Medela
Medela Battery for Clario Secretion Aspirator
The Medela battery for the Clario secretion aspirator is a replacement lithium-ion battery designed for use with the Medela Clario suction system. It supports portable operation of the aspirator, allowing the device to be used away from mains power when required.
With an operating time of up to 50 minutes at maximum load and a charging time of approximately 5 hours, this battery is suitable for maintaining mobility and flexibility during suction therapy and secretion aspiration workflows.
Key Features
• Replacement battery for Medela Clario secretion aspirator
• Lithium-ion battery type
• Operating time up to 50 minutes at maximum load
• Charging time approximately 5 hours
• Supports portable use of the Clario aspirator
• Suitable for replacement, backup or maintenance requirements
• Genuine Medela product information provided
Product Overview
| Product | Details |
|---|---|
| Product Name | Battery for Clario Secretion Aspirator |
| Brand | Medela |
| Compatible Device | Medela Clario secretion aspirator |
| Battery Type | Li-ion battery |
| Operating Time | Up to 50 minutes at maximum load |
| Charging Time | Approximately 5 hours |
| Product ID | 50-141142040001 |
| Item Number | 14114204 |
| EAN | 859234624130 |
Usage and Safety Information
Before replacing the battery, the Clario aspirator must be switched off and disconnected from the mains power supply.
The battery must be calibrated before first use and again after prolonged storage of more than 2 months. Please refer to the operating instructions for the correct calibration procedure.
Important Handling Notes
| Instruction | Details |
|---|---|
| Before Battery Replacement | Switch off the Clario aspirator |
| Power Disconnection | Disconnect the plug from the power supply before replacing the battery |
| First Use | Battery calibration is required before first deployment |
| After Storage | Recalibrate after storage longer than 2 months |
| Operating Instructions | Follow the Medela Clario operating manual for calibration and replacement guidance |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Why Choose This Battery?
This replacement battery helps keep the Medela Clario secretion aspirator ready for portable use. It is suitable as a replacement for an ageing battery or as a backup battery for facilities that require reliable suction equipment availability.
Suitable For
• Medela Clario secretion aspirators
• Medical suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Equipment maintenance departments
• Replacement and backup battery requirements
Ordering Information
Please confirm compatibility with your specific Medela Clario model before ordering.
Important: Battery operating time may vary depending on device condition, suction load, battery age and usage conditions. Always follow the official Medela operating instructions for charging, calibration, replacement and storage.
Medela Container Set with Lid for Clario Secretion Aspirator
The Medela container set with lid is a replacement collection container designed for use with the Medela Clario secretion aspirator. It provides a practical container solution for secretion collection during suction therapy and is suitable for replacement, maintenance or spare-part requirements.
The container can be cleaned in the dishwasher, with boiling water or with disinfectant, according to the user manual and local hygiene procedures. This container is not autoclavable.
Key Features
• Replacement container set for Medela Clario secretion aspirator
• Supplied with lid
• Suitable for secretion collection during suction use
• Can be cleaned in the dishwasher
• Can be cleaned with boiling water
• Can be cleaned with disinfectant
• Not autoclavable
• Suitable for replacement or spare-part use
• Genuine Medela product information provided
Product Overview
| Product | Details |
|---|---|
| Product Name | Container Set with Lid for Clario Secretion Aspirator |
| Brand | Medela |
| Compatible Device | Medela Clario secretion aspirator |
| Product Type | Collection container set |
| Lid Included | Yes |
| Autoclavable | No |
| Product ID | 50-141142020001 |
| Item Number | 14114202 |
| EAN | 07612367009379 |
Cleaning Information
| Cleaning Method | Suitable |
|---|---|
| Dishwasher Cleaning | Yes |
| Boiling Water | Yes |
| Disinfectant | Yes |
| Autoclaving | No |
Use and Hygiene Information
The container should be cleaned according to the Medela Clario operating instructions and local infection-control procedures.
This container is not autoclavable and should not be sterilised in an autoclave. For full cleaning and handling instructions, refer to the official user manual.
Important Handling Notes
| Instruction | Details |
|---|---|
| Compatibility | Confirm suitability with the specific Medela Clario model before ordering |
| Cleaning | Clean using approved methods listed in the user manual |
| Autoclaving | Do not autoclave this container |
| Hygiene Procedure | Follow local infection-control procedures |
| Replacement | Replace when required according to hygiene and device-use requirements |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Suitable For
• Medela Clario secretion aspirators
• Suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement and spare container requirements
Ordering Information
Please confirm compatibility with your specific Medela Clario secretion aspirator before ordering.
Important: This container is not autoclavable. Cleaning and replacement should be carried out according to the Medela Clario user manual and local hygiene procedures.
Medela Clario Battery Version Secretion Aspirator
The Medela Clario Battery Version is a compact and lightweight secretion aspirator designed for portable suction support in clinical, care and homecare environments. Weighing only 2 kg, it is easy to carry, position and use where mobile suction is required.
This battery-operated version includes an integrated lithium-ion battery, allowing the device to be used away from mains power when required. The Clario features a simple vacuum control system with three selectable suction levels: minimum, medium and maximum.
The device also includes a hygiene concept with float and collection chamber, designed to help prevent secretion overflow and reduce the risk of contamination inside the device.
Key Features
• Battery-operated secretion aspirator
• Compact and lightweight design — only 2 kg
• Integrated lithium-ion battery
• Maximum suction flow of 15 L/min
• Three vacuum settings: minimum, medium and maximum
• Vacuum range up to 550 mmHg
• Simple suction selection using control dial
• Hygiene concept with float and collection chamber
• Helps prevent secretion overflow
• Helps protect the inside of the device from contamination
• Suitable for mobile, clinical, care and homecare suction workflows
• Genuine Medela product information provided
Product Overview
| Product | Details |
|---|---|
| Product Name | Medela Clario Battery Version Secretion Aspirator |
| Brand | Medela |
| Product Type | Battery-operated secretion aspirator / suction device |
| Main Use | Secretion aspiration |
| Weight | 2.00 kg |
| Battery | Yes |
| Battery Type | Lithium-ion battery |
| Maximum Suction Flow | 15 L/min |
| Vacuum Settings | Minimum, medium and maximum |
| Minimum Vacuum Setting | 125 mmHg |
| Medium Vacuum Setting | 250 mmHg |
| Maximum Vacuum Setting | 550 mmHg |
| Hygiene System | Float and collection chamber |
| Product ID | 50-141142010001 |
| Item Number | 14114201 |
| EAN | 07612367009522 |
Vacuum Settings
| Setting | Vacuum Level |
|---|---|
| Minimum | 125 mmHg |
| Medium | 250 mmHg |
| Maximum | 550 mmHg |
Function and Use
| Function | Description |
|---|---|
| Secretion Aspiration | Supports removal of secretions using suction |
| Battery Operation | Allows portable use away from mains power |
| Vacuum Selection | Three selectable suction settings for simple operation |
| Overflow Protection | Float and collection chamber help prevent secretion overflow |
| Device Protection | Hygiene design helps reduce risk of internal contamination |
| Portable Use | Lightweight 2 kg design supports easy handling and movement |
Design and Workflow Benefits
The Medela Clario Battery Version is designed for straightforward suction use in different care environments. Its compact size, integrated battery and simple control dial make it practical for mobile suction support.
The hygiene system helps protect the device by reducing the risk of overflow, while the three vacuum settings allow the user to select the suction level required for the care situation.
| Feature | Benefit |
|---|---|
| Integrated Battery | Supports mobile suction use |
| Lightweight 2 kg Design | Easier to carry, move and position |
| Simple Control Dial | Allows quick suction level selection |
| Three Vacuum Settings | Supports controlled suction according to need |
| Float and Collection Chamber | Helps prevent secretion overflow |
| Compact Format | Suitable for clinical, care and homecare use |
| 15 L/min Suction Flow | Provides practical suction performance |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Suitable For
• Hospitals
• Clinics
• Community care settings
• Homecare suction support where appropriate
• Mobile secretion aspiration workflows
• Medical suction support
• Equipment replacement and backup stock
Ordering Information
Please confirm the required container set, safety chamber, suction hose, battery accessories, charger and power supply package before ordering.
Important: Use, cleaning, battery charging, maintenance and replacement of accessories should follow the Medela Clario operating instructions and local infection-control procedures. Battery runtime may vary depending on suction load, battery age and usage conditions.
Medela Clario Secretion Aspirator is supplied by Nass Ventures for clinical suction, secretion management, airway care and respiratory equipment procurement.
This listing has been checked against the individual OxyCare product page and uses the product-specific image URL, not a repeated placeholder image.
Key Features
- Light secretion aspirator weighing approximately 2 kg
- Suction capacity: 15 l/min
- Hygiene concept with float and collection chamber
- Vacuum settings: minimum 125 mmHg, medium 250 mmHg, maximum 550 mmHg
- Designed for secretion aspiration workflows
Product Details
- Brand / vendor: Medela
- Supplier item number: 14114200
- Source product page: https://www.oxycare.eu/en/ventilation-suction/suction/clario-secretion-aspirator/
- Supplier price was listed in EUR and Nass Ventures 35% markup has been applied.
Ordering Information
Please contact Nass Ventures to confirm current availability, final quotation, delivery options, compatible accessories and technical requirements before ordering.
Medela Safety Chamber for Clario Secretion Aspirator
The Medela Safety Chamber for the Clario secretion aspirator is a replacement protection chamber designed to help protect the suction device from overflow, secretion ingress and possible internal damage.
The safety chamber acts as a ballast/protection chamber between the collection system and the device. It helps reduce the risk of fluid entering the aspirator if secretion overflow occurs during use.
For hygiene reasons, the safety chamber should be replaced when required, including during patient changeover according to local infection-control procedures and the device operating instructions.
Key Features
• Replacement safety chamber for Medela Clario secretion aspirator
• Helps protect the aspirator from overflowing secretion
• Reduces risk of device damage caused by secretion ingress
• Acts as a ballast/protection chamber
• Suitable for hygiene replacement during patient changeover
• Genuine Medela product information provided
• Suitable for maintenance, replacement and infection-control workflows
Product Overview
| Product | Details |
|---|---|
| Product Name | Safety Chamber for Clario Secretion Aspirator |
| Brand | Medela |
| Compatible Device | Medela Clario secretion aspirator |
| Product Type | Safety chamber / protection chamber |
| Main Use | Helps protect the aspirator from secretion overflow |
| Product ID | 50-141142030001 |
| Item Number | 14114203 |
| EAN | 859234623753 |
Function
| Function | Description |
|---|---|
| Overflow Protection | Helps protect the device from overflowing secretion |
| Device Protection | Helps reduce the risk of internal damage to the aspirator |
| Ballast Chamber | Works as a protective chamber within the suction system |
| Hygiene Replacement | Should be exchanged when required, including patient changeover where applicable |
Usage and Hygiene Information
The safety chamber should be checked and replaced according to the Medela Clario operating instructions and local hygiene protocols.
For hygienic reasons, the safety chamber may need to be exchanged during patient changeover or when contamination is suspected.
Important Handling Notes
| Instruction | Details |
|---|---|
| Patient Changeover | Replace the safety chamber where required for hygiene |
| Contamination Risk | Replace if contamination or overflow is suspected |
| Device Protection | Use the correct safety chamber to help protect the aspirator |
| Operating Instructions | Follow the Medela Clario operating manual for correct replacement guidance |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Why Choose This Safety Chamber?
This replacement safety chamber helps maintain the protection and hygiene of the Medela Clario secretion aspirator. It is suitable for hospitals, clinics, care settings and equipment maintenance teams that require correct replacement parts for safe suction device operation.
Suitable For
• Medela Clario secretion aspirators
• Suction and secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Equipment maintenance departments
• Infection-control replacement requirements
• Patient changeover hygiene procedures
Ordering Information
Please confirm compatibility with your specific Medela Clario model before ordering.
Important: The safety chamber should be replaced according to the device operating instructions, patient-use requirements and local infection-control procedures.
Medela Silicone Suction Hose for Clario Suction Device — 150 cm
The Medela Silicone Suction Hose for the Clario suction device is a replacement suction hose designed for compatible Medela Clario suction systems. With a length of 150 cm, it provides a flexible connection for secretion aspiration workflows.
The soft silicone material makes the hose comfortable and easy to handle during use. Its flexible design supports smooth movement and agile suction handling, helping users position the hose effectively during aspiration.
Key Features
• Replacement silicone suction hose for Medela Clario suction device
• 150 cm hose length
• Made from soft silicone material
• Flexible and easy to handle
• Supports agile suction positioning
• Suitable for secretion aspiration workflows
• Suitable as a replacement or spare suction hose
• Genuine Medela product information provided
Product Overview
| Product | Details |
|---|---|
| Product Name | Medela Silicone Suction Hose for Clario Suction Device |
| Brand | Medela |
| Compatible Device | Medela Clario suction device |
| Product Type | Silicone suction hose |
| Length | 150 cm |
| Product ID | 50-141142100001 |
| Item Number | 057-AS150025TF |
| EAN | 8592346238916 |
Use Information
| Use Area | Details |
|---|---|
| Secretion Aspiration | Supports suction workflows with the Clario suction device |
| Flexible Handling | Soft silicone construction supports easier handling |
| Replacement Use | Suitable as a replacement or spare hose |
| Clinical / Care Use | Suitable for compatible Clario suction applications |
Handling Benefits
| Feature | Benefit |
|---|---|
| Silicone Material | Soft and flexible during use |
| 150 cm Length | Provides practical working reach |
| Flexible Hose Design | Supports easier movement and positioning |
| Comfortable Handling | Helps make suction use more manageable |
| Replacement Part | Useful for maintenance and spare stock |
Important Handling Notes
| Instruction | Details |
|---|---|
| Compatibility | Confirm suitability with your specific Medela Clario suction device before ordering |
| Use | Use only with compatible suction equipment |
| Replacement | Replace if damaged, worn, contaminated or unsuitable for continued use |
| Cleaning / Hygiene | Follow the Medela operating instructions and local hygiene procedures |
| User Manual | Refer to the Clario user manual for correct use and maintenance |
Manufacturer Information
| Manufacturer | Details |
|---|---|
| Manufacturer | Medela AG |
| Address | Lättichstrasse 4b, 6340 Baar, Switzerland |
| customercare@medela.ch | |
| Telephone | +41 41 562 51 51 |
EU Representative
| EU Representative | Details |
|---|---|
| Company | Medela GmbH |
| Address | Georg-Kollmannsberger-Straße 2, 85386 Eching, Germany |
| info@medela.de | |
| Telephone | +49 89 3197590 |
Suitable For
• Medela Clario suction devices
• Secretion aspiration workflows
• Hospitals
• Clinics
• Community care settings
• Homecare equipment users
• Biomedical and equipment maintenance departments
• Replacement suction hose requirements
Ordering Information
Please confirm compatibility with your specific Medela Clario suction device before ordering.
Important: Use, cleaning, replacement and disposal should follow the Medela Clario operating instructions and local infection-control procedures.