Best Seller
Bedside/Patient Monitor
Mindray BeneVision N15 Patient Monitor
The Mindray BeneVision N15 is a modular high-definition monitor from the BeneVision N-Series platform, suitable for intensive care, operating theatres and post-operative observation. The 15.6-inch Full HD touchscreen provides clear monitoring data while modular options allow the system to be configured for different clinical acuity levels.
Key Features and Benefits
- 15.6-inch Full HD capacitive touchscreen supports multitouch operation.
- Standard monitoring includes ECG, SpO2, NIBP, IBP, respiration and temperature.
- Optional advanced parameters include CO2, multi-gas, PiCCO, ICG, NMT, BIS, rSO2 and 12-lead ECG analysis.
- Supports N-Series modules and N1 transport module for flexible care pathways.
- Clinical assistance and connectivity functions support ICU and theatre workflows.
Technical Overview
- Display: 15.6-inch capacitive touchscreen, 1920 x 1080 pixels
- Weight: Approx. 5.4 kg without modules
- Waveforms: Up to 10 displayed waveforms
- Connection: Ethernet, optional Wi-Fi and HL7 support
- Patients: Adult, paediatric and neonatal
Ordering Information
This product is available for quotation and supply based on the required specification, quantity, and delivery location. Final pricing may vary depending on the selected configuration, accessories, availability, and any additional service requirements.
To request a quotation, please provide:
- Product name or model
- Required quantity
- Delivery location
- Intended use or department
- Required configuration or options
- Any accessories or consumables needed
- Installation, training, or maintenance requirements, if applicable
Supply and Delivery
We can assist with product sourcing, procurement, and delivery for hospitals, clinics, laboratories, universities, research centres, and healthcare facilities. Delivery options may vary depending on product size, weight, destination, stock availability, and import requirements.
For larger or technical equipment, delivery may include coordination for safe handling, site access, installation readiness, and commissioning support where required.
Configuration and Accessories
Some products may be available in different configurations or with optional accessories. The final specification should be confirmed before ordering to ensure the product is suitable for the intended application.
Common options may include:
- Standard or advanced model configuration
- Required accessories
- Consumables or starter kits
- Mounting or trolley options
- Power requirements
- Software or upgrade options
- Spare parts and maintenance items
Warranty and After-Sales Support
Warranty terms depend on the product, manufacturer, supplier, and selected package. Where applicable, we can support customers with setup guidance, user training, preventive maintenance, spare parts sourcing, and long-term technical assistance.
Customers are encouraged to confirm warranty coverage, service terms, and consumable availability before purchase.
Important Note
Product specifications, images, availability, accessories, and prices may vary depending on manufacturer updates, regional supply, and selected configuration. Final details should be confirmed at quotation stage before purchase.
Mindray BeneVision N17 Patient Monitor
The Mindray BeneVision N17 is a powerful modular patient monitor for intensive care, emergency and operating-room use. It combines an 18.5-inch Full HD touchscreen with N-Series modularity, advanced physiological monitoring and data integration for high-acuity clinical environments.
Key Features and Benefits
- 18.5-inch Full HD touchscreen displays up to 12 waveforms.
- Supports ECG, SpO2, NIBP, IBP, respiration and temperature monitoring.
- Advanced module options include CO2, multi-gas, PiCCO, ICG, NMT, BIS and rSO2.
- Compatible with the N1 transport module for continuous monitoring during transfer.
- Network integration supports BeneVision DMS and HL7 EMR workflows.
Technical Overview
- Display: 18.5-inch capacitive touchscreen TFT LCD, 1920 x 1080 pixels
- Weight: Approx. 7.3 kg without modules
- Modularity: Mindray N-Series modules and N1 transport module
- Connection: Ethernet, optional Wi-Fi and HL7 support
- Patients: Adult, paediatric and neonatal
Ordering Information
This product is available for quotation and supply based on the required specification, quantity, and delivery location. Final pricing may vary depending on the selected configuration, accessories, availability, and any additional service requirements.
To request a quotation, please provide:
- Product name or model
- Required quantity
- Delivery location
- Intended use or department
- Required configuration or options
- Any accessories or consumables needed
- Installation, training, or maintenance requirements, if applicable
Supply and Delivery
We can assist with product sourcing, procurement, and delivery for hospitals, clinics, laboratories, universities, research centres, and healthcare facilities. Delivery options may vary depending on product size, weight, destination, stock availability, and import requirements.
For larger or technical equipment, delivery may include coordination for safe handling, site access, installation readiness, and commissioning support where required.
Configuration and Accessories
Some products may be available in different configurations or with optional accessories. The final specification should be confirmed before ordering to ensure the product is suitable for the intended application.
Common options may include:
- Standard or advanced model configuration
- Required accessories
- Consumables or starter kits
- Mounting or trolley options
- Power requirements
- Software or upgrade options
- Spare parts and maintenance items
Warranty and After-Sales Support
Warranty terms depend on the product, manufacturer, supplier, and selected package. Where applicable, we can support customers with setup guidance, user training, preventive maintenance, spare parts sourcing, and long-term technical assistance.
Customers are encouraged to confirm warranty coverage, service terms, and consumable availability before purchase.
Important Note
Product specifications, images, availability, accessories, and prices may vary depending on manufacturer updates, regional supply, and selected configuration. Final details should be confirmed at quotation stage before purchase.
Mindray BeneVision N19 Patient Monitor
The Mindray BeneVision N19 is a high-end modular monitor for critically ill patients in ICU, operating room and emergency settings. The 19-inch high-definition touchscreen supports multitouch operation, flexible viewing and advanced modular monitoring for adult, paediatric and neonatal care.
Key Features and Benefits
- 19-inch capacitive touchscreen with high-resolution display for complex critical-care monitoring.
- Supports ECG, SpO2, NIBP, IBP, respiration and temperature.
- Advanced options include CO2, multi-gas, NMT, BIS, rSO2 and cardiac output.
- N1 transport monitor integration enables continuity during patient transfer.
- Connectivity supports central monitoring and EMR integration through HL7.
Technical Overview
- Display: 19-inch capacitive touchscreen, 1680 x 1050 pixels
- Module slots: N1 transport slot plus expansion slots
- Measurements: ECG, SpO2, NIBP, IBP, respiration and temperature; advanced options available
- Connection: BeneVision DMS and HL7 EMR support
- Patients: Adult, paediatric and neonatal
Ordering Information
This product is available for quotation and supply based on the required specification, quantity, and delivery location. Final pricing may vary depending on the selected configuration, accessories, availability, and any additional service requirements.
To request a quotation, please provide:
- Product name or model
- Required quantity
- Delivery location
- Intended use or department
- Required configuration or options
- Any accessories or consumables needed
- Installation, training, or maintenance requirements, if applicable
Supply and Delivery
We can assist with product sourcing, procurement, and delivery for hospitals, clinics, laboratories, universities, research centres, and healthcare facilities. Delivery options may vary depending on product size, weight, destination, stock availability, and import requirements.
For larger or technical equipment, delivery may include coordination for safe handling, site access, installation readiness, and commissioning support where required.
Configuration and Accessories
Some products may be available in different configurations or with optional accessories. The final specification should be confirmed before ordering to ensure the product is suitable for the intended application.
Common options may include:
- Standard or advanced model configuration
- Required accessories
- Consumables or starter kits
- Mounting or trolley options
- Power requirements
- Software or upgrade options
- Spare parts and maintenance items
Warranty and After-Sales Support
Warranty terms depend on the product, manufacturer, supplier, and selected package. Where applicable, we can support customers with setup guidance, user training, preventive maintenance, spare parts sourcing, and long-term technical assistance.
Customers are encouraged to confirm warranty coverage, service terms, and consumable availability before purchase.
Important Note
Product specifications, images, availability, accessories, and prices may vary depending on manufacturer updates, regional supply, and selected configuration. Final details should be confirmed at quotation stage before purchase.
Mindray BeneVision N12 Patient Monitor
The Mindray BeneVision N12 is a compact high-performance modular monitor for ICU, resuscitation and operating-room environments. It features a 12.1-inch touchscreen, N-Series modular compatibility and advanced monitoring options for adult, paediatric and neonatal patients.
Key Features and Benefits
- 12.1-inch high-resolution capacitive touchscreen provides clear parameter display.
- Supports ECG, SpO2, NIBP, IBP, respiration and temperature as core parameters.
- Optional modules include 12-lead ECG, CO2, multi-gas, NMT, BIS, rSO2, PiCCO and ICG.
- N1 transport module compatibility supports uninterrupted monitoring during transfer.
- DMS and HL7 integration support centralized monitoring and EMR connectivity.
Technical Overview
- Display: 12.1-inch capacitive touchscreen, 1280 x 800 pixels
- Interface: USB, Ethernet, BeneLink and VGA
- Storage: Up to 120 hours of trends, 1000 NIBP measurements and 48 hours full disclosure
- Modularity: N-Series modules and N1 transport module support
- Patients: Adult, paediatric and neonatal
Ordering Information
This product is available for quotation and supply based on the required specification, quantity, and delivery location. Final pricing may vary depending on the selected configuration, accessories, availability, and any additional service requirements.
To request a quotation, please provide:
- Product name or model
- Required quantity
- Delivery location
- Intended use or department
- Required configuration or options
- Any accessories or consumables needed
- Installation, training, or maintenance requirements, if applicable
Supply and Delivery
We can assist with product sourcing, procurement, and delivery for hospitals, clinics, laboratories, universities, research centres, and healthcare facilities. Delivery options may vary depending on product size, weight, destination, stock availability, and import requirements.
For larger or technical equipment, delivery may include coordination for safe handling, site access, installation readiness, and commissioning support where required.
Configuration and Accessories
Some products may be available in different configurations or with optional accessories. The final specification should be confirmed before ordering to ensure the product is suitable for the intended application.
Common options may include:
- Standard or advanced model configuration
- Required accessories
- Consumables or starter kits
- Mounting or trolley options
- Power requirements
- Software or upgrade options
- Spare parts and maintenance items
Warranty and After-Sales Support
Warranty terms depend on the product, manufacturer, supplier, and selected package. Where applicable, we can support customers with setup guidance, user training, preventive maintenance, spare parts sourcing, and long-term technical assistance.
Customers are encouraged to confirm warranty coverage, service terms, and consumable availability before purchase.
Important Note
Product specifications, images, availability, accessories, and prices may vary depending on manufacturer updates, regional supply, and selected configuration. Final details should be confirmed at quotation stage before purchase.
Mindray BeneVision N1 Transport Patient Monitor
The Mindray BeneVision N1 is a compact transport monitor designed to follow the patient across care areas. It can be used as a stand-alone monitor or as a transport module within a wider BeneVision monitoring environment, depending on system configuration.
Key Features
- 5.5-inch display for mobile and bedside use
- Transport module design for intra-hospital transfer
- ECG, respiration, NIBP, SpO2, temperature and pulse-rate monitoring depending on configuration
- Drop protection and wide viewing angle referenced by the source page
- Useful for continuity of monitoring between departments
Specification Highlights
- Display: 5.5-inch class screen
- Parameters: ECG, respiration, blood pressure, heart rate, SpO2 and temperature depending on configuration
- Application: portable monitoring and transport workflows
- Design: compact patient-side module
Clinical Applications
- Patient transport
- Emergency departments
- Operating theatre transfer
- ICU step-down and recovery
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Storm DS5 Modular Patient Monitor
The Dixion Storm DS5 is a modular patient monitor for bedside and acute-care environments. It is designed to present multiple waveforms on a touchscreen display and can be configured for department-specific monitoring needs.
Key Features
- Modular construction
- 12.1-inch touchscreen display
- Waveform display up to 11 curves referenced by source page
- Designed for patient monitoring in clinical departments
- Configuration and accessories should be confirmed before ordering
Specification Highlights
- Display: 12.1-inch touchscreen
- Waveforms: up to 11 waveform displays
- Monitoring parameters depend on module and accessory configuration
- Vendor: Dixion
Clinical Applications
- ICU and HDU
- Emergency departments
- Recovery rooms
- General bedside monitoring
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Storm D1 Handheld Capnograph with NIBP and SpO2
The Dixion Storm D1 is a touchscreen handheld capnograph for portable respiratory monitoring. This configuration is referenced with NIBP and SpO2 support, making it suitable for spot-check and mobile patient-assessment workflows.
Key Features
- EtCO2 and respiration-rate monitoring
- NIBP and SpO2 configuration referenced by source page
- Optional pulse rate and perfusion index depending on configuration
- 4.3-inch display with 480 x 272 px resolution
- Compact hand-held format
Specification Highlights
- Display: 4.3-inch, 480 x 272 px
- Monitoring: EtCO2, respiration rate, NIBP and SpO2 depending on configuration
- Optional: pulse rate and perfusion index
- SpO2 technology may vary by supplied configuration
Clinical Applications
- Emergency assessment
- Recovery rooms
- Anaesthesia support
- Transport and mobile monitoring
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Storm 5900 Portable ICU Monitor with CO2 Capnometry
The Dixion Storm 5900 is a portable intensive-care monitor with capnometry for high-acuity observation. It combines waveform display, trend recording and optional printing support in a mobile monitoring format.
Key Features
- 10.4-inch TFT display
- Displays up to 11 waveforms referenced by source page
- Built-in thermal printer referenced by source page
- Invasive blood pressure measurement and capnometry referenced by source page
- Trend storage for recent parameter history depending on configuration
Specification Highlights
- Display: colour TFT, 10.4 inches
- Waveforms: up to 11
- Printer: built-in thermal printer
- Parameters: IBP and capnometry referenced by source page
Clinical Applications
- ICU
- Emergency departments
- Theatre recovery
- Transport within high-acuity areas
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Storm 5500 Patient Monitor with CO2 Capnometry
The Dixion Storm 5500 is an ICU-style patient monitor configured with CO2 capnometry. It is intended for continuous bedside observation where ECG, CO2 and network-compatible monitoring are required.
Key Features
- LCD screen
- Monoblock design
- 3- or 5-lead ECG support referenced by source page
- CO2 capnometry module
- LAN compatibility referenced by source page
Specification Highlights
- Display: LCD
- ECG: 3 or 5 leads referenced by source page
- CO2: capnometry module
- Network: LAN compatibility referenced by source page
Clinical Applications
- ICU
- Emergency departments
- Operating room recovery
- High-dependency units
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Instilar 1487 Enteral Feeding Pump
The Dixion Instilar 1487 is a volumetric pump for enteral feeding and tube-feeding applications. It supports adjustable flow-rate delivery and includes a heater function for facilities that require controlled enteral nutrition delivery.
Key Features
- Designed for enteral feeding / tube-feeding use
- Flow-rate setting from 1 to 2000 ml/h referenced by source page
- Selectable rate steps of 1, 5 and 10 ml/h referenced by source page
- Built-in heater range of 30-40 degrees C referenced by source page
- Suitable for nutritional support workflows depending on protocol
Specification Highlights
- Flow-rate range: 1-2000 ml/h
- Rate step: 1, 5 or 10 ml/h
- Heater: 30-40 degrees C in 1-degree increments
- Use only with compatible enteral-feeding sets and local clinical protocols
Clinical Applications
- Nutrition support units
- ICU and HDU
- Long-term care facilities
- Hospital wards
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
GE Healthcare B125 Bedside Patient Monitor
The GE Healthcare B125 is a bedside patient monitor designed for multi-parameter observation in ward, neonatal and acute-care environments. It provides a touchscreen interface, waveform display and monitoring tools for routine and higher-acuity patient care.
Key Features
- 12.1-inch touchscreen display
- Display of up to 12 waveforms depending on configuration
- Arrhythmia analysis and NIBP monitoring
- Enhanced SpO2 monitoring referenced by source page
- Neonatal measurement support referenced by source page
Specification Highlights
- Display: 12.1-inch touchscreen
- Waveform display: up to 12 waveforms
- Parameters: ECG, SpO2, NIBP and neonatal measurements depending on configuration
- Clinical use: bedside vital-signs monitoring
Clinical Applications
- Neonatal care
- General wards
- Emergency departments
- High-dependency areas
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Storm DS1 Portable Pulse Oximeter
The Dixion Storm DS1 is a portable medical pulse oximeter for spot-checking and bedside observation of oxygen saturation and pulse rate. It is suitable for wards, outpatient departments and mobile clinical use where compact monitoring is required.
Key Features
- 2.4-inch colour OLED display
- Displays SpO2 waveforms and numerical values
- Pulse-rate and perfusion-index information referenced by the source page
- Battery or charger operation depending on supplied configuration
- Alarm and pulse-audio support
Specification Highlights
- Display: 2.4-inch colour OLED
- Measurements: SpO2, pulse rate and perfusion index
- Power: battery / charger arrangement depending on supplied version
- Use: portable monitoring and spot checks
Clinical Applications
- Wards
- Outpatient clinics
- Recovery areas
- Ambulance and mobile clinical use
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
GE Healthcare CARESCAPE One Patient Monitoring System
GE Healthcare CARESCAPE One is a modular patient monitoring system designed to bring configurable measurements closer to the patient. It can be bed-mounted and used as part of a wider CARESCAPE monitoring environment depending on hospital infrastructure.
Key Features
- Patient-side modular monitoring design
- Can be attached to the patient bed according to the source page
- Configurable measurement set through modular architecture
- Supports flexible monitoring workflows across departments
- Designed for integration into clinical monitoring systems depending on configuration
Specification Highlights
- System type: modular patient monitoring platform
- Mounting: bed-mounted use referenced by source page
- Measurements: configurable according to modules
- Compatibility and central monitoring integration must be confirmed before ordering
Clinical Applications
- ICU
- Emergency departments
- Operating room recovery
- Hospital-wide patient monitoring networks
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Mindray ePM Series Modular Bedside Patient Monitors
The Mindray ePM Series is a family of modular bedside patient monitors designed for flexible patient observation across a hospital. It is suitable for facilities needing a configurable platform with multiple screen sizes, waveform display and mounting options.
Key Features
- Display sizes from approximately 30 to 43 cm referenced by the source page
- Up to 12 waveforms depending on model and configuration
- Modular system architecture
- Multiple mounting options
- Suitable for ward, emergency and critical-care environments
Specification Highlights
- Screen range: approximately 30 to 43 cm
- Waveform display: up to 12 waveforms depending on configuration
- Mounting: multiple support options
- Parameters vary by model, modules and accessories
Clinical Applications
- General wards
- Emergency departments
- Recovery rooms
- High-dependency units
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Mindray BeneVision N17 / N15 / N12 Patient Monitors
The Mindray BeneVision N17, N15 and N12 monitors provide scalable bedside monitoring across acuity levels. The range is suitable for hospitals needing a consistent platform with different display sizes for ward, emergency, perioperative and intensive-care areas.
Key Features
- 12-inch, 15-inch and 17-inch display options
- Transport module support depending on configuration
- ECG, respiration, NIBP, heart rate, SpO2 and temperature monitoring
- Drop protection and wide viewing angle referenced by the source page
- Expandable modular options depending on department need
Specification Highlights
- Display options: 12, 15 and 17 inches
- Core monitoring: ECG, SpO2, NIBP, respiration, temperature and heart rate
- Possible SpO2 technologies: Mindray, Nellcor or Masimo depending on configuration
- Advanced modules should be confirmed before purchase
Clinical Applications
- ICU and HDU
- Emergency departments
- Operating rooms
- General wards requiring scalable monitoring
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Storm D2 Transport Patient Monitor
The Dixion Storm D2 is a lightweight transport patient monitor intended for mobile monitoring and patient transfer. Its compact design and charging station make it practical for departments that need quick movement between bedside, treatment and transfer areas.
Key Features
- Lightweight transport monitor design
- Approximate weight of 600 g referenced by the source page
- Touchscreen interface
- Dedicated charging station
- Suitable for mobile observation and short-distance transfer workflows
Specification Highlights
- Weight: 600 g referenced by source page
- Interface: touchscreen
- Docking: charging station referenced by source page
- Monitoring parameters depend on the configured version and accessories
Clinical Applications
- Patient transport
- Ambulatory areas
- Emergency departments
- Short-stay observation
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Triton MPR 6-03 Intensive Care Patient Monitor
The Triton MPR 6-03 is an intensive-care patient monitor for continuous observation in resuscitation and acute-care departments. It is positioned for central haemodynamic monitoring workflows and may support direct-flow capnography depending on configuration.
Key Features
- Designed for intensive-care and resuscitation settings
- Non-invasive monitoring of central haemodynamic parameters referenced by the source page
- Automatic additional blood-pressure measurement functionality
- Direct-flow capnography support depending on configuration
- Useful where continuous multi-parameter monitoring is required
Specification Highlights
- Monitoring focus: haemodynamics and vital signs
- Capnography: direct-flow capnography referenced by source page
- Blood pressure: automatic additional measurements referenced by source page
- Configuration should be confirmed before ordering
Clinical Applications
- Resuscitation rooms
- ICU
- Emergency departments
- High-dependency units
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
GE Healthcare B155 Modular Bedside Patient Monitor
The GE Healthcare B155 is a modular bedside patient monitor for flexible monitoring in acute-care areas. It supports essential bedside parameters with options for anaesthesia-related measurements and additional monitoring modules depending on the clinical configuration.
Key Features
- 15.6-inch class bedside display
- ECG, SpO2, temperature, NIBP and respiration monitoring
- Optional neuromuscular transmission, entropy, capnometry and gas analysis
- Modular design for department-specific configuration
- Suitable for anaesthesia, recovery and high-dependency monitoring workflows
Specification Highlights
- Display: 15.6-inch class screen
- Core monitoring: ECG, pulse oximetry, temperature, NIBP and respiration
- Optional modules: NMT, entropy, capnometry and gas analysis depending on configuration
- Manufacturer: GE Healthcare
Clinical Applications
- Operating theatres
- Anaesthesia departments
- Recovery rooms
- Critical-care and high-dependency units
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Mindray BeneVision N19 / N22 Modular Patient Monitors
The Mindray BeneVision N19 and N22 are high-acuity modular bedside monitors with large-format displays for intensive care, theatre recovery and specialist monitoring areas. They are intended for departments requiring advanced waveform visibility and expandable parameter monitoring.
Key Features
- Available with 19-inch or 22-inch display options
- Screen and interface rotation for flexible viewing
- Modular measurement architecture for advanced monitoring
- Supports regional tissue oxygenation monitoring depending on configuration
- Large display format for high-acuity bedside environments
Specification Highlights
- Display: 19-inch or 22-inch options
- Core parameters: ECG, SpO2, NIBP, respiration and temperature depending on modules
- Expandable options may include invasive pressure, multi-gas, cardiac output or other advanced modules
- Mounting and configuration should be confirmed before ordering
Clinical Applications
- ICU and HDU
- Operating rooms
- Recovery and post-anaesthesia care
- Specialist high-acuity units
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
GE Healthcare B105 Bedside Patient Monitor
The GE Healthcare B105 is a compact bedside patient monitor for routine ward, emergency, recovery and critical-care observation. It is designed for facilities that need essential vital-signs monitoring with a clear touchscreen interface and practical bedside workflow.
Key Features
- 10.1-inch touchscreen display for bedside viewing
- Display of up to 12 waveforms depending on configuration
- NIBP, SpO2, ECG and arrhythmia analysis support
- Early warning functionality to support patient deterioration review
- Suitable for adult, paediatric and neonatal monitoring depending on configuration
Specification Highlights
- Screen: 10.1-inch class touchscreen
- Monitoring: ECG, SpO2, NIBP and related vital signs depending on module/options
- ECG: 4-lead analysis referenced by the source page
- Workflow: bedside monitoring with visual waveforms and alarm support
Clinical Applications
- Hospital wards
- Recovery rooms
- Emergency areas
- High-dependency and step-down units
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
ECG Monitoring Cables
ECG monitoring cables are patient-monitoring accessories used to connect ECG leads to compatible monitors. They support standard and expanded ECG monitoring depending on lead count and monitor compatibility.
Key Features
- ECG monitoring cable category
- 3-lead and 5-lead options for standard monitoring workflows
- 12-lead options for extended monitoring of cardiovascular patients
- Compatibility must be confirmed by monitor brand, connector and lead set requirement
Specification Highlights
- 3-lead, 5-lead and 12-lead monitoring options depending on product selection
- Patient monitoring accessory
- Connector compatibility must be confirmed before ordering
Clinical Applications
- Ward and ICU patient monitoring
- Cardiology departments
- Emergency departments
- Replacement accessory procurement
Procurement and Configuration Notes
- Please confirm monitor model, connector type, patient size, lead count and accessory compatibility before ordering.
- Confirm quantity, destination, installation requirements, warranty expectations, training needs and after-sales support before purchase.
- Images and source-page specifications are indicative; final supplied accessories and configuration should be confirmed against the manufacturer or supplier quotation.
Dixion Storm D1 Handheld Touchscreen Capnograph
The Dixion Storm D1 is a handheld touchscreen capnograph for EtCO2 and respiratory-rate monitoring, with optional additional pulse oximetry parameters depending on configuration.
Key Features
- Handheld touchscreen capnograph
- Measures EtCO2 and respiratory rate
- Optional SpO2, pulse rate, perfusion index and Nellcor SpO2 support depending on configuration
- Compact interface for mobile respiratory monitoring
- Suitable for procedural, emergency and transport monitoring workflows depending on accessories
Specification Highlights
- 4.3 inch touchscreen display
- 480 x 272 px display resolution
- EtCO2 and respiratory-rate monitoring
- Optional SpO2 and pulse parameters
Clinical Applications
- Anaesthesia and recovery
- Emergency departments
- Patient transport
- Respiratory monitoring and procedural sedation
Procurement and Configuration Notes
- Please confirm EtCO2 sampling method, patient category, disposables, SpO2 option and accessories before ordering.
- Confirm quantity, destination, installation requirements, warranty expectations, training needs and after-sales support before purchase.
- Images and source-page specifications are indicative; final supplied accessories and configuration should be confirmed against the manufacturer or supplier quotation.
NIBP Blood Pressure Cuffs
NIBP cuffs are used for oscillometric non-invasive blood pressure measurement with compatible patient monitors and vital-sign systems. Correct cuff size and connector compatibility are essential for reliable monitoring workflow.
Key Features
- Cuffs for non-invasive blood pressure measurement
- Supports oscillometric blood pressure monitoring method
- Available in different sizes and connector types depending on compatibility
- Used as replacement, spare or department stock accessory
Specification Highlights
- NIBP cuff accessory category
- Oscillometric blood pressure monitoring support
- Compatibility depends on monitor, hose and connector type
Clinical Applications
- Patient monitors
- Vital signs monitors
- ICU, ward, theatre and outpatient departments
- Routine replacement and maintenance stock
Procurement and Configuration Notes
- Please confirm monitor model, connector type, patient size, lead count and accessory compatibility before ordering.
- Confirm quantity, destination, installation requirements, warranty expectations, training needs and after-sales support before purchase.
- Images and source-page specifications are indicative; final supplied accessories and configuration should be confirmed against the manufacturer or supplier quotation.
GE Healthcare CARESCAPE Canvas Modular Patient Monitoring System
GE Healthcare CARESCAPE Canvas is a modular patient monitoring system designed to adapt to patient and department needs across the care pathway. It provides scalable monitoring and a broad overview of patient condition for different clinical departments, depending on configuration.
Key Features
- Modular scalable patient monitoring platform
- 19 inch display according to the source page
- 360-degree patient-state overview according to the source page
- Designed for use across different departments
- Unified interface intended to simplify staff workflow and equipment operation
- Configurable for different clinical scenarios and parameter requirements
Specification Highlights
- 19 inch display
- Modular monitoring system
- 360-degree patient view concept
- Department-flexible configuration
Clinical Applications
- Emergency departments
- Critical care
- Operating and recovery areas
- General wards and step-down units depending on configuration
Procurement and Configuration Notes
- Final parameter set, modules, networking, mounts, batteries and accessories may vary depending on configuration. Please confirm before ordering.
- Confirm quantity, destination, installation requirements, warranty expectations, training needs and after-sales support before purchase.
- Images and source-page specifications are indicative; final supplied accessories and configuration should be confirmed against the manufacturer or supplier quotation.
Dixion Storm DS-7 Modular Patient Monitor
The Dixion Storm DS-7 is a modular patient monitor with a large touch display, built-in module slots and core vital-sign monitoring for bedside clinical use.
Key Features
- 15 inch TFT LCD touchscreen display
- Main monitor with three built-in module slots
- Basic parameters include ECG, heart rate, respiratory rate, NIBP, SpO2, pulse and dual temperature according to the source page
- Stores graphical and numeric trends for up to 168 hours according to the source page
- Rechargeable lithium-ion battery
- Wireless LAN compatibility depending on configuration
- Bed-to-bed switching and neonatal OxyCRG support according to the source page
Specification Highlights
- 15 inch display
- 1024 x 768 screen resolution
- 3/5 ECG with 3/5/12-lead ECG analysis support
- Li-ion battery 11.1 V / 4.0 mAh as stated in the source page
Clinical Applications
- Bedside monitoring
- ICU and high-dependency units
- Operating and recovery areas
- Neonatal monitoring workflows depending on configuration
Procurement and Configuration Notes
- Final parameter set, modules, networking, mounts, batteries and accessories may vary depending on configuration. Please confirm before ordering.
- Confirm quantity, destination, installation requirements, warranty expectations, training needs and after-sales support before purchase.
- Images and source-page specifications are indicative; final supplied accessories and configuration should be confirmed against the manufacturer or supplier quotation.
Triton AMG-06 Anesthetic Gas Monitor
The Triton AMG-06 is an anaesthetic gas monitor for non-invasive monitoring of inhalational anaesthetic gases and carbon dioxide during anaesthesia. It is intended to support safer anaesthetic management by tracking gas concentration during inspiration and expiration.
Key Features
- Non-invasive monitoring of inhalational anaesthetics
- Supports isoflurane, sevoflurane, desflurane, halothane and CO2 according to the source page
- Tracks inspiratory and expiratory gas concentration
- Respiratory-rate and apnea monitoring support
- MAC coefficient measurement according to the source page
- Manual anaesthetic selection with recognition of incorrect selection according to the source page
Specification Highlights
- Monitors ISO, SEV, DES, HAL and CO2
- Inspiratory and expiratory concentration tracking
- Respiratory rate, apnea and MAC monitoring support
- Anaesthesia gas monitoring category
Clinical Applications
- Operating theatres
- Anaesthesia departments
- Recovery rooms depending on clinical protocol
- Inhalational anaesthetic monitoring
Procurement and Configuration Notes
- Final clinical use depends on anaesthesia protocol, sensors, disposables, monitor configuration and local clinical governance.
- Confirm quantity, destination, installation requirements, warranty expectations, training needs and after-sales support before purchase.
- Images and source-page specifications are indicative; final supplied accessories and configuration should be confirmed against the manufacturer or supplier quotation.
Triton MGA-06 Depth of Anesthesia Monitor
The Triton MGA-06 is a depth of anaesthesia assessment monitor designed to support anaesthesia, surgery, intensive care and procedural sedation workflows. It uses EEG-related indicators to support assessment of the patient state under anaesthesia, depending on protocol.
Key Features
- Brain activity index monitoring
- EEG signal suppression coefficient
- EEG signal quality indication
- Electromyographic component level monitoring
- Works with inhalational and intravenous anaesthetic workflows according to the source page
- Uses disposable neonatal ECG electrodes for measurement according to the source page
Specification Highlights
- Depth of anaesthesia monitoring
- EEG quality and suppression indicators
- EMG component level
- Electrode-based forehead/temporal-area measurement approach
Clinical Applications
- Anaesthesia
- Surgery
- Intensive care
- Postoperative period
- Procedural sedation
Procurement and Configuration Notes
- Final clinical use depends on anaesthesia protocol, sensors, disposables, monitor configuration and local clinical governance.
- Confirm quantity, destination, installation requirements, warranty expectations, training needs and after-sales support before purchase.
- Images and source-page specifications are indicative; final supplied accessories and configuration should be confirmed against the manufacturer or supplier quotation.
Draeger ToFscan NMT Neuromuscular Transmission Monitor
The Draeger ToFscan is a neuromuscular transmission monitor for NMT monitoring during anaesthesia. It provides a mobile independent monitoring option for assessment of neuromuscular blockade and recovery, depending on clinical protocol.
Key Features
- Lightweight mobile NMT monitoring device
- Fast measurements for neuromuscular transmission assessment
- 3D accelerometer-based technology for movement measurement in three planes
- Designed to operate without calibration according to the source page
- Rechargeable battery and mains operation
- Disposable and reusable sensor/consumable options depending on patient age and configuration
Specification Highlights
- NMT / neuromuscular transmission monitoring
- 3D accelerometer measurement approach
- Rechargeable battery
- Disposable sensor options depending on configuration
Clinical Applications
- Operating theatres
- Anaesthesia departments
- Recovery areas
- Monitoring of neuromuscular blockade and reversal
Procurement and Configuration Notes
- Final clinical use depends on anaesthesia protocol, sensors, disposables, monitor configuration and local clinical governance.
- Confirm quantity, destination, installation requirements, warranty expectations, training needs and after-sales support before purchase.
- Images and source-page specifications are indicative; final supplied accessories and configuration should be confirmed against the manufacturer or supplier quotation.
IBP Transducer Connection Cables
IBP transducer connection cables are used to connect invasive blood-pressure sensors or transducers to compatible patient monitors. They support invasive arterial pressure monitoring workflows when paired with the correct monitor and transducer system.
Key Features
- Connection cables for invasive blood pressure monitoring sensors
- Used with compatible IBP transducers and patient monitors
- Supports invasive arterial pressure measurement workflow
- Different connector options may be required depending on monitor brand and transducer type
Specification Highlights
- IBP sensor connection cable category
- Compatibility must be confirmed by monitor model, connector type and transducer system
- Accessory item for patient monitoring systems
Clinical Applications
- ICU and operating rooms
- Emergency and critical care
- Invasive blood pressure monitoring setups
- Replacement and spare accessory procurement
Procurement and Configuration Notes
- Please confirm monitor model, connector type, patient size, lead count and accessory compatibility before ordering.
- Confirm quantity, destination, installation requirements, warranty expectations, training needs and after-sales support before purchase.
- Images and source-page specifications are indicative; final supplied accessories and configuration should be confirmed against the manufacturer or supplier quotation.
Philips Invivo Expression MR400 MRI Patient Monitor
The Philips Invivo Expression MR400 is an MRI patient monitor for advanced monitoring during MRI procedures. It is intended to support informed clinical decisions in the MRI room with bedside-monitor-like parameter coverage, depending on configuration.
Key Features
- MRI-compatible monitoring platform up to 5000 Gauss as stated in the source page
- Touchscreen LCD display
- Supports SpO2, ECG, NIBP, invasive pressure, CO2 and anaesthetic-agent monitoring depending on configuration
- Alarm flagging and multi-priority alarm approach depending on setup
- Quick connection workflow for MRI monitoring accessories
Specification Highlights
- 15 inch touchscreen LCD display
- Compatibility up to 5000 Gauss
- Two invasive pressure channels depending on configuration
- Supports anaesthetic-agent and CO2 monitoring depending on configuration
Clinical Applications
- MRI departments
- Anaesthesia during MRI
- Radiology monitoring
- High-acuity MRI patient care
Procurement and Configuration Notes
- MRI-room use requires confirmation of field-strength compatibility, accessories, mounting, sensors and local safety workflow before ordering.
- Confirm quantity, destination, installation requirements, warranty expectations, training needs and after-sales support before purchase.
- Images and source-page specifications are indicative; final supplied accessories and configuration should be confirmed against the manufacturer or supplier quotation.