ETI

Digital Refrigeration Thermometer supplied with a UKAS Certificate of Calibration

• Monitors both internal & external temperatures
• Calibrated to UKAS standards
• Clearly visible LCD display
• Perfect for commercial use

Digital refrigeration thermometer featuring a max/min function, audible alarm. This ETI refrigerator thermometer is supplied with a two-point UKAS Certificate of Calibration (applies to remote probe only). Each certificate indicates deviations from standards at various check points: -18 and 0 °C.

This refrigeration thermometer features a large LCD display and incorporates two temperature sensors; a remote water resistant probe with one metre PVC lead for the appliance temperature and an internal sensor for the room temperature. The remote probe can be mounted onto the internal wall of the fridge using the suction pad or mounting bracket supplied.

The thermometer is housed in a durable ABS case and incorporates a foot-stand for shelf mountingand is perfect for use in commercial refrigeration applications where accuracy requirements are essential.

Data:

• Range: -49.9 to 69.9°C
• Resolution: 0.1 °C/°F
• Accuracy: ±1°C
• Battery: 1.5 volt AAA
• Battery life: 5000 hours
• Display: custom LCD
• Dimensions: 15 x 52 x 73mm
• Case material: ABS plastic
• Guarantee: one year
• Measurement scale: Celsius
• Certification: UKAS calibration certificate

Each Legionella thermometer kit contains:

• 1 x 221-041 Therma 1 thermometer
• 1 x 123-160 penetration probe
• 1 x 123-030 precision ribbon sufrace probe
• 1 x 133-362 PTFE wire probe
• 1 x 806-150 countdown timer
• 1 x 836-032 One tub UniWipes (40)
• 1 x 834-150 ABS carrying case 

Incorrect water temperature is a key risk factor for legionella growth. The legionella bacteria multiply in water at temperatures between 20 to 45°C, particularly if a supply of nutrients is present, such as scale, rust, sludge or algae. A typical method of control is to store cold water below 20°C. Hot water should be stored above 60°C and distributed at above 50°C.

This thermometer kit can be used to monitor the temperature of both standing water and the surface of pipes and tanks that form part of the water system.

The immersion probe should be placed in the water to a minimum depth of 25mm; the ribbon surface probe may be used to take the temperature of pipes and tanks, and the wire probe can be used to reach awkward places or where the other probes are not appropriate. This kit comes with a traceable certificate of calibration.

Current legislation means that if you are the employer or person in control of premises, you must organise a risk assessment. The revised Approved Code of Practice (ACOP) issued by the Government's Health and Safety Executive (HSE) significantly extends the scope of its guidance on control of legionella bacteria in water.

The code now applies to all hot and cold water systems in the workplace regardless of their capacity, i.e. the lower limit of 300 litres previously used to exclude domestic systems no longer applies. Whilst domestic systems may represent a risk, the code only applies to risk arising from a work activity.

This means that all employers who manage premises with hot/cold water systems and/or a wet cooling system have a legal responsibility to identify any risk of contamination and to prevent or control it.

The ThermaGuard Pharm has been specifically designed for use in monitoring the storage and transportation temperatures of perishable items such as vaccines, medicines and food. This thermometer features a large LCD display, which simultaneously displays the current and max/min recorded temperatures.

Units feature programmable audible alarms allowing the user to preset high and low temperature limits. When the alarm is active the LCD will flash. The alarm can be silenced by pressing any button.

Housed in a splash-proof IP54 ABS case, which includes the 'Biomaster' additive that reduces bacterial growth, ThermaGuard Pharm models feature a CalCheck 0.0 °C (±0.1 °C) function that allows the user to verify the accuracy of the thermometer at any time, giving confidence that measurements are accurate.

Thermistor probes are encased in a sealed bottle. To begin monitoring, simply unscrew and top up with Glycol solution (50 ml bottle supplied).

The ThermaGuard Pharm 101 incorporates two temperature sensors; a remote water resistant thermistor probe with a two metre PVC lead for monitoring the product temperature and an internal sensor to monitor room temperature.

A two-point UKAS Certificate of Calibration is included. Each certificate indicates deviations from standards at -18 and 0 °C.

CalCheck function:

ThermaGuard features a CalCheck 0.0 °C (±0.1 °C) function that allows the user to verify the accuracy of the thermometer at any time, giving confidence that measurements are accurate.

Free wall bracket:

ThermaGuard Pharm is supplied with a plastic wall bracket that incorporates a built-in foot stand, hook for hanging and screw thread for tripod mounting, allowing users to store or position the unit safely, securely and protect against accidental damage.

The ThermaGuard Pharm has been specifically designed for use in monitoring the storage and transportation temperatures of perishable items such as vaccines, medicines and food. This thermometer features a large LCD display, which simultaneously displays the current and max/min recorded temperatures.

Units feature programmable audible alarms allowing the user to preset high and low temperature limits. When the alarm is active the LCD will flash. The alarm can be silenced by pressing any button.

Housed in a splash-proof IP54 ABS case, which includes the 'Biomaster' additive that reduces bacterial growth, ThermaGuard Pharm models feature a CalCheck 0.0 °C (±0.1 °C) function that allows the user to verify the accuracy of the thermometer at any time, giving confidence that measurements are accurate.

Thermistor probes are encased in a sealed bottle. To begin monitoring, simply unscrew and top up with Glycol solution (50 ml bottle supplied).

The ThermaGuard 102 incorporates two remote water resistant thermistor probes, both with two metre PVC leads for monitoring dual applications. An optional two-point UKAS Certificate of Calibration is available. Each certificate indicates deviations from standards at -18 and 0 °C.

A two-point UKAS Certificate of Calibration is included. Each certificate indicates deviations from standards at -18 and 0 °C.

CalCheck function:

ThermaGuard features a CalCheck 0.0 °C (±0.1 °C) function that allows the user to verify the accuracy of the thermometer at any time, giving confidence that measurements are accurate.

Free wall bracket:

ThermaGuard Pharm is supplied with a plastic wall bracket that incorporates a built-in foot stand, hook for hanging and screw thread for tripod mounting, allowing users to store or position the unit safely, securely and protect against accidental damage.