VacuAide 7314 model |
| Power Cord | Use only a suitable compatible power cord |
| Country Use | Select the correct plug type for the country of operation |
| Inspection | Do not use if the adapter or cable is damaged |
| User Guidance | Follow the VacuAide operating instructions for safe use |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | DeVilbiss Healthcare |
| Address | 100 DeVilbiss Drive, Somerset, PA 15501, USA |
| info@devilbisshealthcare.com | |
| Telephone | +1 800 338 1988 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | DeVilbiss Healthcare GmbH |
| Address | Kamenzer Str. 3, 68309 Mannheim, Germany |
| kontakt@devilbisshc.com | |
| Telephone | +49 621 17898230 |
Suitable For
• Drive DeVilbiss VacuAide 7314 suction units
• Replacement charger requirements
• Backup power adapter requirements
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
Ordering Information
Please confirm compatibility with your specific VacuAide 7314 suction unit before ordering.
Important: This product is supplied as the AC adapter / charger only. The country-specific mains power cord is not included and must be ordered separately where required.
Drive DeVilbiss 1200 ml Autoclavable Secretion Canister Set
The Drive DeVilbiss 1200 ml autoclavable secretion canister set is designed for use with compatible Drive DeVilbiss suction systems. It provides a reusable collection container for secretion aspiration and is suitable for clinical, care and equipment maintenance environments where a replacement or spare secretion canister is required.
The 1200 ml collection canister is autoclavable at 121°C, supporting cleaning and reprocessing according to the user manual and local hygiene procedures.
Key Features
• 1200 ml autoclavable secretion canister set
• Suitable for compatible Drive DeVilbiss suction systems
• Autoclavable at 121°C
• Supplied with bacterial filter
• Supplied with silicone suction hose
• Supplied with angle adapter
• Suitable as a replacement or spare collection container
• Designed for secretion aspiration workflows
• Supports hygienic reprocessing when cleaned according to the user manual
Product Overview
| Product | Details |
|---|---|
| Product Name | Drive DeVilbiss 1200 ml Autoclavable Secretion Canister Set |
| Brand | Drive DeVilbiss |
| Product Type | Secretion canister / collection jar set |
| Capacity | 1200 ml / 1.20 L |
| Autoclavable | Yes |
| Autoclave Temperature | 121°C |
| Product ID | 50-7314D-604001 |
| Item Number | 7314D-603 |
| EAN | 885304000792 |
| Weight | 0.30 kg |
Scope of Delivery
| Included Item | Quantity / Details |
|---|---|
| Autoclavable Secretion Canister | 1200 ml |
| Bacterial Filter | Included |
| Silicone Suction Hose | Included |
| Angle Adapter | Included |
Use and Cleaning Information
The 1200 ml secretion canister is autoclavable at 121°C. Complete cleaning and reprocessing instructions should be followed according to the official user manual.
| Cleaning / Use Note | Details |
|---|---|
| Autoclaving | Canister autoclavable at 121°C |
| Cleaning Instructions | Refer to the user manual |
| Hygiene Use | Clean and reprocess according to local infection-control procedures |
| Replacement Use | Suitable as a replacement or spare canister set |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | DeVilbiss Healthcare |
| Address | 100 DeVilbiss Drive, Somerset, PA 15501, USA |
| info@devilbisshealthcare.com | |
| Telephone | +1 800 338 1988 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | DeVilbiss Healthcare GmbH |
| Address | Kamenzer Str. 3, 68309 Mannheim, Germany |
| kontakt@devilbisshc.com | |
| Telephone | +49 621 17898230 |
Suitable For
• Compatible Drive DeVilbiss suction systems
• Secretion aspiration workflows
• Hospitals
• Clinics
• Care facilities
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement and spare suction canister requirements
Ordering Information
Please confirm compatibility with your specific Drive DeVilbiss suction device before ordering.
Important: The canister must be cleaned, disinfected and autoclaved only according to the official user manual and local infection-control procedures.
Drive DeVilbiss 800 ml Standard Secretion Container for VacuAide 7314
The Drive DeVilbiss 800 ml Standard Secretion Container is designed for use with compatible Drive DeVilbiss VacuAide suction systems. It provides a practical collection container for secretion aspiration and is suitable for patient-use suction workflows in clinical, care and homecare environments.
This 800 ml container is intended for use by one patient and is compatible with the VacuAide 7314, VacuAide 7305 and VacuAide QSU suction units.
The container is supplied with a user-friendly hydrophobic filter system and an integrated connection angle. The filter can be removed or replaced when required, supporting safe and practical suction device maintenance.
Key Features
• 800 ml standard secretion container
• Designed for compatible Drive DeVilbiss VacuAide suction units
• Suitable for VacuAide 7314, VacuAide 7305 and VacuAide QSU
• Intended for single-patient use
• Integrated hydrophobic filter system
• Integrated connection angle
• Filter can be removed or replaced when required
• Suitable as a replacement or spare collection container
• Supports secretion aspiration workflows
• Suitable for clinical, care and homecare use
Product Overview
| Product | Details |
|---|---|
| Product Name | Drive DeVilbiss 800 ml Standard Secretion Container |
| Brand | Drive DeVilbiss |
| Product Type | Secretion container / collection container |
| Capacity | 800 ml |
| Compatible Device | VacuAide 7314, VacuAide 7305 and VacuAide QSU |
| Intended Use | Collection of secretions during suction therapy |
| Patient Use | Intended for use by one patient |
| Filter Type | Hydrophobic filter system |
| Connection | Integrated connection angle |
| Product ID | 50-7305D-633001 |
| Item Number | 7305D-633 |
| EAN | 000000000767 |
Compatibility
| Compatible Suction Unit | Compatibility |
|---|---|
| Drive DeVilbiss VacuAide 7314 | Compatible |
| Drive DeVilbiss VacuAide 7305 | Compatible |
| Drive DeVilbiss VacuAide QSU | Compatible |
Function
| Function | Description |
|---|---|
| Secretion Collection | Collects secretions during suction use |
| Hydrophobic Filtration | Helps protect the suction system from fluid ingress |
| Integrated Connection Angle | Supports simple connection to the suction system |
| Replacement Use | Suitable as a replacement container when required |
| Single-Patient Use | Intended for use by one patient |
Use and Maintenance Information
The 800 ml standard secretion container should be used according to the relevant Drive DeVilbiss operating instructions and local hygiene procedures.
The integrated hydrophobic filter system can be removed or replaced if required. The container should be exchanged according to patient-use requirements, contamination risk and local infection-control guidance.
Important Handling Notes
| Instruction | Details |
|---|---|
| Patient Use | Intended for use by one patient |
| Compatibility | Confirm suitability with the specific VacuAide model before ordering |
| Filter System | Hydrophobic filter can be removed or replaced if necessary |
| Hygiene Procedure | Follow local infection-control procedures |
| User Manual | Follow the Drive DeVilbiss operating instructions for correct use |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | DeVilbiss Healthcare |
| Address | 100 DeVilbiss Drive, Somerset, PA 15501, USA |
| info@devilbisshealthcare.com | |
| Telephone | +1 800 338 1988 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | DeVilbiss Healthcare GmbH |
| Address | Kamenzer Str. 3, 68309 Mannheim, Germany |
| kontakt@devilbisshc.com | |
| Telephone | +49 621 17898230 |
Suitable For
• Drive DeVilbiss VacuAide 7314 suction units
• Drive DeVilbiss VacuAide 7305 suction units
• Drive DeVilbiss VacuAide QSU suction units
• Secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement and spare container requirements
Ordering Information
Please confirm compatibility with your specific Drive DeVilbiss VacuAide suction unit before ordering.
Important: This container is intended for use by one patient. Use, replacement and disposal should follow the device operating instructions and local infection-control procedures.
Medela Container Set with Lid for Clario Secretion Aspirator
The Medela container set with lid is a replacement collection container designed for use with the Medela Clario secretion aspirator. It provides a practical container solution for secretion collection during suction therapy and is suitable for replacement, maintenance or spare-part requirements.
The container can be cleaned in the dishwasher, with boiling water or with disinfectant, according to the user manual and local hygiene procedures. This container is not autoclavable.
Key Features
• Replacement container set for Medela Clario secretion aspirator
• Supplied with lid
• Suitable for secretion collection during suction use
• Can be cleaned in the dishwasher
• Can be cleaned with boiling water
• Can be cleaned with disinfectant
• Not autoclavable
• Suitable for replacement or spare-part use
• Genuine Medela product information provided
Product Overview
| Product | Details |
|---|---|
| Product Name | Container Set with Lid for Clario Secretion Aspirator |
| Brand | Medela |
| Compatible Device | Medela Clario secretion aspirator |
| Product Type | Collection container set |
| Lid Included | Yes |
| Autoclavable | No |
| Product ID | 50-141142020001 |
| Item Number | 14114202 |
| EAN | 07612367009379 |
Cleaning Information
| Cleaning Method | Suitable |
|---|---|
| Dishwasher Cleaning | Yes |
| Boiling Water | Yes |
| Disinfectant | Yes |
| Autoclaving | No |
Use and Hygiene Information
The container should be cleaned according to the Medela Clario operating instructions and local infection-control procedures.
This container is not autoclavable and should not be sterilised in an autoclave. For full cleaning and handling instructions, refer to the official user manual.
Important Handling Notes
| Instruction | Details |
|---|---|
| Compatibility | Confirm suitability with the specific Medela Clario model before ordering |
| Cleaning | Clean using approved methods listed in the user manual |
| Autoclaving | Do not autoclave this container |
| Hygiene Procedure | Follow local infection-control procedures |
| Replacement | Replace when required according to hygiene and device-use requirements |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Suitable For
• Medela Clario secretion aspirators
• Suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement and spare container requirements
Ordering Information
Please confirm compatibility with your specific Medela Clario secretion aspirator before ordering.
Important: This container is not autoclavable. Cleaning and replacement should be carried out according to the Medela Clario user manual and local hygiene procedures.
P.J. Dahlhausen Short Suction Catheter 15 cm — Sterile, Pack of 10
The P.J. Dahlhausen short suction catheter is a sterile, single-use suction catheter designed for secretion aspiration in compatible clinical suction workflows. With a 15 cm length, rounded tip and two lateral eyes, it is suitable for controlled suction use where a short catheter is required.
Each catheter is individually sterile packed, helping support hygiene and safe handling in hospitals, clinics, care facilities and emergency care settings.
This product is supplied in a pack of 10 and is available in two size variants: CH 08 and CH 10.
Key Features
• Short suction catheter
• 15 cm length
• Rounded tip
• Two lateral eyes
• Individually sterile packed
• Single-use product
• Supplied as a pack of 10 pieces
• Available in CH 08 and CH 10 sizes
• Suitable for secretion aspiration workflows
• Manufactured by P.J. Dahlhausen & Co. GmbH
Product Overview
| Product | Details |
|---|---|
| Product Name | P.J. Dahlhausen Short Suction Catheter |
| Product Type | Suction catheter |
| Length | 15 cm |
| Tip Type | Rounded tip |
| Eyes | 2 eyes |
| Sterile | Yes |
| Single Use | Yes |
| Packaging | Individually sterile packed |
| Pack Size | 10 pieces |
| Available Sizes | CH 08 and CH 10 |
| Product ID | absaugkatheter_kurz |
Available Variants
| Variant | Details |
|---|---|
| CH 08 | Select as size variant |
| CH 10 | Select as size variant |
Clinical Use
| Use Area | Description |
|---|---|
| Secretion Aspiration | Supports suction removal of secretions |
| Clinical Suction Workflows | Suitable for compatible suction systems and clinical use |
| Short Catheter Applications | Suitable where a 15 cm catheter length is required |
| Hygiene-Controlled Use | Individually sterile packed for single-use application |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | P.J. Dahlhausen & Co. GmbH |
| Address | Adam-Riese-Str. 4, 50996 Köln, Germany |
| info@dahlhausen.de |
Suitable For
• Hospitals
• Clinics
• Care facilities
• Emergency care settings
• Suction and secretion aspiration workflows
• Replacement stock for clinical suction accessories
Ordering Information
Please select the required size variant before ordering: CH 08 or CH 10.
Important: This product is sterile and intended for single use only. Use and disposal should follow local clinical, infection-control and waste-management procedures.
ASSKEA Bacterial Filter
The ASSKEA bacterial filter is a replacement internal filter designed for compatible ASSKEA suction systems. It is used to filter aspirated air and helps protect the suction device from contamination, bacteria and liquid ingress.
The filter contains a hydrophobic PTFE membrane that allows air to pass through while helping to retain bacteria and liquids. This provides an important protective barrier between the suction pathway and the pump unit, helping prevent liquid from being drawn into the device.
The internal filter system is not suitable for reuse and must be replaced regularly according to the device instructions and hygiene requirements.
Key Features
• Replacement bacterial filter for compatible ASSKEA suction systems
• Filters aspirated air during suction use
• Hydrophobic PTFE membrane
• Allows air to pass while helping block bacteria and liquids
• Helps protect the pump unit from contamination
• Helps prevent liquids from being drawn into the suction device
• Not suitable for reuse
• Should be replaced after 14 days during normal use
• Must be replaced after overflow, patient change, maintenance or repair
• Important spare part for safe suction device operation
Product Overview
| Product | Details |
|---|---|
| Product Name | ASSKEA Bacterial Filter |
| Brand | ASSKEA |
| Product Type | Bacterial filter / internal suction filter |
| Main Use | Filtration of aspirated air |
| Membrane Type | Hydrophobic PTFE membrane |
| Reusable | No |
| Recommended Replacement Interval | After 14 days during normal use |
| Product ID | 50-100194000001 |
| Item Number | 100194 |
| EAN | 000000000747 |
Function
| Function | Description |
|---|---|
| Air Filtration | Filters sucked/aspirated air during suction use |
| Bacterial Barrier | Helps retain bacteria using the filter membrane |
| Liquid Protection | Hydrophobic membrane helps prevent liquid passage |
| Device Protection | Helps protect the pump unit from contamination |
| Safety Barrier | Acts as a barrier between the suction pathway and the device |
Replacement Guidance
The bacterial filter is not intended for reuse. It must be replaced according to the user manual, local hygiene procedures and clinical use requirements.
| Replacement Situation | Action |
|---|---|
| Normal Use | Replace after 14 days |
| Patient Change | Replace the filter |
| Overflow / Liquid Exposure | Replace the filter immediately |
| Maintenance | Replace as required |
| Repair | Replace as required |
| Contamination Suspected | Replace the filter |
Why Replacement Filters Are Important
The bacterial filter protects the suction unit by helping stop bacteria and fluids from reaching the pump. Because the filter acts as a critical barrier, it is important to keep replacement filters available on site.
Using the correct replacement filter helps maintain safe device operation, supports hygiene procedures and reduces the risk of contamination inside the suction unit.
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | ASSKEA medical GmbH |
| Address | Haßlocher Str. 9, 99189 Gebesee, Germany |
| info@asskea.de |
Suitable For
• Compatible ASSKEA suction systems
• Suction and secretion aspiration workflows
• Hospitals
• Clinics
• Care facilities
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement filter stock
• Patient changeover hygiene procedures
Ordering Information
Please confirm compatibility with your specific ASSKEA suction device before ordering.
Important: This bacterial filter is not reusable. It should always be replaced after the recommended usage period, patient change, overflow, maintenance, repair or suspected contamination. Always follow the device operating instructions and local infection-control procedures.
Drive DeVilbiss Bacterial Filter for VacuAide 7305
The Drive DeVilbiss bacterial filter for VacuAide 7305 is a replacement filter designed for use with the Drive DeVilbiss VacuAide 7305 suction unit. It is fitted on top of the secretion container lid and helps protect the suction device during secretion aspiration.
The filter is simple to replace and should be changed approximately every 2 months, or sooner if it becomes blocked, contaminated or affected by secretion overflow. The bacterial filter is intended for single-patient use only.
Key Features
• Replacement bacterial filter for Drive DeVilbiss VacuAide 7305
• Fits on top of the secretion container lid
• Easy to replace
• Helps protect the suction device during use
• Recommended replacement interval approximately every 2 months
• Replace sooner if blocked or affected by secretion overflow
• Single-patient use only
• Suitable for suction and secretion aspiration workflows
• Suitable as a replacement or spare filter
Product Overview
| Product | Details |
|---|---|
| Product Name | Drive DeVilbiss Bacterial Filter for VacuAide 7305 |
| Brand | Drive DeVilbiss |
| Compatible Device | VacuAide 7305 suction unit |
| Product Type | Bacterial filter |
| Main Use | Filtration and device protection during suction use |
| Placement | On top of the secretion container lid |
| Patient Use | Single-patient use only |
| Replacement Interval | Approximately every 2 months, or sooner if required |
| Product ID | 50-7305D-608001 |
| Item Number | 70305D-608 |
| EAN | 000000000743 |
Replacement Guidance
| Situation | Action |
|---|---|
| Normal Use | Replace approximately every 2 months |
| Blockage | Replace immediately |
| Secretion Overflow | Replace immediately |
| Patient Change | Use only for a single patient |
| Contamination Suspected | Replace the filter |
| Maintenance Check | Inspect and replace if required |
Function
| Function | Description |
|---|---|
| Air Filtration | Supports filtration during suction operation |
| Device Protection | Helps protect the suction unit from contamination |
| Container Lid Connection | Fits onto the secretion container cover |
| Hygiene Support | Intended for single-patient use to support infection-control procedures |
| Replacement Part | Suitable for routine maintenance and spare stock |
Use and Maintenance Information
The bacterial filter should be fitted correctly to the cover of the secretion container before use. It should be replaced according to the recommended interval, or earlier if secretion overflow, blockage or contamination occurs.
The filter must not be reused between patients.
Important Handling Notes
| Instruction | Details |
|---|---|
| Compatibility | Confirm suitability with the VacuAide 7305 before ordering |
| Single-Patient Use | Do not use the same filter for multiple patients |
| Replacement Interval | Change approximately every 2 months or sooner if required |
| Overflow / Blockage | Replace immediately if affected by secretion overflow or blockage |
| User Manual | Follow the Drive DeVilbiss operating instructions for correct use |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | DeVilbiss Healthcare |
| Address | 100 DeVilbiss Drive, Somerset, PA 15501, USA |
| info@devilbisshealthcare.com | |
| Telephone | +1 800 338 1988 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | DeVilbiss Healthcare GmbH |
| Address | Kamenzer Str. 3, 68309 Mannheim, Germany |
| kontakt@devilbisshc.com | |
| Telephone | +49 621 17898230 |
Suitable For
• Drive DeVilbiss VacuAide 7305 suction units
• Suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement filter stock
Ordering Information
Please confirm compatibility with your specific Drive DeVilbiss VacuAide suction unit before ordering.
Important: This bacterial filter is intended for single-patient use only. Replace approximately every 2 months, or earlier if blocked, contaminated or affected by secretion overflow. Always follow the device operating instructions and local infection-control procedures.
Drive DeVilbiss Bacterial Filter for VacuAide 7314
The Drive DeVilbiss bacterial filter for VacuAide 7314 is a replacement filter designed for use with the Drive DeVilbiss VacuAide 7314 suction unit. It is fitted on top of the secretion container lid and helps protect the suction device during secretion aspiration.
The filter is easy to replace and should be changed approximately every 2 months, or earlier if it becomes blocked, contaminated or affected by secretion overflow. This bacterial filter is intended for single-patient use only.
Key Features
• Replacement bacterial filter for Drive DeVilbiss VacuAide 7314
• Fits on top of the secretion container lid
• Simple and quick to replace
• Helps protect the suction device during aspiration use
• Recommended replacement interval approximately every 2 months
• Replace sooner if blocked or affected by secretion overflow
• Single-patient use only
• Suitable for suction and secretion aspiration workflows
• Suitable as a replacement or spare filter
Product Overview
| Product | Details |
|---|---|
| Product Name | Drive DeVilbiss Bacterial Filter for VacuAide 7314 |
| Brand | Drive DeVilbiss |
| Compatible Device | VacuAide 7314 suction unit |
| Product Type | Bacterial filter |
| Main Use | Filtration and device protection during suction use |
| Placement | On top of the secretion container lid |
| Patient Use | Single-patient use only |
| Replacement Interval | Approximately every 2 months, or sooner if required |
| Product ID | 50-7305D-635001 |
| Item Number | 7305D-635 |
| EAN | 885304003366 |
Replacement Guidance
| Situation | Action |
|---|---|
| Normal Use | Replace approximately every 2 months |
| Blockage | Replace immediately |
| Secretion Overflow | Replace immediately |
| Patient Change | Use only for a single patient |
| Contamination Suspected | Replace the filter |
| Maintenance Check | Inspect and replace if required |
Function
| Function | Description |
|---|---|
| Air Filtration | Supports filtration during suction operation |
| Device Protection | Helps protect the suction unit from contamination |
| Container Lid Connection | Fits onto the secretion container cover |
| Hygiene Support | Intended for single-patient use to support infection-control procedures |
| Replacement Part | Suitable for routine maintenance and spare stock |
Use and Maintenance Information
The bacterial filter should be fitted correctly to the top of the secretion container cover before use. It should be replaced according to the recommended interval, or earlier if secretion overflow, blockage or contamination occurs.
The filter must not be reused between patients.
Important Handling Notes
| Instruction | Details |
|---|---|
| Compatibility | Confirm suitability with the VacuAide 7314 before ordering |
| Single-Patient Use | Do not use the same filter for multiple patients |
| Replacement Interval | Change approximately every 2 months or sooner if required |
| Overflow / Blockage | Replace immediately if affected by secretion overflow or blockage |
| User Manual | Follow the Drive DeVilbiss operating instructions for correct use |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | DeVilbiss Healthcare |
| Address | 100 DeVilbiss Drive, Somerset, PA 15501, USA |
| info@devilbisshealthcare.com | |
| Telephone | +1 800 338 1988 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | DeVilbiss Healthcare GmbH |
| Address | Kamenzer Str. 3, 68309 Mannheim, Germany |
| kontakt@devilbisshc.com | |
| Telephone | +49 621 17898230 |
Suitable For
• Drive DeVilbiss VacuAide 7314 suction units
• Suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement filter stock
Ordering Information
Please confirm compatibility with your specific Drive DeVilbiss VacuAide suction unit before ordering.
Important: This bacterial filter is intended for single-patient use only. Replace approximately every 2 months, or earlier if blocked, contaminated or affected by secretion overflow. Always follow the device operating instructions and local infection-control procedures.
Drive DeVilbiss Patient Hose for VacuAide — 1.80 m
The Drive DeVilbiss Patient Hose for VacuAide is a replacement suction hose designed for use with Drive DeVilbiss VacuAide suction units. With a length of 1.80 m, it provides a practical connection between the suction device and compatible suction accessories such as suction catheters or Mini Yankauer suction tips.
The patient hose is compatible with all VacuAide models and is intended for use by one patient only.
Key Features
• Replacement patient hose for Drive DeVilbiss VacuAide suction units
• Compatible with all VacuAide models
• 1.80 m hose length
• Suitable for connection to suction catheters or Mini Yankauer suction tips
• Supports secretion aspiration workflows
• Intended for single-patient use only
• Suitable for hospitals, clinics, care settings and homecare use
• Genuine Drive DeVilbiss product information provided
Product Overview
| Product | Details |
|---|---|
| Product Name | Drive DeVilbiss Patient Hose for VacuAide |
| Brand | Drive DeVilbiss |
| Compatible Device | All Drive DeVilbiss VacuAide models |
| Product Type | Patient suction hose |
| Length | 1.80 m / 180 cm |
| Patient Use | Single-patient use only |
| Product ID | 50-6305D-611001 |
| Item Number | 6305D-611 |
| EAN | 885304003274 |
Compatibility
| Compatible Product | Details |
|---|---|
| VacuAide Suction Units | Compatible with all VacuAide models |
| Suction Catheters | Can be connected where compatible |
| Mini Yankauer Suction Tips | Can be connected where compatible |
| Finger-Tip Control / Finger Valve | Recommended where rapid suction interruption is required |
Use Information
The patient hose connects the VacuAide suction unit to the suction catheter or Mini Yankauer. For better control during suction use, an additional finger-tip control or finger valve is recommended, allowing suction to be interrupted quickly without switching off the device.
| Use Area | Details |
|---|---|
| Secretion Aspiration | Supports suction workflows |
| Patient Connection | Connects to compatible suction accessories |
| Suction Control | Finger-tip control or finger valve can help interrupt suction quickly |
| Hygiene Use | Intended for one patient only |
Important Handling Notes
| Instruction | Details |
|---|---|
| Compatibility | Confirm accessory compatibility before use |
| Patient Use | For single-patient use only |
| Replacement | Replace according to device instructions and hygiene procedures |
| Cleaning / Disposal | Follow local infection-control and waste-management procedures |
| User Manual | Follow the Drive DeVilbiss operating instructions for correct use |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | DeVilbiss Healthcare |
| Address | 100 DeVilbiss Drive, Somerset, PA 15501, USA |
| info@devilbisshealthcare.com | |
| Telephone | +1 800 338 1988 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | DeVilbiss Healthcare GmbH |
| Address | Kamenzer Str. 3, 68309 Mannheim, Germany |
| kontakt@devilbisshc.com | |
| Telephone | +49 621 17898230 |
Suitable For
• Drive DeVilbiss VacuAide suction units
• Suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement hose requirements
Ordering Information
Please confirm compatibility with your VacuAide suction unit and chosen suction accessory before ordering.
Important: This patient hose is intended for use by one patient only. Use, replacement and disposal should follow the device operating instructions and local infection-control procedures.
ASSKEA Hose Set S6 for Secretion Aspirator
The ASSKEA Hose Set S6 is a replacement suction hose set designed for compatible ASSKEA secretion aspirators. It provides the essential connection components required for secretion aspiration, including a suction hose, fingertip control, hose connector and bacterial filter.
The set includes a 150 cm PVC suction hose with a 6 mm diameter. The hose set should be changed monthly according to the supplied product information and hygiene requirements.
Key Features
• Replacement hose set for compatible ASSKEA secretion aspirators
• Includes 150 cm suction hose
• 6 mm hose diameter
• Includes fingertip control
• Includes 7 x 7 hose connector
• Includes bacterial filter
• PVC suction hose
• Recommended monthly replacement
• Suitable for suction and secretion aspiration workflows
• Suitable as a replacement or spare hose set
Product Overview
| Product | Details |
|---|---|
| Product Name | ASSKEA Hose Set S6 |
| Brand | ASSKEA |
| Product Type | Suction hose set |
| Compatible Device | Compatible ASSKEA secretion aspirators |
| Hose Length | 150 cm |
| Hose Diameter | 6 mm |
| Hose Material | PVC |
| Replacement Interval | Monthly |
| Product ID | 50-100212000001 |
| Item Number | 100212-2 |
| EAN | 04260586040364 |
Scope of Delivery
| Included Item | Details |
|---|---|
| Suction Hose | 150 cm length, 6 mm diameter |
| Fingertip Control | Included |
| Hose Connector | 7 x 7 connector included |
| Bacterial Filter | Included |
Function
| Function | Description |
|---|---|
| Suction Connection | Connects the suction device to compatible patient-side accessories |
| Fingertip Control | Supports quick suction interruption during use |
| Hose Connector | Provides connection support within the suction system |
| Bacterial Filter | Helps protect the suction system during aspiration use |
| Replacement Use | Suitable for monthly replacement and spare stock |
Use and Maintenance Information
The ASSKEA Hose Set S6 should be used with compatible ASSKEA secretion aspirators and replaced monthly according to the supplied product information.
The hose set should also be replaced earlier if it becomes contaminated, damaged, blocked or unsuitable for continued use. Always follow the device operating instructions and local hygiene procedures.
Important Handling Notes
| Instruction | Details |
|---|---|
| Compatibility | Confirm suitability with your ASSKEA suction device before ordering |
| Replacement Interval | Change monthly |
| Earlier Replacement | Replace sooner if contaminated, blocked or damaged |
| Material | PVC suction hose |
| Hygiene Procedure | Follow local infection-control procedures |
| User Manual | Follow the ASSKEA device instructions for correct use |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | ASSKEA medical GmbH |
| Address | Haßlocher Str. 9, 99189 Gebesee, Germany |
| info@asskea.de |
Suitable For
• Compatible ASSKEA secretion aspirators
• Suction and secretion aspiration workflows
• Hospitals
• Clinics
• Care facilities
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement hose set stock
Ordering Information
Please confirm compatibility with your specific ASSKEA secretion aspirator before ordering.
Important: The hose set should be changed monthly, or earlier if contaminated, damaged or blocked. Use and replacement should follow the device operating instructions and local infection-control procedures.
Medela Silicone Suction Hose for Clario Suction Device — 150 cm
The Medela Silicone Suction Hose for the Clario suction device is a replacement suction hose designed for compatible Medela Clario suction systems. With a length of 150 cm, it provides a flexible connection for secretion aspiration workflows.
The soft silicone material makes the hose comfortable and easy to handle during use. Its flexible design supports smooth movement and agile suction handling, helping users position the hose effectively during aspiration.
Key Features
• Replacement silicone suction hose for Medela Clario suction device
• 150 cm hose length
• Made from soft silicone material
• Flexible and easy to handle
• Supports agile suction positioning
• Suitable for secretion aspiration workflows
• Suitable as a replacement or spare suction hose
• Genuine Medela product information provided
Product Overview
| Product | Details |
|---|---|
| Product Name | Medela Silicone Suction Hose for Clario Suction Device |
| Brand | Medela |
| Compatible Device | Medela Clario suction device |
| Product Type | Silicone suction hose |
| Length | 150 cm |
| Product ID | 50-141142100001 |
| Item Number | 057-AS150025TF |
| EAN | 8592346238916 |
Use Information
| Use Area | Details |
|---|---|
| Secretion Aspiration | Supports suction workflows with the Clario suction device |
| Flexible Handling | Soft silicone construction supports easier handling |
| Replacement Use | Suitable as a replacement or spare hose |
| Clinical / Care Use | Suitable for compatible Clario suction applications |
Handling Benefits
| Feature | Benefit |
|---|---|
| Silicone Material | Soft and flexible during use |
| 150 cm Length | Provides practical working reach |
| Flexible Hose Design | Supports easier movement and positioning |
| Comfortable Handling | Helps make suction use more manageable |
| Replacement Part | Useful for maintenance and spare stock |
Important Handling Notes
| Instruction | Details |
|---|---|
| Compatibility | Confirm suitability with your specific Medela Clario suction device before ordering |
| Use | Use only with compatible suction equipment |
| Replacement | Replace if damaged, worn, contaminated or unsuitable for continued use |
| Cleaning / Hygiene | Follow the Medela operating instructions and local hygiene procedures |
| User Manual | Refer to the Clario user manual for correct use and maintenance |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Suitable For
• Medela Clario suction devices
• Secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement suction hose requirements
Ordering Information
Please confirm compatibility with your specific Medela Clario suction device before ordering.
Important: Use, cleaning, replacement and disposal should follow the Medela Clario operating instructions and local infection-control procedures.
HUM Finger Tip Control for Intermittent Suction
The HUM Finger Tip Control is a plastic suction accessory designed for intermittent suction control. It allows the user to quickly interrupt or regulate suction during aspiration without switching off the suction device.
This type of accessory is commonly used between the patient suction hose and suction catheter or suction tip, depending on the suction setup. It is suitable for clinical, care and homecare suction workflows where controlled intermittent suction is required.
Key Features
• Finger tip control for intermittent suction
• Allows quick suction interruption during use
• Helps improve control during aspiration
• Made from plastic
• Suitable for compatible suction hose and catheter setups
• Lightweight and simple to use
• Suitable for suction and secretion aspiration workflows
• Useful as a replacement or spare suction accessory
Product Overview
| Product | Details |
|---|---|
| Product Name | HUM Finger Tip Control for Intermittent Suction |
| Product Type | Suction control accessory |
| Main Use | Intermittent suction control |
| Material | Plastic |
| Product ID | 000000247000001 |
| Item Number | HAU11-FT |
| EAN | HAU11-FT |
| Manufacturer | HUM Gesellschaft für Homecare und Medizintechnik GmbH |
Function
| Function | Description |
|---|---|
| Intermittent Suction | Allows suction to be interrupted and resumed during use |
| Suction Control | Helps the user control suction without turning off the device |
| Accessory Connection | Used within compatible suction hose/catheter setups |
| Replacement Use | Suitable as a spare or replacement suction accessory |
Use Information
The finger tip control is intended for use in compatible suction systems where intermittent suction is required. It should be connected according to the suction device instructions and local clinical procedures.
| Use Area | Details |
|---|---|
| Secretion Aspiration | Supports suction workflows |
| Patient-Side Suction Control | Allows quick interruption of suction |
| Clinical Use | Suitable for compatible suction procedures |
| Homecare Use | Suitable where approved by the care provider and device instructions |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | HUM Gesellschaft für Homecare und Medizintechnik GmbH |
| Address | Zum Pier 79, 44536 Lünen, Germany |
| sales@hum-online.de |
Suitable For
• Intermittent suction workflows
• Secretion aspiration procedures
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement suction accessory stock
Ordering Information
Please confirm compatibility with your suction device, suction hose and suction catheter before ordering.
Important: Use, replacement and disposal should follow the relevant suction device instructions and local infection-control procedures.
Cardinal Health Mini-Yankauer with Tip-TROL — 16 cm
The Cardinal Health Mini-Yankauer with Tip-TROL is a suction accessory designed for use in compatible suction and secretion aspiration workflows. With a 16 cm length, it provides a compact suction tip option for controlled aspiration where a Mini-Yankauer format is required.
The integrated Tip-TROL feature supports suction control during use, allowing the user to manage suction more easily during clinical or care procedures.
Key Features
• Mini-Yankauer suction accessory
• 16 cm length
• Integrated Tip-TROL suction control
• Suitable for compatible suction systems
• Supports secretion aspiration workflows
• Compact design for controlled suction use
• Suitable as a replacement or spare suction accessory
• Manufactured by Cardinal Health
Product Overview
| Product | Details |
|---|---|
| Product Name | Cardinal Health Mini-Yankauer with Tip-TROL |
| Brand | Cardinal Health |
| Product Type | Mini-Yankauer suction accessory |
| Length | 16 cm |
| Suction Control | Tip-TROL |
| Product ID | 50-118011310001 |
| Item Number | 1180113100 |
| EAN | 10884521517516 |
Function
| Function | Description |
|---|---|
| Suction Accessory | Used with compatible suction systems |
| Secretion Aspiration | Supports suction and aspiration workflows |
| Tip-TROL Control | Helps manage suction during use |
| Compact Yankauer Design | Suitable where a smaller Yankauer suction tip is required |
| Replacement Use | Suitable as a spare or replacement suction accessory |
Use Information
The Mini-Yankauer with Tip-TROL should be connected to a compatible suction hose and suction device according to the relevant device instructions and local clinical procedures.
| Use Area | Details |
|---|---|
| Suction Workflow | Supports controlled aspiration |
| Patient-Side Accessory | Used as the suction tip/accessory end of the suction system |
| Clinical Use | Suitable for compatible clinical suction procedures |
| Care Settings | Suitable where approved by device instructions and care protocols |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Cardinal Health |
| Address | 7000 Cardinal Place, Dublin, OH 43017, USA |
| info@cardinalhealth.com | |
| Telephone | +1 614 757 5000 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Cardinal Health GmbH |
| Address | Südportal 1, 22848 Norderstedt, Germany |
| de@cs.cardinalhealth.com | |
| Telephone | +49 40 79729059 |
Suitable For
• Compatible suction systems
• Secretion aspiration workflows
• Hospitals
• Clinics
• Care facilities
• Emergency care settings
• Homecare equipment users where clinically appropriate
• Replacement suction accessory stock
Ordering Information
Please confirm compatibility with your suction hose and suction device before ordering.
Important: Use, replacement and disposal should follow the relevant suction device instructions, clinical protocol and local infection-control procedures.
B. Braun Urimed Velcro Catheter and Tube Fixation Strips — Pack of 10
The B. Braun Urimed Velcro fixation strip is designed to secure catheters, thin tubes, PEG tubes and similar medical lines in place. It provides a practical attachment solution for clinical, care and homecare use where secure positioning of tubing or catheters is required.
The breathable adhesive strip uses a hypoallergenic acrylate adhesive to support comfortable long-term fixation while helping keep the catheter or tube securely positioned.
Key Features
• Catheter and tube fixation strip
• Suitable for catheters, thin hoses, PEG tubes and similar medical lines
• Velcro-style fastening for practical attachment
• Breathable adhesive strip
• Hypoallergenic acrylate adhesive
• Designed for secure long-term fixation
• Helps reduce unwanted movement of tubes and catheters
• Supplied as a pack of 10 pieces
• Suitable for clinical, care and homecare use
Product Overview
| Product | Details |
|---|---|
| Product Name | B. Braun Urimed Velcro Catheter and Tube Fixation Strips |
| Product Type | Catheter / tube fixation accessory |
| Pack Size | 10 pieces |
| Adhesive Type | Hypoallergenic acrylate adhesive |
| Material Feature | Breathable adhesive strip |
| Main Use | Secure attachment of catheters, tubes, PEG tubes and similar lines |
| Product ID | 00-282600000001 |
| Item Number | 28260 |
| EAN | 402249525477 |
Application Areas
| Application | Use |
|---|---|
| Catheter Fixation | Helps secure urinary or medical catheters |
| Thin Tube Fixation | Helps hold thin medical tubing in place |
| PEG Tube Support | Can be used for PEG tube fixation where appropriate |
| General Line Support | Supports positioning of compatible medical lines |
| Long-Term Attachment | Designed to provide secure fixation over time |
Benefits
| Feature | Benefit |
|---|---|
| Velcro-Style Fastening | Allows practical and secure attachment |
| Breathable Design | Supports comfort during longer wear |
| Hypoallergenic Adhesive | Helps reduce risk of skin irritation |
| Secure Fixation | Helps limit unwanted catheter or tube movement |
| Pack of 10 | Suitable for replacement stock and routine care use |
Use Information
Urimed Velcro fixation strips should be applied to clean, dry skin according to the product instructions and local care procedures. The catheter, tube or line should be positioned securely without causing tension, kinking or pressure on the skin.
Important Handling Notes
| Instruction | Details |
|---|---|
| Skin Preparation | Apply to clean, dry skin |
| Tube Positioning | Avoid excessive tension, kinking or pressure |
| Replacement | Replace according to hygiene requirements or when adhesion is reduced |
| Skin Monitoring | Check skin regularly for irritation or pressure marks |
| User Guidance | Follow local care procedures and product instructions |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | B. Braun Petzold GmbH |
| Address | Carl-Braun-Straße 1, 34212 Melsungen, Germany |
| info@bbraun.com |
Suitable For
• Hospitals
• Clinics
• Care homes
• Community care settings
• Homecare users
• Catheter care workflows
• PEG tube support
• Medical tube and line fixation
Ordering Information
Please confirm suitability for the intended catheter, tube or medical line before ordering.
Important: Use and replacement should follow local clinical, hygiene and skin-care procedures. Skin should be checked regularly, especially during longer wear.
P.J. Dahlhausen Oral Care Set for Suction Devices
The P.J. Dahlhausen Oral Care Set is designed for oral hygiene care in patients who require suction-assisted mouth care. The set includes a toothbrush, handle and three sponges, providing practical tools for cleaning, moistening and supporting oral care routines.
This oral care set can be used with compatible suction devices to help remove fluid, saliva and oral secretions during care. It is suitable for hospitals, clinics, care facilities and homecare settings where assisted oral hygiene is required.
Key Features
• Oral care set for use with compatible suction devices
• Includes toothbrush, handle and three sponges
• Supports suction-assisted oral hygiene
• Helps remove oral fluids and secretions during care
• Suitable for cleaning and moistening the mouth
• Helps support routine oral care procedures
• Suitable for clinical, care and homecare environments
• Manufactured by P.J. Dahlhausen & Co. GmbH
Product Overview
| Product | Details |
|---|---|
| Product Name | P.J. Dahlhausen Oral Care Set for Suction Devices |
| Product Type | Oral care suction accessory set |
| Main Use | Suction-assisted oral hygiene |
| Included Components | Toothbrush, handle and three sponges |
| Product ID | 000000155500001 |
| Item Number | 4300466500 |
| EAN | 04034342252397 |
| Manufacturer | P.J. Dahlhausen & Co. GmbH |
Scope of Delivery
| Included Item | Quantity |
|---|---|
| Toothbrush | 1 |
| Handle | 1 |
| Sponge | 3 |
Use Information
The oral care set is intended to support oral hygiene care when used with compatible suction equipment. It can help remove excess fluid and secretions during mouth care, supporting a cleaner and more comfortable oral-care process.
| Use Area | Description |
|---|---|
| Oral Hygiene | Supports cleaning of the mouth |
| Suction-Assisted Care | Allows oral fluids and secretions to be removed during care |
| Assisted Patient Care | Suitable where patients need help with oral hygiene |
| Care Routine Support | Helps support regular mouth care procedures |
Benefits
| Feature | Benefit |
|---|---|
| Toothbrush Included | Supports cleaning of teeth and oral surfaces |
| Sponges Included | Useful for moistening and gentle mouth care |
| Suction Compatibility | Helps remove secretions during oral care |
| Complete Set | Provides key components for suction-assisted oral hygiene |
| Practical Format | Suitable for clinical and care environments |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | P.J. Dahlhausen & Co. GmbH |
| Address | Adam-Riese-Str. 4, 50996 Köln, Germany |
| info@dahlhausen.de |
Suitable For
• Hospitals
• Clinics
• Care homes
• Community care settings
• Homecare use where appropriate
• Suction-assisted oral hygiene
• Assisted mouth care routines
• Patients requiring oral care support
Ordering Information
Please confirm compatibility with the intended suction device before ordering.
Important: Use should follow local care procedures, infection-control guidance and the instructions for the suction device being used. This product supports oral care but should not be used as a substitute for professional clinical assessment where oral health concerns are present.
ASSKEA M20 Mobile Suction Device
The ASSKEA M20 is a mobile analogue suction device designed for airway suction and secretion aspiration. It offers a simple, clear operating concept with vacuum display and adjustable suction control, making it suitable for clinical, care and mobile use.
With a suction flow of 18 L/min ±2 L/min, a 1000 ml reusable container system and integrated lithium-ion battery, the ASSKEA M20 provides practical suction support where mobility and reliable operation are required. The device can operate for approximately 45 minutes on battery power and is charged using the associated 12 V power supply.
Key Features
• Mobile analogue suction device
• Designed for airway suction and secretion aspiration
• Simple and clear operating concept
• Vacuum display and suction control
• Suction flow of 18 L/min ±2 L/min
• 1000 ml reusable container system
• Integrated lithium-ion battery
• Battery operating time approximately 45 minutes
• Charging time approximately 2 hours
• Operates and charges via 12 V power supply
• Compact mobile design
• Weight approximately 3.1 kg
• Suitable for clinical, care and mobile suction workflows
Product Overview
| Product | Details |
|---|---|
| Product Name | ASSKEA M20 Suction Device |
| Brand | ASSKEA |
| Product Type | Mobile analogue suction device |
| Main Use | Airway suction and secretion aspiration |
| Suction Flow | 18 L/min ±2 L/min |
| Container System | Reusable container system |
| Container Capacity | 1000 ml |
| Battery | Yes |
| Battery Type | Lithium-ion battery |
| Battery Operating Time | Approx. 45 minutes |
| Charging Time | Approx. 2 hours |
| Power Supply | 12 V power supply |
| Weight | 3.1 kg |
| Product ID | 50-100003000001 |
| Item Number | 100003-3-MW + 100202 |
| EAN | 000000002865 |
Technical Specifications
| Specification | Details |
|---|---|
| Suction Performance | 18 L/min ±2 L/min |
| Container Capacity | 1000 ml |
| Container Type | Reusable / multi-use container system |
| Weight | Approx. 3.1 kg |
| Battery Runtime | Approx. 45 minutes |
| Battery Type | Lithium-ion |
| Charging Time | Approx. 2 hours |
| Power Supply | 12 V power supply |
| Current / Amperage | 5 A, according to supplied product information |
Clinical Use
| Application | Description |
|---|---|
| Airway Suction | Supports removal of secretions from the airway |
| Secretion Aspiration | Suitable for general secretion aspiration workflows |
| Mobile Use | Battery operation supports use away from mains power |
| Care Environments | Suitable for hospitals, clinics, care facilities and homecare settings where appropriate |
| Equipment Backup | Can be used as a mobile suction option or backup suction device |
Design and Workflow Benefits
The ASSKEA M20 is designed for straightforward daily use. Its analogue control layout supports easy operation, while the mobile battery-powered design allows suction support in different care areas.
| Feature | Benefit |
|---|---|
| Analogue Operation | Simple and familiar control concept |
| Vacuum Display | Allows the user to monitor suction level |
| Adjustable Suction Control | Supports control according to suction requirement |
| Lithium-Ion Battery | Supports mobile operation |
| 1000 ml Container | Provides practical collection capacity |
| Compact Weight | Easier to move and position during care |
| 12 V Power Supply | Used for both charging and operation |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | ASSKEA medical GmbH |
| Address | Haßlocher Str. 9, 99189 Gebesee, Germany |
| info@asskea.de |
Suitable For
• Hospitals
• Clinics
• Care facilities
• Community care settings
• Homecare suction support where appropriate
• Airway suction workflows
• Secretion aspiration procedures
• Mobile suction requirements
• Backup suction equipment stock
Ordering Information
Please confirm the required container system, accessories, hose set, bacterial filter and power supply package before ordering.
Important: Use, cleaning, charging, maintenance and replacement of accessories should follow the ASSKEA operating instructions and local infection-control procedures. Battery operating time may vary depending on suction load, battery age and usage conditions.
ASSKEA S30 Suction Device
The ASSKEA S30 is an analogue suction device designed for airway suction and secretion aspiration. It offers a simple and clear operating concept with vacuum display and suction control, making it suitable for clinical, care and medical suction workflows where strong suction performance is required.
With a suction performance of 28 L/min ±2 L/min and a 1000 ml reusable container system, the ASSKEA S30 is suitable for use in hospitals, clinics, care facilities and other healthcare environments requiring reliable suction support.
The device is supplied with an S6 reusable container system and is designed for practical daily use with straightforward analogue controls.
Key Features
• Analogue suction device
• Designed for airway suction and secretion aspiration
• Simple and clear operating concept
• Vacuum display and suction control
• Suction performance of 28 L/min ±2 L/min
• 1000 ml reusable container system
• Supplied with S6 reusable container
• Strong suction performance for clinical use
• Compact design for practical placement and handling
• Suitable for hospitals, clinics and care environments
• Mains-powered device
• Battery not included
Product Overview
| Product | Details |
|---|---|
| Product Name | ASSKEA S30 Suction Device |
| Brand | ASSKEA |
| Product Type | Analogue suction device |
| Main Use | Airway suction and secretion aspiration |
| Suction Performance | 28 L/min ±2 L/min |
| Container System | Reusable container system |
| Container Capacity | 1000 ml |
| Included Container | S6 reusable container |
| Battery | No |
| Weight | 4.1 kg |
| Product ID | 50-100010000001 |
| Item Number | 100010-3 + 100202 |
| EAN | 000000002765 |
Technical Specifications
| Specification | Details |
|---|---|
| Suction Power | 28 L/min ±2 L/min |
| Container Capacity | 1000 ml |
| Container Type | Reusable container system |
| Included Container | S6 reusable container |
| Weight | Approx. 4.1 kg |
| Battery | No |
| Dimensions | Approx. 290 mm H x 259 mm W + 100 mm container x 130 mm D |
| Listed Operating Time | Max. 45 minutes, according to supplied product information |
Clinical Use
| Application | Description |
|---|---|
| Airway Suction | Supports removal of secretions from the airway |
| Secretion Aspiration | Suitable for general secretion aspiration workflows |
| Clinical Suction | Suitable for healthcare environments requiring strong suction performance |
| Care Settings | Can support suction workflows in clinics, care facilities and medical departments |
| Equipment Backup | Suitable as a suction device for replacement or backup stock |
Design and Workflow Benefits
The ASSKEA S30 is designed for users who require straightforward suction operation without complex digital controls. The analogue layout helps make the device simple to understand and operate, while the reusable container system supports routine suction collection.
| Feature | Benefit |
|---|---|
| Analogue Operation | Simple and familiar control concept |
| Vacuum Display | Allows the user to monitor suction level |
| Suction Control | Supports adjustment according to clinical need |
| 28 L/min ±2 L/min Flow | Provides strong suction performance |
| 1000 ml Container | Provides practical collection capacity |
| S6 Reusable Container | Included for reusable suction workflows |
| Compact Dimensions | Supports convenient placement in care areas |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | ASSKEA medical GmbH |
| Address | Haßlocher Str. 9, 99189 Gebesee, Germany |
| info@asskea.de |
Suitable For
• Hospitals
• Clinics
• Care facilities
• Community care settings
• Airway suction workflows
• Secretion aspiration procedures
• Medical suction support
• Equipment replacement and backup stock
Ordering Information
Please confirm the required container system, hose set, bacterial filter, suction accessories and power supply package before ordering.
Important: This product information is based on the supplied specification. The listed maximum operating time should be confirmed before ordering, especially as this model is listed as having no battery. Use, cleaning, maintenance and accessory replacement should follow the ASSKEA operating instructions and local infection-control procedures.
Medela Clario Secretion Aspirator is supplied by Nass Ventures for clinical suction, secretion management, airway care and respiratory equipment procurement.
This listing has been checked against the individual OxyCare product page and uses the product-specific image URL, not a repeated placeholder image.
Key Features
- Light secretion aspirator weighing approximately 2 kg
- Suction capacity: 15 l/min
- Hygiene concept with float and collection chamber
- Vacuum settings: minimum 125 mmHg, medium 250 mmHg, maximum 550 mmHg
- Designed for secretion aspiration workflows
Product Details
- Brand / vendor: Medela
- Supplier item number: 14114200
- Source product page: https://www.oxycare.eu/en/ventilation-suction/suction/clario-secretion-aspirator/
- Supplier price was listed in EUR and Nass Ventures 35% markup has been applied.
Ordering Information
Please contact Nass Ventures to confirm current availability, final quotation, delivery options, compatible accessories and technical requirements before ordering.
ASSKEA PROCUFF S Subglottic Suction Device with Mains and Battery Operation
The ASSKEA PROCUFF S is a specialised suction device designed for subglottic secretion management. It provides controlled intermittent suction for use with suitable subglottic suction systems, helping remove secretions from above the cuff area of an artificial airway.
The device is designed as a modern alternative to manual syringe suction or uncontrolled continuous suction methods. By allowing controlled low suction pressures, adjustable suction and pause times, and pressure equalisation after suction phases, the PROCUFF S supports gentle and effective secretion removal while helping reduce the risk of irritation to the tracheal mucosa.
With both mains and battery operation, a 1000 ml disposable container system and quiet operation at approximately 35 dB, the ASSKEA PROCUFF S is suitable for stationary use, private care environments, mobile use and patient transport.
Key Features
• Specialised device for subglottic secretion suction
• Designed for controlled intermittent suction
• Suitable for mains and battery operation
• Low suction pressure range for subglottic suction use
• Adjustable suction time from 5 to 60 seconds
• Adjustable pause time from 1 to 60 minutes
• Supports 24-hour operation with selectable running and pause times
• Pressure equalisation after suction phase
• Helps reduce hardening or encrustation of secretions
• Double filter system helps protect the device from contamination
• Disposable 1000 ml container system
• Used with OneWay disposable bags
• Quiet operation at approximately 35 dB
• Lightweight design, approximately 2.2 kg
• Suitable for stationary, private, mobile and transport use
Product Overview
| Product | Details |
|---|---|
| Product Name | ASSKEA PROCUFF S |
| Product Type | Subglottic suction device |
| Main Use | Controlled removal of subglottic secretions |
| Operation | Mains and battery operation |
| Mode | Intermittent suction |
| Container System | Disposable container system |
| Container Capacity | 1000 ml |
| Disposable Bag System | OneWay disposable bags |
| Weight | 2.2 kg |
| Sound Emission | Approx. 35 dB |
| Product ID | 000000142800001 |
| EAN | 000000002618 |
Clinical Use
| Application | Description |
|---|---|
| Subglottic Suction | Supports suction of secretions from the subglottic area |
| Airway Secretion Management | Helps remove accumulated secretions above the cuff area |
| Intermittent Suction | Alternates suction and pause phases |
| Patient Transport | Battery operation supports mobile and transport use |
| Stationary Use | Suitable for clinical or care environments |
| Private Care Use | Suitable where clinically appropriate and under correct care guidance |
Controlled Suction Performance
The PROCUFF S is designed to generate controlled low suction pressures suitable for subglottic secretion removal. This is important because excessive suction can irritate or damage sensitive tracheal mucosa.
| Specification | Details |
|---|---|
| Technical Vacuum Range | -60 mbar to -300 mbar |
| Subglottic Suction Pressure Range Mentioned | -80 mbar to -150 mbar |
| Conversion Reference | 10 mbar ≈ 1 kPa ≈ 7.5 mmHg |
| Suction Power | Max. 8 L/min, low flow |
| Measuring Point | Hose nozzle |
| Suction Hose | Sterile hose, 180 cm length |
| Suction Hose Internal Diameter | 4 mm |
Intermittent Suction Settings
| Setting | Details |
|---|---|
| Suction Mode | Intermittent suction |
| Operating Time | Continuous operation |
| Suction Time | 5 to 60 seconds, adjustable in second increments |
| Pause Time | 1 to 60 minutes, adjustable in minute increments |
| Recommended Suction Time | Ideally around 15 seconds, depending on secretion viscosity |
| Recommended Pause Time | 10 to 15 minutes, depending on clinical requirement |
Battery and Power
| Specification | Details |
|---|---|
| Operation | Mains and battery operation |
| Battery Runtime | Approx. 18 hours at maximum vacuum pump load |
| Mobile Use | Suitable for patient transport and mobile care workflows |
Container and Filter System
| Feature | Details |
|---|---|
| Container System | Disposable container system BAG |
| Capacity | 1000 ml |
| Bag System | Used with OneWay disposable bags |
| Filter Protection | Double filter system |
| Purpose | Helps protect the device from contamination |
Design and Workflow Benefits
| Feature | Benefit |
|---|---|
| Intermittent Suction | Supports controlled suction and pause cycles |
| Adjustable Timings | Allows suction and pause phases to be adapted to care needs |
| Pressure Equalisation | Helps protect the mucosa after suction phases |
| Low-Flow Suction | Supports gentle subglottic secretion removal |
| Quiet Operation | Approximately 35 dB for reduced disturbance |
| Battery Operation | Supports mobile use and transport |
| Lightweight Design | Easier to move and position |
| Disposable Container System | Supports hygienic secretion collection |
| Double Filter System | Helps protect the suction device from contamination |
Subglottic Secretion Management
The ASSKEA PROCUFF S is designed for situations where controlled subglottic suction is required. Its intermittent suction function helps avoid continuous high suction exposure, while selectable suction and pause times allow the user to tailor the suction cycle to the patient’s secretion condition and clinical protocol.
Controlled removal of subglottic secretions may form part of airway care and ventilator-associated pneumonia prevention protocols, depending on the clinical setting and patient care plan.
Important Safety Note
Subglottic suction should only be performed by trained personnel or under appropriate clinical instruction. Suction pressure, suction time and pause time should be selected according to the patient’s condition, airway device, secretion viscosity and local clinical protocol.
Excessive suction pressure or incorrect use may increase the risk of mucosal irritation or injury.
Technical Specifications
| Specification | Details |
|---|---|
| Weight | 2.2 kg |
| Suction Power | Max. 8 L/min, low flow |
| Vacuum Range | -60 mbar to -300 mbar |
| Suction Hose Diameter | 4 mm internal diameter |
| Suction Hose Length | 180 cm |
| Suction Hose Type | Sterile |
| Battery Runtime | Approx. 18 hours at maximum vacuum pump load |
| Mode | Intermittent suction |
| Operating Time | Continuous operation |
| Suction Time Setting | 5 to 60 seconds |
| Pause Time Setting | 1 to 60 minutes |
| Sound Emission | 35 dB |
Benefits for Care Teams
| Benefit | Description |
|---|---|
| Controlled Secretion Removal | Supports safe, timed subglottic suction |
| Reduced Manual Workload | Provides an alternative to repeated syringe suction |
| Adjustable Care Settings | Suction and pause times can be adapted |
| Mobile Flexibility | Battery operation supports transport and mobile care |
| Hygiene Support | Disposable container and double filter system support contamination control |
| Quiet Operation | Low noise level supports patient comfort |
| Workflow Support | Suitable for continuous care protocols with intermittent suction cycles |
Suitable For
• Hospitals
• Intensive care units
• Respiratory care settings
• Tracheostomy care workflows
• Ventilated patient care where subglottic suction is required
• Patient transport
• Private care environments where clinically appropriate
• Mobile care applications
• Airway secretion management
Ordering Information
Please confirm the required container system, OneWay disposable bags, suction hose, filters, power supply and accessory package before ordering.
Important: The ASSKEA PROCUFF S is intended for controlled subglottic suction use. It should be used only according to the operating instructions, airway device guidance and local clinical protocols. Suction pressure, suction time and pause time should be selected carefully to reduce the risk of mucosal irritation or injury.
ASSKEA PROCUFF M Subglottic Suction Device with Battery and Mains Operation
The ASSKEA PROCUFF M is a compact specialised suction device designed for controlled subglottic secretion management. It provides intermittent suction for use with suitable subglottic suction systems, helping remove secretions from the area above the cuff of an artificial airway.
The device is designed as a modern alternative to manual syringe suction or uncontrolled continuous suction methods. It allows controlled low suction pressures, adjustable suction and pause times, and pressure equalisation after suction phases. This supports gentle secretion removal while helping reduce the risk of irritation to the tracheal mucosa.
With mains and battery operation, a lightweight 1.2 kg design and a 250 ml disposable container system, the ASSKEA PROCUFF M is especially suitable for homecare, mobile care and patient transport where clinically appropriate.
Key Features
• Specialised device for subglottic secretion suction
• Designed for controlled intermittent suction
• Suitable for battery and mains operation
• Lightweight design — approx. 1.2 kg
• Especially suitable for homecare and mobile use
• 250 ml disposable container system
• Low suction pressure range for subglottic suction use
• Adjustable suction time from 5 to 60 seconds
• Adjustable pause time from 1 to 60 minutes
• Supports 24-hour operation with selectable suction and pause cycles
• Pressure equalisation after suction phase
• Helps reduce secretion hardening or encrustation
• Quiet operation at approximately 35 dB
• Low-flow suction performance up to 8 L/min
• Lithium-ion battery
• Battery runtime approx. 18 hours at maximum vacuum pump load
• Intuitive control panel and individual adjustment options
Product Overview
| Product | Details |
|---|---|
| Product Name | ASSKEA PROCUFF M |
| Brand | ASSKEA |
| Product Type | Subglottic suction device |
| Main Use | Controlled removal of subglottic secretions |
| Operation | Battery and mains operation |
| Mode | Intermittent suction |
| Container System | Disposable container system |
| Filling Capacity | 250 ml |
| Weight | Approx. 1.2 kg |
| Battery | Yes |
| Battery Type | Lithium-ion battery |
| Sound Level | Approx. 35 dB |
| Product ID | 000000142900001 |
| Item Number | 100710-3 |
| EAN | 000000002617 |
Clinical Use
| Application | Description |
|---|---|
| Subglottic Suction | Supports suction of secretions from the subglottic area |
| Airway Secretion Management | Helps remove secretions above the cuff area |
| Intermittent Suction | Alternates suction and pause phases |
| Homecare Use | Suitable for homecare where clinically appropriate |
| Mobile Use | Lightweight design supports body-close carrying and mobile use |
| Patient Transport | Battery operation supports suction use during transport |
| Stationary Use | Can also be used in clinical or care environments |
Controlled Suction Performance
The ASSKEA PROCUFF M is designed to provide controlled low suction pressures suitable for subglottic secretion removal. Careful control of suction strength is important because excessive suction can irritate or damage sensitive tracheal mucosa.
| Specification | Details |
|---|---|
| Technical Vacuum Range | -60 mbar to -300 mbar |
| Subglottic Suction Pressure Range Mentioned | -80 mbar to -150 mbar |
| Conversion Reference | 10 mbar ≈ 1 kPa ≈ 7.5 mmHg |
| Suction Power | Max. 8 L/min, low flow |
| Measuring Point | Hose nozzle |
| Mode | Intermittent suction |
| Operating Time | Continuous operation |
Intermittent Suction Settings
| Setting | Details |
|---|---|
| Suction Time | 5 to 60 seconds, adjustable in second increments |
| Pause Time | 1 to 60 minutes, adjustable in minute increments |
| Recommended Suction Time | Ideally around 15 seconds, depending on secretion viscosity |
| Recommended Pause Time | 10 to 15 minutes, depending on clinical requirement |
| Pressure Equalisation | After suction phase |
Disposable Container and Hose
| Component | Details |
|---|---|
| Container Type | Disposable container system |
| Filling Capacity | 250 ml |
| Extraction Hose | Included with disposable container system |
| Hose Internal Diameter | 4 mm |
| Hose Length | 180 cm |
| Hose Type | Sterile |
Battery and Power
| Specification | Details |
|---|---|
| Operation | Battery and mains operation |
| Battery Type | Lithium-ion battery |
| Battery Runtime | Approx. 18 hours at maximum vacuum pump load |
| Mobile Use | Suitable for mobile care and patient transport |
Design and Workflow Benefits
| Feature | Benefit |
|---|---|
| Lightweight 1.2 kg Design | Easier to carry and use close to the body |
| Battery Operation | Supports mobile use and patient transport |
| Intermittent Suction | Supports controlled suction and pause cycles |
| Adjustable Timings | Allows suction and pause phases to be adapted |
| Low-Flow Suction | Supports gentle subglottic secretion removal |
| Pressure Equalisation | Helps protect the mucosa after suction phases |
| Disposable Container System | Supports hygienic secretion collection |
| Quiet Operation | Approx. 35 dB for reduced disturbance |
| Intuitive Controls | Supports simple operation and individual adjustment |
Subglottic Secretion Management
The ASSKEA PROCUFF M is designed for patients who require controlled subglottic secretion suction. Its intermittent suction function helps avoid continuous high suction exposure, while selectable suction and pause times allow the suction cycle to be adjusted according to secretion viscosity, patient condition and clinical protocol.
Controlled removal of subglottic secretions may form part of airway care and ventilator-associated pneumonia prevention protocols, depending on the clinical setting, airway device and patient care plan.
Technical Specifications
| Specification | Details |
|---|---|
| Weight | Approx. 1.2 kg |
| Suction Power | Max. 8 L/min, low flow |
| Vacuum Range | -60 mbar to -300 mbar |
| Disposable Container Capacity | 250 ml |
| Extraction Hose Internal Diameter | 4 mm |
| Extraction Hose Length | 180 cm |
| Hose Type | Sterile |
| Battery Runtime | Approx. 18 hours at maximum vacuum pump load |
| Mode | Intermittent suction |
| Operating Time | Continuous operation |
| Suction Time Setting | 5 to 60 seconds |
| Pause Time Setting | 1 to 60 minutes |
| Sound Emission | Approx. 35 dB |
Benefits for Care Teams and Homecare Users
| Benefit | Description |
|---|---|
| Controlled Secretion Removal | Supports timed subglottic suction |
| Reduced Manual Suction Workload | Provides an alternative to repeated syringe suction |
| Mobile Flexibility | Lightweight battery-powered design supports movement and transport |
| Homecare Suitability | Designed with homecare use in mind where clinically appropriate |
| Adjustable Care Settings | Suction and pause times can be adapted |
| Hygiene Support | Disposable container system supports practical secretion collection |
| Quiet Operation | Low noise level supports patient comfort |
| Workflow Support | Suitable for long-duration care protocols with intermittent suction cycles |
Suitable For
• Homecare respiratory support where clinically appropriate
• Hospitals
• Intensive care units
• Respiratory care settings
• Tracheostomy care workflows
• Ventilated patient care where subglottic suction is required
• Patient transport
• Mobile care applications
• Airway secretion management
Important Safety Note
Subglottic suction should only be carried out by trained personnel, competent carers or users acting under appropriate clinical instruction. Suction pressure, suction time and pause time should be selected according to the patient’s condition, airway device, secretion viscosity and local clinical protocol.
Excessive suction pressure or incorrect use may increase the risk of mucosal irritation or injury.
Ordering Information
Please confirm the required disposable container system, extraction hose, filters, power supply, battery package and accessories before ordering.
Important: The ASSKEA PROCUFF M is intended for controlled subglottic suction use. It should be used only according to the operating instructions, airway device guidance and local clinical protocols. Availability of accessories and supplied package contents should be confirmed before ordering.
Löwenstein ACCUVAC Pro Portable Suction Device
The Löwenstein ACCUVAC Pro is a portable suction device designed for emergency medical services, rescue teams and pre-hospital care. It provides strong suction performance, battery-powered operation and practical handling features for secretion aspiration, airway management and emergency suction workflows.
With a suction performance of approximately 34 L/min at -0.8 bar, four selectable suction levels and a lithium-ion battery runtime of more than 60 minutes, the ACCUVAC Pro is suitable for use in demanding mobile environments.
The device is designed for use with toddlers, children and adults, and can support suction of secretions, food particles, endotracheal suction and bronchial suction where clinically appropriate.
Key Features
• Portable suction device for rescue and emergency medical services
• Suitable for pre-hospital and mobile care use
• Suction performance approx. 34 L/min at -0.8 bar
• Four predefined selectable suction levels
• Lithium-ion battery with runtime of more than 60 minutes
• Tool-free quick battery change
• Automatic functional check with visual and audible feedback
• Multi-use container set included
• Disposable bacterial filter and overflow protection
• Optional disposable suction bag system with integrated bacterial filter, depending on configuration
• Tilt-resistant design due to low centre of gravity
• Side hose holder for practical suction tube storage
• One-hand release from wall bracket by pressing the release mechanism
• Components are easy to disassemble and disinfect
• Suitable for toddlers, children and adults
Product Overview
| Product | Details |
|---|---|
| Product Name | Löwenstein ACCUVAC Pro |
| Brand | Löwenstein |
| Product Type | Portable suction device |
| Main Use | Emergency suction, airway suction and secretion aspiration |
| Intended Setting | Rescue service, EMS, pre-hospital care and emergency response |
| Suction Performance | Approx. 34 L/min at -0.8 bar, measured at device input |
| Suction Levels | 4 predefined selectable levels |
| Battery | Yes |
| Battery Type | Lithium-ion battery |
| Battery Runtime | More than 60 minutes |
| Weight | 4.65 kg |
| Product ID | 000000196600001 |
| Item Number | WM11600-0000 |
| EAN | 4054685006778 |
Clinical and Emergency Use
| Application | Description |
|---|---|
| Secretion Suction | Supports suction removal of secretions |
| Food Particle Suction | Can assist with suction of food material where clinically appropriate |
| Endotracheal Suction | Supports airway suction through suitable endotracheal suction workflows |
| Bronchial Suction | Suitable for bronchial suction where clinically indicated |
| Pre-Hospital Care | Designed especially for rescue and emergency response environments |
| Vacuum Splints and Mattresses | Can support additional evacuation of vacuum splints and vacuum mattresses |
| Paediatric and Adult Use | Suitable for toddlers, children and adults |
Performance and Power
| Specification | Details |
|---|---|
| Suction Power | Approx. 34 L/min |
| Vacuum Level | -0.8 bar at device input |
| Suction Levels | 4 predefined selectable suction levels |
| Battery Type | Lithium-ion |
| Battery Runtime | More than 60 minutes |
| Battery Replacement | Tool-free quick battery change |
Design and Workflow Features
| Feature | Benefit |
|---|---|
| Side Hose Holder | Provides practical storage for the suction tube |
| Wall Bracket Release | One-hand release by pressing the wall bracket mechanism |
| Easy Disassembly | Supports cleaning and disinfection workflow |
| Low Centre of Gravity | Helps improve tilt resistance |
| Automatic Functional Check | Provides fast visual and audible status feedback |
| Selectable Suction Levels | Allows suction setting selection according to requirement |
| Portable Battery Operation | Supports mobile rescue and emergency use |
Container and Filter System
| Component | Details |
|---|---|
| Standard Container | Multi-use container set included |
| Bacterial Filter | Disposable bacterial filter |
| Overflow Protection | Included |
| Optional System | Disposable suction bag system with integrated bacterial filter, depending on configuration |
Scope of Delivery
| Included Item | Details |
|---|---|
| ACCUVAC Pro Device | Included |
| Lithium-Ion Battery | Included |
| Multi-Use Container Set | Included |
| Operating Instructions | Included |
Benefits for Rescue Services
The ACCUVAC Pro is designed for fast access, reliable suction and practical handling in emergency care. Its battery-powered design, strong suction performance, one-hand wall bracket release and automatic functional check make it suitable for ambulance, rescue and pre-hospital workflows.
| Benefit | Description |
|---|---|
| Strong Suction Performance | Supports demanding emergency suction requirements |
| Mobile Operation | Battery runtime of more than 60 minutes supports rescue use |
| Quick Readiness Check | Automatic function control gives visual and audible feedback |
| Easy Handling | Hose holder and wall bracket release support rapid deployment |
| Patient Range | Suitable for toddlers, children and adults |
| Cleaning Support | Components can be disassembled for disinfection |
| Stable Design | Low centre of gravity helps reduce tipping risk |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Löwenstein Medical |
| Address | Kronsaalsweg 40, 22525 Hamburg, Germany |
| info@loewensteinmedical.de |
Suitable For
• Ambulance services
• Emergency medical services
• Rescue services
• Pre-hospital care teams
• Emergency departments
• Patient transport teams
• Airway suction workflows
• Secretion aspiration procedures
• Paediatric and adult emergency suction use
• Vacuum splint and vacuum mattress evacuation where applicable
Ordering Information
Please confirm the required container system, wall bracket, suction hose, filters, disposable suction bag system, charger, battery package and accessories before ordering.
Important: Use, cleaning, disinfection, battery charging and accessory replacement should follow the Löwenstein ACCUVAC Pro operating instructions and local infection-control procedures. Optional accessories and disposable suction systems may be configuration-dependent, so please confirm the exact package before ordering.
Weinmann ACCUVAC Lite Portable Suction Device
The Weinmann ACCUVAC Lite is a portable suction device designed for rescue services, emergency medical teams and pre-hospital care. It provides reliable suction support for airway management, secretion aspiration and emergency suction workflows in mobile clinical environments.
With a suction performance of approximately 26 L/min at -0.8 bar, four selectable suction levels and a lithium-ion battery option with a runtime of more than 40 minutes, the ACCUVAC Lite is designed for practical use in ambulances, rescue vehicles, emergency response settings and patient transport.
The device is suitable for toddlers, children and adults, and can be used for suction of secretions, food particles, endotracheal suction and bronchial suction where clinically appropriate.
Key Features
• Portable suction device for rescue and emergency medical services
• Suitable for pre-hospital and mobile care use
• Suction performance approx. 26 L/min at -0.8 bar
• Four predefined selectable suction levels
• Lithium-ion battery option with runtime of more than 40 minutes
• Tool-free quick battery change
• Automatic functional check with visual and audible feedback
• Multi-use container set included, depending on package
• Disposable bacterial filter and overflow protection
• Optional Serres disposable suction bag system with integrated bacterial filter, depending on configuration
• Tilt-resistant design due to low centre of gravity
• Side hose holder for practical suction tube storage
• One-hand release from wall bracket by pressing the release mechanism
• Components are easy to disassemble and disinfect
• Suitable for toddlers, children and adults
Product Overview
| Product | Details |
|---|---|
| Product Name | Weinmann ACCUVAC Lite |
| Brand | Weinmann |
| Product Type | Portable suction device |
| Main Use | Emergency suction, airway suction and secretion aspiration |
| Intended Setting | Rescue service, EMS, pre-hospital care and emergency response |
| Suction Performance | Approx. 26 L/min at -0.8 bar, measured at device input |
| Suction Levels | 4 predefined selectable levels |
| Battery | Optional / package-dependent |
| Battery Type | Lithium-ion battery |
| Battery Runtime | More than 40 minutes, where battery is supplied |
| Weight | 4.60 kg |
| Product ID | 000000196700001 |
| Item Number | WM11700-0000 |
| EAN | 0000000032452 |
Clinical and Emergency Use
| Application | Description |
|---|---|
| Secretion Suction | Supports removal of secretions |
| Food Particle Suction | Can assist with suction of food material where clinically appropriate |
| Endotracheal Suction | Supports airway suction through suitable endotracheal suction workflows |
| Bronchial Suction | Suitable for bronchial suction where clinically indicated |
| Pre-Hospital Care | Designed especially for rescue and emergency response environments |
| Vacuum Splints and Mattresses | Can support additional evacuation of vacuum splints and vacuum mattresses |
| Paediatric and Adult Use | Suitable for toddlers, children and adults |
Performance and Power
| Specification | Details |
|---|---|
| Suction Power | Approx. 26 L/min |
| Vacuum Level | -0.8 bar at device input |
| Suction Levels | 4 predefined selectable suction levels |
| Battery Type | Lithium-ion, where supplied |
| Battery Runtime | More than 40 minutes, where supplied |
| Battery Replacement | Tool-free quick battery change |
| Battery Status | Listed as optional in supplied product data; confirm package before ordering |
Design and Workflow Features
| Feature | Benefit |
|---|---|
| Side Hose Holder | Provides practical storage for the suction tube |
| Wall Bracket Release | One-hand release by pressing the wall bracket mechanism |
| Easy Disassembly | Supports cleaning and disinfection workflow |
| Low Centre of Gravity | Helps improve tilt resistance |
| Automatic Functional Check | Provides fast visual and audible status feedback |
| Selectable Suction Levels | Allows suction setting selection according to requirement |
| Portable Design | Supports rescue, transport and emergency care use |
Container and Filter System
| Component | Details |
|---|---|
| Standard Container | Multi-use container set included, depending on supplied package |
| Bacterial Filter | Disposable bacterial filter |
| Overflow Protection | Included |
| Optional System | Serres disposable suction bag system with integrated bacterial filter, depending on configuration |
Scope of Delivery
| Included Item | Details |
|---|---|
| ACCUVAC Lite Device | Included |
| Lithium-Ion Battery | Included or optional depending on package |
| Multi-Use Container Set | Included according to supplied product information |
| Manual | Included |
Benefits for Rescue Services
The ACCUVAC Lite is designed for fast access, reliable suction and practical handling in emergency care. Its portable format, selectable suction levels, one-hand wall bracket release and automatic functional check make it suitable for ambulance, rescue and pre-hospital workflows.
| Benefit | Description |
|---|---|
| Emergency-Ready Design | Suitable for rescue and pre-hospital suction workflows |
| Reliable Suction Performance | Approx. 26 L/min suction flow at -0.8 bar |
| Easy Deployment | One-hand release from wall bracket supports rapid access |
| Simple Operation | Four predefined suction levels simplify use |
| Quick Readiness Check | Automatic function control gives visual and audible feedback |
| Stable Handling | Low centre of gravity helps reduce tipping risk |
| Patient Range | Suitable for toddlers, children and adults |
| Cleaning Support | Components can be disassembled for disinfection |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Weinmann-EMT GmbH & Co. KG |
| Address | Frohbösestr. 12, 22525 Hamburg, Germany |
| info@weinmann-emt.de |
Suitable For
• Ambulance services
• Emergency medical services
• Rescue services
• Pre-hospital care teams
• Emergency departments
• Patient transport teams
• Airway suction workflows
• Secretion aspiration procedures
• Paediatric and adult emergency suction use
• Vacuum splint and vacuum mattress evacuation where applicable
Ordering Information
Please confirm the required container system, wall bracket, suction hose, filters, disposable suction bag system, charger, battery package and accessories before ordering.
Important: Battery supply may be configuration-dependent. Use, cleaning, disinfection, battery charging and accessory replacement should follow the Weinmann ACCUVAC Lite operating instructions and local infection-control procedures. Optional accessories and disposable suction systems should be confirmed before ordering.
ASSKEA M20 Mobile Suction Device
The ASSKEA M20 is a mobile analogue suction device designed for airway suction and secretion aspiration. It offers a simple and clear operating concept with vacuum display and secondary air suction control, making it suitable for clinical, care and mobile suction workflows.
With a suction performance of 18 L/min ±2 L/min, a 1000 ml reusable container system and integrated lithium-ion battery, the ASSKEA M20 provides reliable suction support where mobility is required. The device can operate for approximately 45 minutes on battery power and is charged using the associated 12 V power supply.
Key Features
• Mobile analogue suction device
• Designed for airway suction and secretion aspiration
• Simple vacuum display and suction control
• Secondary air regulation for suction adjustment
• Suction performance of 18 L/min ±2 L/min
• 1000 ml reusable container system
• Integrated lithium-ion battery
• Battery operating time approximately 45 minutes
• Charging time approximately 2 hours
• Operation and charging via associated 12 V power supply
• Compact and portable design
• Weight approximately 3.1 kg
• Suitable for mobile clinical, care and homecare suction workflows
Product Overview
| Product | Details |
|---|---|
| Product Name | ASSKEA M20 Suction Device |
| Brand | ASSKEA |
| Product Type | Mobile analogue suction device |
| Main Use | Airway suction and secretion aspiration |
| Suction Performance | 18 L/min ±2 L/min |
| Flow | 18 L/min |
| Container System | Reusable / multi-use container system |
| Container Capacity | 1000 ml |
| Battery | Yes |
| Battery Type | Lithium-ion battery |
| Battery Runtime | Approx. 45 minutes |
| Charging Time | Approx. 2 hours |
| Power Supply | 12 V power supply |
| AC Power / Amperage | 5 A, according to supplied product information |
| Weight | 3.10 kg |
| Product ID | 50-100003000001 |
| Item Number | 100003-3-MW + 100202 |
| EAN | 000000002865 |
Technical Specifications
| Specification | Details |
|---|---|
| Suction Power | 18 L/min ±2 L/min |
| Container Capacity | 1000 ml |
| Container Type | Multi-use / reusable container system |
| Weight | Approx. 3.1 kg |
| Battery Runtime | Approx. 45 minutes |
| Battery Type | Lithium-ion |
| Charging Time | Approx. 2 hours |
| Power Supply | Associated 12 V power supply |
| Operation | Mobile battery operation and power supply operation |
Clinical and Care Use
| Application | Description |
|---|---|
| Airway Suction | Supports removal of secretions from the airway |
| Secretion Aspiration | Suitable for general secretion aspiration workflows |
| Mobile Suction | Battery operation supports use away from mains power |
| Care Settings | Suitable for hospitals, clinics, care facilities and homecare settings where appropriate |
| Backup Suction | Can be used as a mobile suction device or backup suction unit |
Design and Workflow Benefits
The ASSKEA M20 is designed for straightforward daily use. Its analogue control concept allows easy vacuum adjustment, while the mobile battery-powered format supports use in different care areas.
| Feature | Benefit |
|---|---|
| Analogue Operation | Simple and familiar control concept |
| Vacuum Display | Allows the user to monitor suction level |
| Secondary Air Control | Supports suction adjustment according to requirement |
| Lithium-Ion Battery | Supports mobile operation |
| 1000 ml Container | Provides practical secretion collection capacity |
| 12 V Power Supply | Used for both charging and operation |
| Compact Weight | Easier to move and position during care |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | ASSKEA medical GmbH |
| Address | Haßlocher Str. 9, 99189 Gebesee, Germany |
| info@asskea.de |
Suitable For
• Hospitals
• Clinics
• Care facilities
• Community care settings
• Homecare suction support where appropriate
• Airway suction workflows
• Secretion aspiration procedures
• Mobile suction requirements
• Backup suction equipment stock
Ordering Information
Please confirm the required container system, hose set, bacterial filter, suction accessories, charger and 12 V power supply package before ordering.
Important: Battery runtime may vary depending on suction load, battery age and usage conditions. Use, cleaning, charging, maintenance and accessory replacement should follow the ASSKEA operating instructions and local infection-control procedures.
Medela Clario Battery Version Secretion Aspirator
The Medela Clario Battery Version is a compact and lightweight secretion aspirator designed for portable suction support in clinical, care and homecare environments. Weighing only 2 kg, it is easy to carry, position and use where mobile suction is required.
This battery-operated version includes an integrated lithium-ion battery, allowing the device to be used away from mains power when required. The Clario features a simple vacuum control system with three selectable suction levels: minimum, medium and maximum.
The device also includes a hygiene concept with float and collection chamber, designed to help prevent secretion overflow and reduce the risk of contamination inside the device.
Key Features
• Battery-operated secretion aspirator
• Compact and lightweight design — only 2 kg
• Integrated lithium-ion battery
• Maximum suction flow of 15 L/min
• Three vacuum settings: minimum, medium and maximum
• Vacuum range up to 550 mmHg
• Simple suction selection using control dial
• Hygiene concept with float and collection chamber
• Helps prevent secretion overflow
• Helps protect the inside of the device from contamination
• Suitable for mobile, clinical, care and homecare suction workflows
• Genuine Medela product information provided
Product Overview
| Product | Details |
|---|---|
| Product Name | Medela Clario Battery Version Secretion Aspirator |
| Brand | Medela |
| Product Type | Battery-operated secretion aspirator / suction device |
| Main Use | Secretion aspiration |
| Weight | 2.00 kg |
| Battery | Yes |
| Battery Type | Lithium-ion battery |
| Maximum Suction Flow | 15 L/min |
| Vacuum Settings | Minimum, medium and maximum |
| Minimum Vacuum Setting | 125 mmHg |
| Medium Vacuum Setting | 250 mmHg |
| Maximum Vacuum Setting | 550 mmHg |
| Hygiene System | Float and collection chamber |
| Product ID | 50-141142010001 |
| Item Number | 14114201 |
| EAN | 07612367009522 |
Vacuum Settings
| Setting | Vacuum Level |
|---|---|
| Minimum | 125 mmHg |
| Medium | 250 mmHg |
| Maximum | 550 mmHg |
Function and Use
| Function | Description |
|---|---|
| Secretion Aspiration | Supports removal of secretions using suction |
| Battery Operation | Allows portable use away from mains power |
| Vacuum Selection | Three selectable suction settings for simple operation |
| Overflow Protection | Float and collection chamber help prevent secretion overflow |
| Device Protection | Hygiene design helps reduce risk of internal contamination |
| Portable Use | Lightweight 2 kg design supports easy handling and movement |
Design and Workflow Benefits
The Medela Clario Battery Version is designed for straightforward suction use in different care environments. Its compact size, integrated battery and simple control dial make it practical for mobile suction support.
The hygiene system helps protect the device by reducing the risk of overflow, while the three vacuum settings allow the user to select the suction level required for the care situation.
| Feature | Benefit |
|---|---|
| Integrated Battery | Supports mobile suction use |
| Lightweight 2 kg Design | Easier to carry, move and position |
| Simple Control Dial | Allows quick suction level selection |
| Three Vacuum Settings | Supports controlled suction according to need |
| Float and Collection Chamber | Helps prevent secretion overflow |
| Compact Format | Suitable for clinical, care and homecare use |
| 15 L/min Suction Flow | Provides practical suction performance |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Suitable For
• Hospitals
• Clinics
• Community care settings
• Homecare suction support where appropriate
• Mobile secretion aspiration workflows
• Medical suction support
• Equipment replacement and backup stock
Ordering Information
Please confirm the required container set, safety chamber, suction hose, battery accessories, charger and power supply package before ordering.
Important: Use, cleaning, battery charging, maintenance and replacement of accessories should follow the Medela Clario operating instructions and local infection-control procedures. Battery runtime may vary depending on suction load, battery age and usage conditions.
Drive DeVilbiss VacuAide QSU 7314 Portable Suction Unit
The Drive DeVilbiss VacuAide QSU 7314 is a portable suction unit designed for effective suction of the upper respiratory tract in adults and newborns where clinically indicated. It is suitable for use at home, in care settings and on the move.
The VacuAide QSU combines strong suction performance with mobile flexibility. It provides a suction range from 50 to 550 mmHg and a flow rate of 27 L/min, making it suitable for a wide range of suction applications.
Supplied with battery, functional carry bag, 110–240 V multivolt power supply and 12 V vehicle adapter, the VacuAide QSU can be used both stationary and mobile. The integrated battery supports up to 60 minutes of mobile operation.
Key Features
• Portable suction unit for upper respiratory tract suction
• Suitable for adults and newborns where clinically indicated
• Suction range from 50 to 550 mmHg
• Flow rate of 27 L/min
• Stepless vacuum regulation
• Patented vacuum regulation integrated directly into the pressure gauge
• Clear LED display for device status information
• Integrated battery LED warning system
• Battery operation up to 60 minutes
• Supplied with 110–240 V multivolt power supply
• Supplied with 12 V vehicle adapter
• Functional carry bag included
• Double overflow protection
• Optimised filter system
• Hydrophobic self-closing bacterial filter
• Mechanical float protection
• Can be operated inside or outside the carry bag
• Suitable for home use and travel
Product Overview
| Product | Details |
|---|---|
| Product Name | Drive DeVilbiss VacuAide QSU 7314 |
| Brand | Drive DeVilbiss |
| Product Type | Portable suction unit |
| Main Use | Suction of the upper respiratory tract |
| Patient Use | Adults and newborns where clinically indicated |
| Suction Range | 50 to 550 mmHg |
| Flow Rate | 27 L/min |
| Vacuum Regulation | Stepless regulation integrated into pressure gauge |
| Battery | Yes |
| Battery Type | Lithium-ion battery |
| Battery Runtime | Up to 60 minutes |
| Power Supply | 100–240 V, 50–60 Hz multivolt power supply |
| Vehicle Power | 12 V vehicle adapter included |
| Weight | 3.00 kg |
| Product ID | 50-7314P-NE0001 |
| Item Number | 7314P-NE |
| EAN | 000000001377 |
Performance
| Specification | Details |
|---|---|
| Suction Range | 50 to 550 mmHg |
| Flow Rate | 27 L/min |
| Vacuum Adjustment | Stepless |
| Standard Reference | Meets high demands of ISO 10079-1 according to supplied product information |
| Battery Runtime | Up to 60 minutes |
| Mains Power | 100–240 V AC, 50–60 Hz |
| Vehicle Use | 12 V vehicle adapter included |
Scope of Delivery
| Included Item | Details |
|---|---|
| VacuAide QSU 7314 Suction Unit | Included |
| Battery | Included |
| Functional Carry Bag | Included |
| 110–240 V Multivolt Power Supply | Included |
| 12 V Vehicle Adapter | Included |
| Secretion Container / Collection System | Included according to supplied package |
Clinical and Care Use
| Application | Description |
|---|---|
| Upper Respiratory Tract Suction | Supports suction of secretions from the upper airway |
| Homecare Use | Suitable for home use where clinically appropriate |
| Mobile Use | Battery and vehicle adapter support use on the go |
| Newborn Use | Suitable for newborns where clinically indicated |
| Adult Use | Suitable for adult suction requirements |
| Travel Use | Multivolt power supply supports international use with correct power cord |
Operation
The VacuAide QSU is designed to be intuitive and easy to use. The vacuum regulation is integrated directly into the pressure gauge, allowing quick and stepless adjustment of suction power up to the maximum suction level.
The device can be operated both inside and outside the supplied functional carry bag. When used in the bag, the main operating and control elements remain accessible.
| Feature | Benefit |
|---|---|
| Stepless Vacuum Regulation | Allows precise suction adjustment |
| Pressure Gauge Control | Vacuum regulation is integrated into the pressure gauge |
| LED Status Display | Provides clear device information |
| Battery Warning System | Helps monitor battery status |
| Functional Carry Bag | Supports mobile use and storage |
| Vehicle Adapter | Allows charging or operation using 12 V vehicle power |
Hygiene and Safety
The VacuAide QSU includes double overflow protection to help protect the suction unit during use. The system uses a hydrophobic self-closing bacterial filter and an additional mechanical float to help prevent liquid from being drawn into the device.
| Safety Feature | Description |
|---|---|
| Double Overflow Protection | Helps protect the suction unit from liquid ingress |
| Hydrophobic Bacterial Filter | Helps block liquid and contamination |
| Self-Closing Filter System | Helps protect the device during overflow risk |
| Mechanical Float | Provides additional overflow protection |
| Optimised Filter System | Supports safer suction operation |
Container and Patient Hose Information
The secretion container and patient hose are single-patient-use products. They must be replaced when changing patient.
The 800 ml container and lid should be cleaned after each use using a warm solution of water and washing-up liquid, then rinsed with clear warm water and placed into a vinegar/water mixture according to the instructions for use.
| Item | Guidance |
|---|---|
| Secretion Container | Single-patient-use product |
| Patient Hose | Single-patient-use product |
| Patient Change | Replace container and hose |
| Cleaning | Follow the instructions for use |
| Full Cleaning Instructions | Refer to the user manual |
Travel and International Use
A special voltage transformer is not normally required because the VacuAide QSU has a switchable power supply that automatically adapts to voltages from 100 to 240 V AC at 50 or 60 Hz.
However, the correct country-specific power cord must be used for the country of operation. Country-specific power cords may need to be ordered separately as accessories.
| Travel Feature | Details |
|---|---|
| Voltage Transformer | Not normally required |
| Power Input | 100–240 V AC, 50–60 Hz |
| Country-Specific Cord | Required according to destination country |
| Vehicle Adapter | 12 V vehicle adapter included |
| Mobile Runtime | Up to 60 minutes on battery |
Design and Workflow Benefits
| Feature | Benefit |
|---|---|
| Portable Design | Suitable for home and travel use |
| Battery Operation | Supports use away from mains power |
| Functional Carry Bag | Keeps the unit and accessories together |
| Clear LED Display | Helps users check device status quickly |
| Stepless Suction Control | Allows suction power to be adjusted to need |
| Double Overflow Protection | Helps protect the device during aspiration |
| Multivolt Power Supply | Supports use in different countries with correct cord |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | DeVilbiss Healthcare |
| Address | 100 DeVilbiss Drive, Somerset, PA 15501, USA |
| info@devilbisshealthcare.com | |
| Telephone | +1 800 338 1988 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | DeVilbiss Healthcare GmbH |
| Address | Kamenzer Str. 3, 68309 Mannheim, Germany |
| kontakt@devilbisshc.com | |
| Telephone | +49 621 17898230 |
Suitable For
• Homecare suction support
• Upper respiratory tract suction
• Adults and newborns where clinically indicated
• Clinics
• Community care settings
• Patient transport
• Travel use
• Backup suction equipment
• Mobile suction requirements
Ordering Information
Please confirm the required container type, hose, bacterial filter, power cord, battery package, carry bag and accessories before ordering.
Important: The secretion container and patient hose are single-patient-use products and should be replaced when changing patient. Use, cleaning, charging, maintenance and accessory replacement should follow the Drive DeVilbiss VacuAide QSU instructions for use and local infection-control procedures.
V-Vac Hand Powered Manual Suction Unit is supplied by Nass Ventures for clinical procurement, emergency care, healthcare facilities and medical equipment supply projects.
This product sits within the aspirators and pumps range and may be suitable for suction, aspiration, airway management, replacement parts, accessories or related medical support workflows depending on the product type.
Key Details
- Product type: Manual Suction Unit
- Brand / vendor: Laerdal
- Supplier SKU reference: VVAC
- Supplier availability noted at source: Backorder
- Suitable for medical procurement and healthcare supply enquiries
Ordering Information
Please contact Nass Ventures to confirm current availability, final quotation, compatible accessories, delivery options and any technical requirements before ordering.
Welch Allyn Halogen HPX Bulb for FO Laryngoscope Handles is supplied by Nass Ventures for clinical procurement, emergency care, healthcare facilities and medical equipment supply projects.
This product sits within the aspirators and pumps range and may be suitable for suction, aspiration, airway management, replacement parts, accessories or related medical support workflows depending on the product type.
Key Details
- Product type: Replacement Bulb
- Brand / vendor: Welch Allyn
- Supplier SKU reference: 06000-U
- Supplier availability noted at source: Backorder
- Suitable for medical procurement and healthcare supply enquiries
Ordering Information
Please contact Nass Ventures to confirm current availability, final quotation, compatible accessories, delivery options and any technical requirements before ordering.
OB2012 Emergency Portable Suction Unit with Disposable Liner is supplied by Nass Ventures for clinical procurement, emergency care, healthcare facilities and medical equipment supply projects.
This product sits within the aspirators and pumps range and may be suitable for suction, aspiration, airway management, replacement parts, accessories or related medical support workflows depending on the product type.
Key Details
- Product type: Portable Suction Unit
- Brand / vendor: Medisave UK
- Supplier SKU reference: ASP001
- Supplier availability noted at source: Backorder
- Suitable for medical procurement and healthcare supply enquiries
Ordering Information
Please contact Nass Ventures to confirm current availability, final quotation, compatible accessories, delivery options and any technical requirements before ordering.