Cases Brackets

DefibSafe aluminium outdoor defibrillator cabinets are a unit of choice for the £1,000,000 government scheme to place Public Access Defibrillators (PADs) across the United Kingdom, with the full support of the British Heart Foundation.

• Durable and weatherproof construction giving excellent protection for the defibrillator stored safely inside.
• Stainless steel mechanical lock
• Easy single-hand entry with large flat bar handle
• Thermostatically controlled frost protection & full insulation. This ensures that the defibrillator inside is protected even in the harshest of weather conditions.
• Highly visible with clear step-by-step instructions3
• Low energy transformer for low running costs & simple installation
• Unique location code on each cabinet
• Internal LED lighting

The lock used on the cabinet comes with a lifetime warranty. It is made from the highest quality stainless steel making it durable and weatherproof. It has an in-built clutch mechanism to prevent forced entry and lock damage. A coded keypad comes as standard but an un-coded, unlocked option is available.

The large flat bar handle is easy to hold and use, This is especially useful in cold conditions or if people have limited dexterity. Crucially important to manage fire risk, the heat plate has a thermal cut-out mechanism. The plate is kept at 10 degrees and is never allowed to drop below 5 degrees. The heat plate will never reach above 25 degrees.

The cabinet is available in high visibility yellow or green as standard. Instructions on the front of the cabinet have been written with guidance from the NHS Ambulance service to give step-by-step guidance and inform passers by what to do in an emergency. Additional defibrillator signs on each side increase awareness.

The low voltage transformer that the delivers the energy required to run the cabinet is very efficient. This ensures that running costs are kept to a minimum.

It is strongly recommended to inform and involve your local Ambulance Service when placing a public access defibrillator. The unique location number of the cabinet can be shared with them so that they can add it on to their systems. In this way, in an emergency they can direct people to their nearest location and offer extra guidance during a 999 call.

The external panel is illuminated for additional visibility. The interior lighting is especially useful in rural and remote locations.

Superior Strength
The exterior is made from polyethylene which is both corrosion and impact resistant. The door is made from polycarbonate which is the same material used to construct riot shields giving additional protection from vandalism.

10 Year Warranty
We have extended the warranty of DefibSafe 2 to up to 10 years. This gives confidence in both the quality and durability of the product and peace of mind about any issues should they arise.

Increased Protection
This is the only external defibrillator cabinet on the market in the UK that has IP66 certification. This gives superior protection to protect the defibrillator inside from the harshest of weather conditions.

Pin Point Location
Each cabinet comes with a unique location code. This ensures that help in an emergency can be sent straight to the location of the cabinet and a 999 call operator can pin point the location of the defibrillator.

Technical Details

• Width 440mm
• Height 625mm
• Depth 285mm
• Weight 10kg

DefibSafe aluminium outdoor defibrillator cabinets are a unit of choice for the £1,000,000 government scheme to place Public Access Defibrillators (PADs) across the United Kingdom, with the full support of the British Heart Foundation.

• Durable and weatherproof construction giving excellent protection for the defibrillator stored safely inside.
• Stainless steel mechanical handle
• Easy single-hand entry with large flat bar handle
• Thermostatically controlled frost protection & full insulation. This ensures that the defibrillator inside is protected even in the harshest of weather conditions.
• Highly visible with clear step-by-step instructions3
• Low energy transformer for low running costs & simple installation
• Unique location code on each cabinet
• Internal LED lighting

The handle used on the cabinet comes with a lifetime warranty. It is made from the highest quality stainless steel making it durable and weatherproof. This listing is for the unlocked version. (A locked version is available SKU code 62944)

The large flat bar handle is easy to hold and use, This is especially useful in cold conditions or if people have limited dexterity. Crucially important to manage fire risk, the heat plate has a thermal cut-out mechanism. The plate is kept at 10 degrees and is never allowed to drop below 5 degrees. The heat plate will never reach above 25 degrees.

The cabinet is available in high visibility yellow or green as standard. Instructions on the front of the cabinet have been written with guidance from the NHS Ambulance service to give step-by-step guidance and inform passers by what to do in an emergency. Additional defibrillator signs on each side increase awareness.

The low voltage transformer that the delivers the energy required to run the cabinet is very efficient. This ensures that running costs are kept to a minimum.

It is strongly recommended to inform and involve your local Ambulance Service when placing a public access defibrillator. The unique location number of the cabinet can be shared with them so that they can add it on to their systems. In this way, in an emergency they can direct people to their nearest location and offer extra guidance during a 999 call.

The external panel is illuminated for additional visibility. The interior lighting is especially useful in rural and remote locations.

Superior Strength
The exterior is made from polyethylene which is both corrosion and impact resistant. The door is made from polycarbonate which is the same material used to construct riot shields giving additional protection from vandalism.

10 Year Warranty
We have extended the warranty of DefibSafe 2 to up to 10 years. This gives confidence in both the quality and durability of the product and peace of mind about any issues should they arise.

Increased Protection
This is the only external defibrillator cabinet on the market in the UK that has IP66 certification. This gives superior protection to protect the defibrillator inside from the harshest of weather conditions.

Pin Point Location
Each cabinet comes with a unique location code. This ensures that help in an emergency can be sent straight to the location of the cabinet and a 999 call operator can pin point the location of the defibrillator.

Technical Details

• Width 440mm
• Height 625mm
• Depth 285mm
• Weight 10kg

The Defib Store 4000 is the latest innovative cabinet addition to the widely acclaimed Defib Store range of cabinets , offering a durable, secure outdoor AED cabinet, suitable for all environments.

Manufactured from polycarbonate, the innovative Defib Store 4000 is the only polycarbonate AED cabinet on the market that can withstand high impact, is fire retardant to UL94 V0 and is UV stabilised against the effect of direct sun.

This polycarbonate Defib Store 4000 includes a thermostatically controlled heater, motion sensored light and marine grade stainless steel keypad lock.

• IP66 standard, sealed against high pressure water hoses and dust
• Suitable for coastal locations
• Fully corrosion resistant in UV stabilised high impact polycarbonate - the same material used in Police riot shields. The UV resistance protects against the harmful effects of the sun.
• Marine grade stainless steel keypad lock, salt spray tested
• Land Rover drive over tested
• Internal LED motion sensing light which can be removed and used as a torch during deployment
• Thermostatically controlled heater ensures the defibrillator is kept in optimum conditions
• Internal hook accommodates any defibrillator without carry case
• Large viewing window allows easy checking on the status of the AED defibrillator
• Internal hinges that do not allow for external tampering
• Double skin clamshell design provides additional insulation in cold weathers
• Comes complete with comprehensive installation instructions and a fixing kit
• Cabinet dimensions 465x435x240mm
• Manufactured in the UK
• 10 year warranty (5 year warranty on heater and keypad lock)

Designed for everyday heroes in extraordinary moments. When every second counts, the Philips HeartStart HS1 Defibrillator is ready for action. 

The Philips HS1 allows anyone, even with minimal or no training, to treat the most common cause of suspected sudden cardiac arrest (SCA) by delivering a swift and effective shock wherever SCA occurs.

The HS1 automated external defibrillator provides real-time guidance through step-by-step voice prompts, from pad placement to performing CPR. When every second counts, Philips HeartStart HS1 defibrillator is your reliable partner, guiding you step by step.

Provides voice prompts for every step, from pad placement to performing CPR, including the frequency and depth of chest compressions and breaths. Can be converted to a trainer with the installation of SMART Training Pads Cartridge (not included).

Why Choose the Philips HeartStart HS1 Defibrillator?

It's fast to learn..

So simple to operate that a first aider with minimal training can potentially save the life of a co-worker, friend or member of the family or public.

Easy to use...

Calming natural voice provides voice prompts for every step of the way from pad placement to performing CPR.

Always ready...

The Philips HS1 conducts a series of automatic self-tests daily, weekly, and monthly, including pad testing. Ensuring the HS1 is always ready when it's urgently needed.

Includes:

• HS1 AED Defibrillator
• 1 pre-installed battery
• 1 pre-installed Adult SMART Pads Cartridge
• Quick Set-up Guide
• Supplied with a Carry case
• Maintenance Guide
• Quick Reference Guide
• Owner’s Manual
• Date Sticker

Warranty info:

• 8-year AED warranty
• 4-year battery warranty
• Pads warranted until the expiration date
• Other accessories include a 1-year warranty.

Dimensions: 7 x 19 x 21cm(D/H/W) 1.5kg with battery and pads.

Please note: This product includes a carry case.

The AED Defib Wall Bracket is ideal for increasing the visibility of the AED and make it easily accessible in case of an emergency when seconds can save a life. The Aed Defib Wall Bracket is suitable for using with the following AEDs units:

• Telefunken FA1 with case
• Powerheart G5 
• HeartStart HS1 with or without case 
• Zoll AED Plus without case 
• LIFEPAK CR Plus without case 
• Powerheart G3 without case
• 43cmx 21cmx 39cm

This alarmed cabinet uses 3x LR44/A76 batteries.

Heated Outdoor Defibrillator/AED Cabinet. Alarmed and Lockable with Digital Key Code Pad. Wall Mountable.

This wall mountable Defibrillator/AED cabinet provides security, practicality, high visibility and IP56 rated outdoor weather resistance. The cabinet is alarmed and heated, thus giving peace of mind in the event of an emergency, that the defibrillator located within is in optimal condition.

The cabinet is manufactured from thick carbon steel with the addition of a shatterproof, transparent window - this allows for a quick health check status of the defibrillator within. Finished in striking yellow for high visibility with added features of a waterproof seal and user regulated temperature settings.

Cabinet also includes Defibrillator/AED instruction icons on the front door to help guide users on the correct procedure.

Mechanical keypad

The mechanical keypad has a permanent blue LED light which allows the user to access their AED with their chosen numeric combination.

Digital temperature display

The digital temperature display has an illuminated LCD screen displaying the internal temperature. The user can view the display, set the temperature and be certain that the defibrillator is being stored at the correct temperature.

Integrated alarm

Once activated, the integrated alarm will sound when the cabinet is opened.

The Defibrillator/AED cabinet comes with a manufacturers 12 month warranty.

Key facts

• Compatible with all Defibrillators/AED’s
• Multiple Security Options
• AED Signage
• Thermostat Controlled
• Wall mountable.
• Security options
• Mechanical, lit keypad
• Digital temperature display
• Integrated alarm
• Internal LED light

Components

• Mechanical keypad
• Alarm (120DB)
• Heating system
• Thermostat
• Magnetic LED light
• 9V blue LED light
• 9V transformer

Technical details

• Weight: 11.5kg
• Size: 500mm x 400mm x 220mm
• Internal size: 370mm x 380mm x 170mm
• Material: 1.5mm Steel
• IP56 Waterproof rating
• Option to hard wire

Power supply

• Weight: 11.5kg
• Size: 500mm x 400mm x 220mm
• Internal size: 370mm x 380mm x 170mm
• Material: 1.5mm Steel
• IP56 Waterproof rating
• Option to hard wire

Please note: Defibrillator/AED not included.

The Defib Store 4000 is the latest innovative cabinet addition to the widely acclaimed Defib Store range of cabinets , offering a durable, secure outdoor AED cabinet, suitable for all environments.

Manufactured from polycarbonate, the innovative Defib Store 4000 is the only polycarbonate AED cabinet on the market that can withstand high impact, is fire retardant to UL94 V0 and is UV stabilised against the effect of direct sun.

This Green polycarbonate Defib Store 4000 includes a thermostatically controlled heater, motion sensored light and plastic wing handle.

• IP66 standard, sealed against high pressure water hoses and dust
• Suitable for coastal locations
• Fully corrosion resistant in UV stabilised high impact polycarbonate - the same material used in Police riot shields. The UV resistance protects against the harmful effects of the sun.
• Plastic wing handle for free opening
• Optional alarm (additional charges apply)
• Land Rover drive over tested
• Internal LED motion sensing light which can be removed and used as a torch during deployment
• Thermostatically controlled heater ensures the defibrillator is kept in optimum conditions
• Internal hook accommodates any defibrillator without carry case
• Large viewing window allows easy checking on the status of the AED defibrillator
• Internal hinges that do not allow for external tampering
• Double skin clamshell design provides additional insulation in cold weathers
• Comes complete with comprehensive installation instructions and a fixing kit
• Cabinet dimensions 465x435x240mm
• Manufactured in the UK 10 year warranty (5 year warranty on heater)

In a lifesaving event, having quick access to the right tools is paramount. The AED Wall Mount Bracket is designed specifically for placing the Philips defibrillator and its accessories within reach at all times. The defibrillator’s carry case can be tethered to the Wall Mount Bracket with a breakaway Secure-Pull Seal (M38A) to discourage tampering. A broken seal indicates that the defibrillator has been removed from the Wall Mount and accessories may need to be replenished. The Fast Response Kit (68-PCHAT) tucks neatly behind the Defibrillator Case.