dixion
Overview
The DIXION BabyGuard I-1103 is an infant incubator for neonatal intensive care. It provides air-temperature and skin-temperature servo control by micro-computer and uses an internal air-circulation system designed to minimise airflow inside the hood environment. The automatic curtain helps reduce heat loss, while the double-walled hood helps conserve heat.
Applications
• Neonatal intensive care
• Infant warming and incubation
• Hospital neonatology departments
• Paediatric and maternity clinical settings
Key Features
• Air mode and Baby mode controlled by micro-computer
• Passive air humidification in the chamber
• Double-walled hood
• Basic stand on wheels with brakes
• Optional weighing scales
• Three drawers
• Side chamber windows with transparent flexible sleeves
• Front access window with iris diaphragm
• Smooth bassinet adjustment
• Film touchpad control
• LED indicators for real skin temperature, real air temperature, set air temperature and heating status
• 7-alarm system
• RS-232 interface for distance control
Technical Specifications
Temperature servo-control: Included
Air temperature control range: 25–37°C, override mode 37–39°C
Skin temperature control range: 34–37°C, override mode 37–38°C
Temperature rise time: 30 minutes
Bassinet inclination: ±12°
Airflow rate within hood environment: <0.3 m/sec
Noise level inside hood: ≤45 dB
Alarms: Power failure, airflow failure, air temperature sensor failure, skin temperature sensor failure, temperature sensor deviation, high temperature sensor failure and over-temperature alarm
Power supply: 220–230 V, 50–60 Hz
Main body dimensions: 1085 × 640 × 910 mm
Cabinet dimensions: 1125 × 665 × 725 mm
Gross weight: 63 kg main body; 68 kg cabinet
Ordering Information
• Please confirm the required model, quantity, delivery location and clinical department before ordering.
• Confirm accessories, cabinet/stand requirements, optional weighing scale, installation requirements and local regulatory requirements before purchase.
• For hospital projects, Nass Ventures can support sourcing, procurement and equipment planning depending on the final configuration.
Overview
Infant incubator BabyGuard I-1107 for intensive care is air-temp, skin-temp, air humidity and oxygen concentration (optional) servo-controlled by a micro-computer and equipped with a special air circulation system inside the apparatus which minimizes the flow in the hood environment. The automatic curtain reduces the heat loss. The double-walled hood conserves the heat for 2 hours.
Applications
• Neonatology departments
• NICU and newborn intensive care areas
• Maternity and paediatric clinical settings
Key Features
• Air temperature and skin temperature servo-control
• Air humidity servo-control
• Oxygen concentration display system
• Double-walled hood
• Basic stand on wheels and with brakes
• Weigh scales (optional)
• 3 drawers
• Side windows of the chamber are equipped with transparent leaves and flexible sleeves.
• Front access window with iris diaphragm
• Smooth couch adjustment
• Film control keyboard
• LED indicators reflect real temperature of skin and air, set temperature of air, heating
• 9-alarm option
• RS-232 interface for distance control
Technical Specifications
Air temperature control range: 25 – 37 °C (temperature override mode to 37 – 39 °C)
Skin temperature control range: 34 – 37 °C (temperature override mode to 37 – 38 °C)
Temperature rise time: 30 min
Humidity control range: 0 – 90 %
Indicator range of oxygen concentration: 0 – 99 %
Inclination of the bassinet: ± 12°
Airflow rate within hood environment: < 0,3 m/s
Noise level (inside the hood): ≤ 45 dB
Alarms: Power failure Airflow failure Air temperature sensor failure Skin temperature sensor failure Temperature sensor deviation High temperature sensor failure High or low skin temperature High or low humidity level High or low oxygen concentration level
Power supply: 220 – 230 V, 50 – 60 Hz
Dimension: 1085mm×640mm×915mm (Main body) 1125mm×665mm×730mm (Cabinet)
Gross weight: 68kg 60kg (Cabinet)
Ordering Information
• Please confirm the required model, quantity, delivery location and clinical department before ordering.
• Confirm accessories, optional configurations, installation requirements and local regulatory requirements before purchase.
• For hospital projects, Nass Ventures can support sourcing, procurement and equipment planning depending on the final configuration.
Overview
Infant incubator BabyGuard 1-1120 for intensive care is air-temp, skin-temp, air humidity and oxygen concentration servo-controlled by a micro-computer. Its graphic display represents all trends, which allows the doctor to make ‘at-a-glance’ assessment of the environment inside the incubator. The infant incubator is equipped with a special air circulation system inside the apparatus which minimizes the flow in the hood environment. The automatic curtain reduces the heat loss. The double-walled hood conserves the heat for 2 hours.
Applications
• Neonatology departments
• NICU and newborn intensive care areas
• Maternity and paediatric clinical settings
Key Features
• Air temperature and skin temperature servo-control
• Air humidity servo-control
• Oxygen concentration servo-control (optional)
• Double-walled hood
• Basic stand on wheels and with brakes
• Built-in weigh scales (optional)
• 3 drawers for belongings and shelves for additional equipment
• IV stand
• Side windows of the chamber are equipped with transparent leaves and flexible sleeves.
• Front access window with iris diaphragm
• Smooth bassinet adjustment
• X-ray film cassette
• Electronic control
• Film control keyboard
• Large LCD display reflects real skin and air temperature, set air temperature, heating, graphic trends (up to 48 hours)
• 9-alarm option
• RS-232 interface for distance control
• Vertical height adjustment stand
Technical Specifications
Air temperature control range: 25 – 37 °C (temperature override mode to 37 – 39 °C)
Skin temperature control range: 34 – 37 °C (temperature override mode to 37 – 38 °C)
Temperature rise time: 40 min
Humidity control range: 0 – 90 %
Water container capacity: 1.2 l
1 container hour of service: up to 12 hours
Oxygen concentration measuring range: 0 – 99 %
Oxygen concentration control range: 20 – 60 %
Inclination of the bassinet: ± 8°
Air movement rate (inside the hood): < 0.2 m/s
Noise level (inside the hood): ≤ 45 dB
Alarms: Power failure Airflow failure Air temperature sensor failure Skin temperature sensor failure Temperature sensor deviation High temperature sensor failure High or low skin temperature High or low humidity level High or low oxygen concentration level
Power supply: 220 – 230 V, 50 – 60 Hz
Dimension: 1110mm×710mm×888mm (Main body) 1029mm×697mm×826mm (Cabinet)
Gross Weight: 70kg (Main Body) 80kg (Cabinet)
Ordering Information
• Please confirm the required model, quantity, delivery location and clinical department before ordering.
• Confirm accessories, optional configurations, installation requirements and local regulatory requirements before purchase.
• For hospital projects, Nass Ventures can support sourcing, procurement and equipment planning depending on the final configuration.
Overview
The DIXION BabyGuard I-1120 Transformer combines closed infant incubator mode, open radiant warmer mode and neonatal monitoring functions for hospital neonatal care.
Applications
• Neonatology departments
• NICU and newborn intensive care areas
• Maternity and paediatric clinical settings
• Radiant warmer / open-care use
• Neonatal monitoring workflows depending on configuration
Technical Specifications
Mode of control: Air mode and Baby mode controlled by micro-computer
Air temperature control range: 20°C-37°C(override mode 37°C-39°C)
Baby temperature control range: 34°C-37°C(override mode 37°C-38°C)
Accuracy of skin temperature sensor: within ± 0.2°C
The temperature fluctuation between incubator temperature and average incubator temperature (under stable temperature condition): ≤0.5°C
Temperature uniformity: ≤0.8°C(mattress is on the horizontal position) ≤1.0°C(mattress is on the maximum tilt position)
Inclination of the bassinet: ± 12° (stepless adjustable)
Noise inside hood (stable working condition): ≤50dB(A)
Relative Humidity Level: Humidity display range Humidity control range Accuracy of humidity display Accuracy of humidity control: 0%RH~100%RH 0%RH~90%RH ± 5%RH ± 5%R
Oxygen Level: Indication range of oxygen concentration Control range of oxygen concentration Indication accuracy of oxygen concentration Control accuracy of oxygen concentration: 0%~100% 20%~60% ± 2% (The set value is below 25%) ± 3% (The set value is above 25%) ±4% 02
Control Mode: Pre-warm mode, manual mode and baby mode are controlled by micro-computer
Baby mode temperature control range: 34°C-38°C
Control accuracy ( The fluctuation range between Skin temperature and Set temperature): ≤0.5°C
Temperature uniformity of mattress: ≤2°C
SPO2 Display range: 1- 100%
SPO2 Display resolution: 1%
SPO2 Alarm setting range: Upper limit:50 ~100% Lower limit: 45-95%
PR Display range: 25-240 bpm
PR Display resolution: 1bpm
PR Alarm Setting range: Upper limit: 80 – 240 bpm Lower limit: 35-180 bpm
PI Display range: 0.02-20.0%
PI Display Resolution: 0.01%
Ordering Information
• Please confirm the required model, quantity, delivery location and clinical department before ordering.
• Confirm accessories, optional configurations, installation requirements and local regulatory requirements before purchase.
• For hospital projects, Nass Ventures can support sourcing, procurement and equipment planning depending on the final configuration.
Overview
The DIXION BabyGuard I-1120-2 Transformer is a three-in-one neonatal care system integrating incubation, first aid and monitoring functions for NICU use.
Product Notes
Fast switching and seamless care
Fast switching between infant incubator and radiant warmer modes by one click, providing a closed incubation environment for newborns, while also can be transformed into an open emergency space.
Applications
• Neonatology departments
• NICU and newborn intensive care areas
• Maternity and paediatric clinical settings
• Radiant warmer / open-care use
• Neonatal monitoring workflows depending on configuration
Technical Specifications
Control: 10.4 inch TFT color LCD touch screen
Electric tilting system: +
Temperature servo control: air mode, baby mode, kangaroo mode
Bassinet angle display function: +
Humidity control: +
Panel damping system: opt
Oxygen concentration control: +
Weighing system: opt
Skin temperature sensor: +
Video recording: opt
>37°C: +
Observation lamp: opt
Vertical height adjustment stand: +
Ambient temperature and humidity monitoring: opt
Hands-free alarm silence: +
Temperature overshoot in air control mode: No greater than 1.0 °
Temperature servo control mode: Pre-warm mode, Manual mode, Baby mode
Warmer module: +
APGAR, CPR: +
SpO2 monitoring: Hemoglobin monitoring
ECG monitoring: opt
CO2 monitoring: opt
Ordering Information
• Please confirm the required model, quantity, delivery location and clinical department before ordering.
• Confirm accessories, optional configurations, installation requirements and local regulatory requirements before purchase.
• For hospital projects, Nass Ventures can support sourcing, procurement and equipment planning depending on the final configuration.
Overview
The DIXION BabyGuard I-1125 is a transport infant incubator designed for intensive care and neonatal transportation, including use in neonatology departments and ambulances depending on configuration.
Product Notes
Infant Incubator Babyguard I-1125 (Transport) with computer controlled air-temp/skin-temp
system is equipped with built-in battery, that allows using it in neonatology department as well
Applications
• Neonatology departments
• NICU and newborn intensive care areas
• Maternity and paediatric clinical settings
• Ambulance or in-hospital neonatal transport depending on configuration
Key Features
• Mode of control: Air mode and Baby mode controlled by micro-computer
• AC/DC power alternatively
• Multiple failure alarm indication
• Passive air humidification in the chamber
• Double-walled hood (acrylic-glass) with side door(so that the bassinet can be pulled out from it)
• The height of the unit is adjustable
• Oxygen supply system
• Observation lamp
• Set temp/Air temp/Baby temp/battery capacity
• can be displayed separately
• >37°C temperature set function (optional)
• Main Body (Hood, Controller, Bassinet, Internal battery,Observation lamp)
• Oxygen Cylinders
• Skin temperature sensor
• I.V. Pole
• Mattress
• Adjustable stand
• 37°C override temperature mode
Ordering Information
• Please confirm the required model, quantity, delivery location and clinical department before ordering.
• Confirm accessories, optional configurations, installation requirements and local regulatory requirements before purchase.
• For hospital projects, Nass Ventures can support sourcing, procurement and equipment planning depending on the final configuration.
Dixion Classic Bed Four-Section Electric Hospital Bed
Overview
The Dixion Classic Bed is a four-section electric functional hospital bed intended for inpatient wards, nursing areas and long-stay patient care. The source identifies an electric drive system, four-section construction, overall dimensions of 217 x 95 x 108 cm and load capacity up to 250 kg. The bed is suitable where patient positioning, staff access and safe transfer workflows are important.
Key Features
- Four-section functional bed for hospital and care environments.
- Electric adjustment system for key bed positioning functions depending on selected model.
- Source page identifies electric adjustment of bed height, backrest section and knee section, with bed-tilt functions on selected models.
- Lockable operator controls and patient control groups are referenced in the source specification section.
- Mobile base with four castors and wheel braking system for controlled movement.
- Suitable for facilities procuring ward beds, recovery beds or long-stay patient beds.
Specification Highlights
- Dimensions: 217 x 95 x 108 cm according to source page
- Load capacity: up to 250 kg according to source page
- Sections: 4
- Drive: electric
- Castors: 4, according to source specification
Clinical Applications
- Hospital wards
- Recovery areas
- Nursing facilities
- Long-stay patient care
- Private hospital rooms
Procurement and Configuration Notes
- Specifications, accessories, software, consumables and compatibility can vary depending on model version, condition and selected configuration.
- Please confirm required department, quantity, destination, power requirements, language/software settings, mounting, cables and consumables before ordering.
- For patient-connected devices, confirm local regulatory requirements, clinical training, service support and biomedical engineering checks before clinical use.
Rakhmanov DIXION DH-C101A02 Maternity Chair-Bed
The Rakhmanov DIXION DH-C101A02 maternity chair-bed is designed specifically for patients in obstetrics and gynaecology departments. It is suitable for use during pre-labour, labour, delivery and postpartum recovery, allowing the patient to remain on one bed throughout the maternity care process.
More than a standard bed for rest and recovery, the DH-C101A02 provides a multifunctional birthing solution with electric adjustments, ergonomic positioning and practical features that support both the mother and medical staff. The bed can be easily converted from a bed position into a chair position, helping clinicians respond quickly during labour while maintaining patient comfort and safety.
Its electric motorised adjustment system allows easy positioning, including height adjustment, tilt adjustment and chair-bed conversion. The ergonomic design supports a wide range of birthing positions and helps improve workflow efficiency in maternity hospitals, labour wards, obstetric units and gynaecology departments.
Key Features
• Multifunctional maternity chair-bed for obstetrics and gynaecology departments
• Suitable for pre-labour, labour, delivery and postpartum recovery
• Electric motorised adjustments for easier patient positioning
• Can be converted from bed position to chair position
• Designed for comfort and safety during childbirth
• Supports efficient workflow for obstetricians and clinical staff
• Removable foot section for improved access to mother and newborn
• Swivel wheels for easier movement and positioning
• Central brake system for stable locking in the required location
• Can support resuscitation measures if required
• Knee pads and palm rests included for patient support
• Amniotic fluid/waste reservoir included
• Foldable handrails for added support and safety
• Hand-held remote control included
• Optional foot control available
• Designed and manufactured in accordance with international quality and safety standards
Product Overview
| Product | Details |
|---|---|
| Model | Rakhmanov DIXION DH-C101A02 |
| Product Type | Maternity chair-bed / birthing bed |
| Clinical Use | Obstetrics and gynaecology |
| Main Applications | Pre-labour, labour, delivery and postpartum recovery |
| Adjustment Type | Electric motorised adjustment |
| Positioning | Bed position, chair position, tilt and height adjustment |
| Mobility | Swivel wheels with central brake system |
| Foot Section | Removable foot section |
| Control | Hand-held remote control |
| Optional Control | Foot remote control |
| Warranty | 12 months from date of sale |
Clinical Applications
| Application | Use |
|---|---|
| Pre-Labour Care | Provides comfortable patient positioning before active labour |
| Labour and Delivery | Supports different birthing positions and clinician access |
| Postpartum Recovery | Allows the mother to rest and recover after delivery |
| Obstetric Procedures | Suitable for maternity and obstetric treatment workflows |
| Gynaecology Departments | Can be used in specialist women’s health departments |
| Emergency Response | Can support resuscitation measures when required |
| Mother and Newborn Care | Removable foot section improves access during and after delivery |
Electric Adjustment Functions
| Function | Benefit |
|---|---|
| Height Adjustment | Allows staff to set a suitable working height |
| Tilt Adjustment | Supports clinical positioning during labour and procedures |
| Chair Position | Converts the bed into a chair position for efficient delivery support |
| Bed Position | Provides a comfortable surface for resting and recovery |
| Position Adjustment | Allows flexible adjustment according to patient and clinical needs |
| Remote Control Operation | Enables quick and convenient adjustment by staff |
Ergonomics and Workflow
During labour, every minute is important. The DIXION DH-C101A02 is designed to reduce unnecessary movement, improve access to the patient and make equipment adjustment easier for clinical staff.
The electric drive system allows staff to reposition the bed without physical strain. The chair-bed conversion helps medical teams adapt quickly during different stages of labour, while the removable foot section allows unobstructed access to the mother and newborn.
Ergonomic Advantages
| Feature | Benefit |
|---|---|
| Electric Motorised Adjustment | Reduces physical effort for staff |
| Bed-to-Chair Conversion | Supports efficient labour and delivery positioning |
| Removable Foot Section | Provides improved access during delivery |
| Wide Positioning Options | Supports different birthing positions |
| Hand-Held Remote Control | Allows quick adjustment during clinical use |
| Optional Foot Control | Gives staff another control option during procedures |
| Foldable Handrails | Provides support while allowing access when required |
| Knee Pads and Palm Rests | Improves patient support and comfort |
Mobility and Stability
The DH-C101A02 is equipped with swivel wheels, allowing the bed to be moved and repositioned with minimal effort. Once positioned, the central brake system locks the wheels securely, helping keep the bed stable during examinations, labour and procedures.
| Mobility Feature | Details |
|---|---|
| Wheels | Swivel wheels for easy movement |
| Brake System | Central brake system for wheel locking |
| Positioning | Allows easy movement within the ward or delivery room |
| Stability | Firm and secure fixation when brakes are applied |
Comfort and Safety
The Rakhmanov DIXION DH-C101A02 has been designed to support a comfortable and clinically effective birthing environment. Its positioning options allow the patient to be placed in different positions during labour, while included accessories such as knee supports, palm rests and foldable handrails help improve support and safety.
The bed also includes a waste tank, waterproof covers and soft sections to support hygiene and comfort during clinical use.
Comfort and Safety Features
| Feature | Benefit |
|---|---|
| Soft Bed Sections | Improves patient comfort |
| Waterproof Covers | Supports hygiene and easier cleaning |
| Knee Supports | Helps support patient positioning during labour |
| Palm Rests | Provides additional patient support |
| Foldable Handrails | Helps improve patient safety and support |
| Waste Tank | Supports fluid collection during procedures |
| Removable Table | Provides additional practical support during care |
| Infusion Stand | Allows IV support when required |
Included Equipment
| Included Item | Quantity / Details |
|---|---|
| DIXION DH-C101A02 Maternity Chair-Bed | 1 unit |
| Leg Holders with Popliteal Supports | 2 pieces, with covers |
| Palm Rests | 2 pieces |
| Accessory Mounts | 4 pieces |
| Waste Tank | Included |
| Infusion Stand | Included |
| Removable Table | Included |
| Soft Sections for Main Bed Area | Included |
| Waterproof Covers | Included |
| Power Cable | Included |
| Hand-Held Remote Control | Included |
| Foot Remote Control | Optional |
| Additional Accessories and Spare Parts | Available upon request |
Quality and Standards
The DIXION DH-C101A02 maternity chair-bed is designed and manufactured in accordance with recognised international standards, including ISO 13485, ISO 9001 and IEC 601-1.
| Standard | Description |
|---|---|
| ISO 13485 | Quality management standard for medical devices |
| ISO 9001 | Quality management system standard |
| IEC 601-1 | Electrical safety standard for medical electrical equipment |
Why Choose the Rakhmanov DIXION DH-C101A02?
The Rakhmanov DIXION DH-C101A02 is a practical and multifunctional maternity chair-bed designed to support the full maternity care pathway. It allows the patient to remain on one bed during pre-labour, labour, delivery and postpartum recovery, reducing unnecessary transfers and improving workflow efficiency.
Its electric adjustment system, removable foot section, central brake system and included delivery accessories make it suitable for modern maternity departments that need a reliable, comfortable and flexible birthing bed.
The DH-C101A02 is suitable for healthcare facilities that want to improve patient comfort, support safe childbirth and give obstetric staff faster access during labour and delivery.
Suitable For
• Maternity hospitals
• Labour and delivery rooms
• Obstetrics departments
• Gynaecology departments
• Women’s health centres
• Private hospitals
• Specialist maternity clinics
• Postpartum recovery areas
• Emergency obstetric care units
Warranty
The manufacturer provides a 12-month warranty from the date of sale. The warranty covers defects in design and materials.
Ordering Information
Available configurations may vary depending on accessories, spare parts and optional controls. Please contact Nass Ventures for pricing, delivery, installation support, accessory options and after-sales service.
Important: Optional accessories, foot control and spare parts may need to be ordered separately depending on the selected configuration.
DIXION DH-C101A04 Obstetric Transformer Bed is supplied by Nass Ventures for maternity, obstetrics and gynaecology departments, hospital procurement projects and clinical facility planning.
This product information has been translated and rewritten in English from the supplier listing for use in a Nass Ventures Shopify catalogue.
Key Features
- Transformer delivery chair-bed designed for obstetric and gynaecology departments
- Suitable for labour, delivery and postnatal recovery stages
- Electric motorised positioning
- Side-rail touch control panels, hand remote control and optional foot control
- Battery support and night lighting listed on the product category page
- Includes leg holders, hand supports, accessory clamps, waste reservoir, infusion stand, removable table, soft sections, waterproof covers and power cable
Ordering Information
Supplier pricing is listed as quotation-based. Please contact Nass Ventures to confirm current availability, final quotation, compatible accessories, installation requirements, delivery options and technical support before ordering.
DIXION ET 200 Electromechanical Operating Table
DIXION ET 200 Electromechanical Operating Table is a electromechanical operating table from DIXION, listed for surgical and clinical patient-positioning applications. It is intended to support safe, stable and efficient positioning during medical procedures, with configuration dependent on the selected model and accessories.
This product is suitable for operating theatres, surgical centres, hospitals and specialist departments requiring reliable patient positioning during procedures.
Key Features
- Electromechanical drive
- 4-section table design
- 200 kg load capacity
- Battery operation for approximately 40–50 procedures
- Optional doctor’s chair available
- Suitable for ophthalmology and specialist procedures
Applications
- General surgery and operating room procedures
- Orthopaedics, trauma, endoscopy and specialist surgical workflows where suitable accessories are selected
- Hospital theatre upgrades, new theatre projects and equipment replacement programmes
- Patient positioning and clinical support during procedures
Availability: In stock. Pricing is supplied on quotation because final cost depends on configuration, accessories, shipment, installation and support requirements.
Ordering Information
This product is available for quotation and supply based on the required specification, quantity, and delivery location. Final pricing may vary depending on the selected configuration, accessories, availability, and any additional service requirements.
To request a quotation, please provide:
- Product name or model
- Required quantity
- Delivery location
- Intended use or department
- Required configuration or options
- Any accessories or consumables needed
- Installation, training, or maintenance requirements, if applicable
Supply and Delivery
We can assist with product sourcing, procurement, and delivery for hospitals, clinics, laboratories, universities, research centres, and healthcare facilities. Delivery options may vary depending on product size, weight, destination, stock availability, and import requirements.
For larger or technical equipment, delivery may include coordination for safe handling, site access, installation readiness, and commissioning support where required.
Configuration and Accessories
Some products may be available in different configurations or with optional accessories. The final specification should be confirmed before ordering to ensure the product is suitable for the intended application.
Common options may include:
- Standard or advanced model configuration
- Required accessories
- Consumables or starter kits
- Mounting or trolley options
- Power requirements
- Software or upgrade options
- Spare parts and maintenance items
Warranty and After-Sales Support
Warranty terms depend on the product, manufacturer, supplier, and selected package. Where applicable, we can support customers with setup guidance, user training, preventive maintenance, spare parts sourcing, and long-term technical assistance.
Customers are encouraged to confirm warranty coverage, service terms, and consumable availability before purchase.
Important Note
Product specifications, images, availability, accessories, and prices may vary depending on manufacturer updates, regional supply, and selected configuration. Final details should be confirmed at quotation stage before purchase.
DIXION ET 500 Electromechanical Operating Table
DIXION ET 500 Electromechanical Operating Table is a electromechanical operating table from DIXION, listed for surgical and clinical patient-positioning applications. It is intended to support safe, stable and efficient positioning during medical procedures, with configuration dependent on the selected model and accessories.
This product is suitable for operating theatres, surgical centres, hospitals and specialist departments requiring reliable patient positioning during procedures.
Key Features
- Electromechanical drive system
- 5-section tabletop
- Adapted for C-arm work with longitudinal shift
- Adjustable head section bend
- Remote control with display, charge indication and duplicate control panel
- 250 kg load capacity
Applications
- General surgery and operating room procedures
- Orthopaedics, trauma, endoscopy and specialist surgical workflows where suitable accessories are selected
- Hospital theatre upgrades, new theatre projects and equipment replacement programmes
- Patient positioning and clinical support during procedures
Availability: In stock. Pricing is supplied on quotation because final cost depends on configuration, accessories, shipment, installation and support requirements.
Ordering Information
This product is available for quotation and supply based on the required specification, quantity, and delivery location. Final pricing may vary depending on the selected configuration, accessories, availability, and any additional service requirements.
To request a quotation, please provide:
- Product name or model
- Required quantity
- Delivery location
- Intended use or department
- Required configuration or options
- Any accessories or consumables needed
- Installation, training, or maintenance requirements, if applicable
Supply and Delivery
We can assist with product sourcing, procurement, and delivery for hospitals, clinics, laboratories, universities, research centres, and healthcare facilities. Delivery options may vary depending on product size, weight, destination, stock availability, and import requirements.
For larger or technical equipment, delivery may include coordination for safe handling, site access, installation readiness, and commissioning support where required.
Configuration and Accessories
Some products may be available in different configurations or with optional accessories. The final specification should be confirmed before ordering to ensure the product is suitable for the intended application.
Common options may include:
- Standard or advanced model configuration
- Required accessories
- Consumables or starter kits
- Mounting or trolley options
- Power requirements
- Software or upgrade options
- Spare parts and maintenance items
Warranty and After-Sales Support
Warranty terms depend on the product, manufacturer, supplier, and selected package. Where applicable, we can support customers with setup guidance, user training, preventive maintenance, spare parts sourcing, and long-term technical assistance.
Customers are encouraged to confirm warranty coverage, service terms, and consumable availability before purchase.
Important Note
Product specifications, images, availability, accessories, and prices may vary depending on manufacturer updates, regional supply, and selected configuration. Final details should be confirmed at quotation stage before purchase.
DIXION ET 700S Electrohydraulic Operating Table
DIXION ET 700S Electrohydraulic Operating Table is a electrohydraulic operating table from DIXION, listed for surgical and clinical patient-positioning applications. It is intended to support safe, stable and efficient positioning during medical procedures, with configuration dependent on the selected model and accessories.
This product is suitable for operating theatres, surgical centres, hospitals and specialist departments requiring reliable patient positioning during procedures.
Key Features
- Electrohydraulic drive
- 7-section tabletop
- Adapted for C-arm operation with longitudinal shift
- Easy Click system
- Duplicate control panel in the table column
- 300 kg load capacity
Applications
- General surgery and operating room procedures
- Orthopaedics, trauma, endoscopy and specialist surgical workflows where suitable accessories are selected
- Hospital theatre upgrades, new theatre projects and equipment replacement programmes
- Patient positioning and clinical support during procedures
Availability: Quotation requested. Pricing is supplied on quotation because final cost depends on configuration, accessories, shipment, installation and support requirements.
Ordering Information
This product is available for quotation and supply based on the required specification, quantity, and delivery location. Final pricing may vary depending on the selected configuration, accessories, availability, and any additional service requirements.
To request a quotation, please provide:
- Product name or model
- Required quantity
- Delivery location
- Intended use or department
- Required configuration or options
- Any accessories or consumables needed
- Installation, training, or maintenance requirements, if applicable
Supply and Delivery
We can assist with product sourcing, procurement, and delivery for hospitals, clinics, laboratories, universities, research centres, and healthcare facilities. Delivery options may vary depending on product size, weight, destination, stock availability, and import requirements.
For larger or technical equipment, delivery may include coordination for safe handling, site access, installation readiness, and commissioning support where required.
Configuration and Accessories
Some products may be available in different configurations or with optional accessories. The final specification should be confirmed before ordering to ensure the product is suitable for the intended application.
Common options may include:
- Standard or advanced model configuration
- Required accessories
- Consumables or starter kits
- Mounting or trolley options
- Power requirements
- Software or upgrade options
- Spare parts and maintenance items
Warranty and After-Sales Support
Warranty terms depend on the product, manufacturer, supplier, and selected package. Where applicable, we can support customers with setup guidance, user training, preventive maintenance, spare parts sourcing, and long-term technical assistance.
Customers are encouraged to confirm warranty coverage, service terms, and consumable availability before purchase.
Important Note
Product specifications, images, availability, accessories, and prices may vary depending on manufacturer updates, regional supply, and selected configuration. Final details should be confirmed at quotation stage before purchase.
DIXION ET 800 Electrohydraulic Operating Table
DIXION ET 800 Electrohydraulic Operating Table is a electrohydraulic operating table from DIXION, listed for surgical and clinical patient-positioning applications. It is intended to support safe, stable and efficient positioning during medical procedures, with configuration dependent on the selected model and accessories.
This product is suitable for operating theatres, surgical centres, hospitals and specialist departments requiring reliable patient positioning during procedures.
Key Features
- Electrohydraulic drive
- 8-section modular tabletop
- Hydraulic brakes
- Modular construction with Easy Click system
- Remote control with display and charge indication, plus duplicate panel
- 350 kg load capacity
Applications
- General surgery and operating room procedures
- Orthopaedics, trauma, endoscopy and specialist surgical workflows where suitable accessories are selected
- Hospital theatre upgrades, new theatre projects and equipment replacement programmes
- Patient positioning and clinical support during procedures
Availability: Quotation requested. Pricing is supplied on quotation because final cost depends on configuration, accessories, shipment, installation and support requirements.
Ordering Information
This product is available for quotation and supply based on the required specification, quantity, and delivery location. Final pricing may vary depending on the selected configuration, accessories, availability, and any additional service requirements.
To request a quotation, please provide:
- Product name or model
- Required quantity
- Delivery location
- Intended use or department
- Required configuration or options
- Any accessories or consumables needed
- Installation, training, or maintenance requirements, if applicable
Supply and Delivery
We can assist with product sourcing, procurement, and delivery for hospitals, clinics, laboratories, universities, research centres, and healthcare facilities. Delivery options may vary depending on product size, weight, destination, stock availability, and import requirements.
For larger or technical equipment, delivery may include coordination for safe handling, site access, installation readiness, and commissioning support where required.
Configuration and Accessories
Some products may be available in different configurations or with optional accessories. The final specification should be confirmed before ordering to ensure the product is suitable for the intended application.
Common options may include:
- Standard or advanced model configuration
- Required accessories
- Consumables or starter kits
- Mounting or trolley options
- Power requirements
- Software or upgrade options
- Spare parts and maintenance items
Warranty and After-Sales Support
Warranty terms depend on the product, manufacturer, supplier, and selected package. Where applicable, we can support customers with setup guidance, user training, preventive maintenance, spare parts sourcing, and long-term technical assistance.
Customers are encouraged to confirm warranty coverage, service terms, and consumable availability before purchase.
Important Note
Product specifications, images, availability, accessories, and prices may vary depending on manufacturer updates, regional supply, and selected configuration. Final details should be confirmed at quotation stage before purchase.
DIXION Gel Pillow 1101-1 for Prone Patient Positioning
DIXION Gel Pillow 1101-1 for Prone Patient Positioning is a gel pillow for patient positioning during ventilation from DIXION, listed for surgical and clinical patient-positioning applications. It is intended to support safe, stable and efficient positioning during medical procedures, with configuration dependent on the selected model and accessories.
This positioning accessory is suitable for hospital and critical-care environments where safe patient support, pressure management and procedural positioning are required.
Key Features
- Suitable for prone positioning
- Silicone-free and latex-free
- Usable at temperatures from -10°C to +50°C
- Designed with the height required for connection to mechanical ventilation workflows
Applications
- General surgery and operating room procedures
- Orthopaedics, trauma, endoscopy and specialist surgical workflows where suitable accessories are selected
- Hospital theatre upgrades, new theatre projects and equipment replacement programmes
- Patient positioning and clinical support during procedures
Availability: Quotation requested. Pricing is supplied on quotation because final cost depends on configuration, accessories, shipment, installation and support requirements.
Ordering Information
This product is available for quotation and supply based on the required specification, quantity, and delivery location. Final pricing may vary depending on the selected configuration, accessories, availability, and any additional service requirements.
To request a quotation, please provide:
- Product name or model
- Required quantity
- Delivery location
- Intended use or department
- Required configuration or options
- Any accessories or consumables needed
- Installation, training, or maintenance requirements, if applicable
Supply and Delivery
We can assist with product sourcing, procurement, and delivery for hospitals, clinics, laboratories, universities, research centres, and healthcare facilities. Delivery options may vary depending on product size, weight, destination, stock availability, and import requirements.
For larger or technical equipment, delivery may include coordination for safe handling, site access, installation readiness, and commissioning support where required.
Configuration and Accessories
Some products may be available in different configurations or with optional accessories. The final specification should be confirmed before ordering to ensure the product is suitable for the intended application.
Common options may include:
- Standard or advanced model configuration
- Required accessories
- Consumables or starter kits
- Mounting or trolley options
- Power requirements
- Software or upgrade options
- Spare parts and maintenance items
Warranty and After-Sales Support
Warranty terms depend on the product, manufacturer, supplier, and selected package. Where applicable, we can support customers with setup guidance, user training, preventive maintenance, spare parts sourcing, and long-term technical assistance.
Customers are encouraged to confirm warranty coverage, service terms, and consumable availability before purchase.
Important Note
Product specifications, images, availability, accessories, and prices may vary depending on manufacturer updates, regional supply, and selected configuration. Final details should be confirmed at quotation stage before purchase.
Description
- Suitable for use in the prone position for artificial ventilation.
- The material of anti-decubitus mattresses does not include silicone and latex.
- A wide range of shapes and sizes allows for the most comfortable positioning of the patient
- The mattresses are radiolucent and have antibacterial properties.
- Do not lose elastic properties at temperatures from -10° C to 50° C
- Easy to disinfect
- Have a long service life
- Effective and easy to use
Head and neck mattresses
Gel anti-decubitus mattresses for prone positioning are used to support and protect the head and face of patients lying prone, helping to administer anesthesia and avoid airway compression. Model 1101-2 is also used for positioning patients after ophthalmological surgery.
Gel head pillow for face down position
Purpose: to support the patient's head during surgical operations when the patient is in a motionless position with his stomach down, as well as to maintain access to the airway
 |
1101-1 | 28*24*14cm |
|
1101-2 | 25*20*10cm |
|
1101-3 | 23*20*11.5 cm |
|
1101-4 | 23*20*6cm |
 |
1101-6 | 28*24*14cm |
 |
1101-8 (children's) | 20*16*11cm |
 |
1101-9 (children's) | 21*18*11cm |
 |
1101-11 | 23*20*11.5 cm |
| 1101-12 | 24*20*13cm | |
|
1101-13 | 24*20*13cm |
Gel anti-decubitus mattresses have ring-shaped headrests with rounded edges, which are used to protect and gently position the head during general, plastic, ophthalmological, and ENT surgeries.
Gel head pillow, ring-shaped, cup-shaped
Purpose: to fix the patient's head during surgical operations with the patient in a motionless position on his back
 |
1102-1 | 20*7*7cm |
 |
1102-2 | 20*7*5cm |
| 1102—3 Children's | 14*5*3cm | |
| 1102-4 Children's | 10*4*2.5 cm | |
| 1102—5 Newborn | 8*3*2cm | |
| 1102-6 | 20*7*3cm | |
| 1102—7 Children's | 14*7*2.5 cm | |
| 1102—8 Children's | 14*5*2.5 cm | |
| 1102-9 | 18*10*3.5cm | |
| 1102-10 | 20*12*3.5 cm | |
| 1102-11 | 22*15*3.5cm | |
 |
1107-1 | External: 20*5cm Internal: 8*2cm |
| 1107-2 Children's | External: 14*3cm Internal: 6*1.5cm | |
| 1107-3 | External: 20*5cm Internal: 8.5*3cm | |
|
1109-1 | 20*7*4（-1.5）cm |
| 1109-2 | 20*9*5（-1.5）cm |
Horseshoe-shaped anti-decubitus mattresses with rounded edges are used to prevent compression of the airway and facilitate the insertion of anesthesia tubes for patients lying on their stomach or side.
Horseshoe-shaped and cup-shaped gel head pillow
Purpose: to fix the patient's head during surgical operations with the patient in a motionless position on his back, maintaining access to the airway
 |
1103-1 | 20*7*7cm |
|
1103-2 | 20*7*5cm |
| 1103-3 Children's | 14*5*3cm | |
| 1103-4 Children's | 10*4*2.5 cm | |
| 1103-5 Newborn | 8*3*2cm | |
| 1103-6 | 20*7*3cm | |
 |
1103-7 | 20*7*5cm |
 |
1108-1 | 20*5.5 cm |
| 1108-2 Children's | 14*3.5 cm |
Universal head pillows can be used to provide any comfortable position for the patient's head during long surgeries.
Universal gel head pillow
Purpose: for comfortable positioning of the patient's head during surgical operations
 |
1104 | 18*18*8cm |
 |
1106-1 | 25*23*6 cm |
| 1106-2 | 25*18*3cm | |
 |
1106-3 | 45*15*10cm |
Ophthalmic gel head pillow
Purpose: to fix the patient's head during ophthalmological surgeries
 |
1105-1 | 23*23*4cm |
| 1105-2 | 22*19*6cm | |
|
1105-3 | 24*22*7cm |
The thyroid surgery mattress is used for comfortable neck positioning and helps facilitate surgeon access to this area. It is recommended to use the 1110-1 with the 1110-2 round headrest.
Gel pillow for positioning the thyroid gland area (set)
Purpose: to provide the surgeon with maximum access to the patient's cervical spine during surgical procedures
 |
1110-1 and 1110-2 | |
 |
1110-3 | 48*39*9cm |
Mattresses for arms and shoulders
Universal arm mattresses are used in conjunction with an arm support
Flat gel pillow for the arm
Purpose: to distribute the weight of the patient's arm over a large area to prevent the formation of pressure sores and tissue necrosis
Gel pad with a strap for elbow protection
Purpose: to protect the elbow joint during surgery
Gel pad with strap for wrist protection
Purpose: to protect the wrist joint during surgery
Small gel pillow
Purpose: to position the patient's wrist
 |
2101-1 | 40*16*1cm |
| 2101-2 | 60*16*1cm | |
| 2101-3 | 75*16*2cm | |
|
2102 | 40*15*1.5 cm |
 |
2103 | 25*5*1cm |
| 2103-1 | 32*5*1cm | |
 |
2109-1 | 10*5*2cm |
|
2109-2 | 10*6.5*2cm |
Lateral mattresses are used for surgeries with the patient in the lateral position, with the arm positioned overhead and the use of body mattresses. For kidney surgeries, a semicircular bolster is required.
To position the patient, the upper part of the tabletop is tilted downward so that the mattress surface forms a horizontal surface with the non-tilted sections of the tabletop. The patient, lying supine, is then anesthetized and turned onto their side.
Lateral gel pillow for the torso
Purpose: for performing any surgical operations on the side, with an outstretched arm
 |
3101-1 | 72*46*15cm |
| 3101-2 | 70*50*16 cm |
Mattresses for chest and body
Mattresses for prone positioning are used to reduce pressure on the chest tissue, facilitate the patient's breathing and improve blood circulation during spinal surgery.
Gel torso pillow for face-down position
Purpose: To distribute the patient's chest weight over a large area to prevent pressure ulcers and tissue necrosis. It has a space in the abdominal area to facilitate breathing.
Gel cushion for the operating table bed
Purpose: to distribute the weight of various parts or the entire patient's body over a large area in order to avoid the formation of pressure ulcers and tissue necrosis
 |
5101-1 | 50*23*1.5 cm |
| 5101-2 | 100*50*1.5 cm | |
| 5101-3 | 50*50*1.5 cm | |
| 5101-6 | 100*50*1.5 cm | |
| 5101-7 | 50*50*1.5 cm | |
 |
5101-10 | 180*50*1.5 cm |
Ordering Information
This product is available for quotation and supply based on the required specification, quantity, and delivery location. Final pricing may vary depending on the selected configuration, accessories, availability, and any additional service requirements.
To request a quotation, please provide:
- Product name or model
- Required quantity
- Delivery location
- Intended use or department
- Required configuration or options
- Any accessories or consumables needed
- Installation, training, or maintenance requirements, if applicable
Supply and Delivery
We can assist with product sourcing, procurement, and delivery for hospitals, clinics, laboratories, universities, research centres, and healthcare facilities. Delivery options may vary depending on product size, weight, destination, stock availability, and import requirements.
For larger or technical equipment, delivery may include coordination for safe handling, site access, installation readiness, and commissioning support where required.
Configuration and Accessories
Some products may be available in different configurations or with optional accessories. The final specification should be confirmed before ordering to ensure the product is suitable for the intended application.
Common options may include:
- Standard or advanced model configuration
- Required accessories
- Consumables or starter kits
- Mounting or trolley options
- Power requirements
- Software or upgrade options
- Spare parts and maintenance items
Warranty and After-Sales Support
Warranty terms depend on the product, manufacturer, supplier, and selected package. Where applicable, we can support customers with setup guidance, user training, preventive maintenance, spare parts sourcing, and long-term technical assistance.
Customers are encouraged to confirm warranty coverage, service terms, and consumable availability before purchase.
Important Note
Product specifications, images, availability, accessories, and prices may vary depending on manufacturer updates, regional supply, and selected configuration. Final details should be confirmed at quotation stage before purchase.
Dixion HD-1 Portable Defibrillator Monitor
Overview
The Dixion HD-1 is a portable external defibrillator monitor intended for emergency and clinical resuscitation workflows. The source page identifies biphasic operation, a weight of 4.7 kg, 3 to 12 display channels, cardioversion synchronisation and optional pulse oximetry and non-invasive blood pressure measurement. It is suitable for hospitals, ambulances and emergency teams requiring a monitor-defibrillator rather than a simple AED.
Key Features
- Portable external monitor-defibrillator for emergency response and resuscitation workflows.
- Biphasic operation identified in the source page.
- 3 to 12 display channels referenced in the uploaded product data.
- Cardioversion synchronisation is noted in the source page.
- Optional pulse oximetry and non-invasive blood pressure measurement are referenced in the source data.
- Confirm paddles, pads, ECG cable, battery, charger, printer and monitoring options before ordering.
Specification Highlights
- Weight: 4.7 kg according to source page
- Waveform/operation: biphasic according to source page
- Display channels: 3 to 12 channels according to source page
- Cardioversion synchronisation: referenced in source page
- Optional parameters: SpO2 and NIBP noted in source page
Clinical Applications
- Emergency departments
- Ambulances
- ICU and critical care units
- Operating and recovery departments
- Hospital resuscitation trolleys
Procurement and Configuration Notes
- Specifications, accessories, software, consumables and compatibility can vary depending on model version, condition and selected configuration.
- Please confirm required department, quantity, destination, power requirements, language/software settings, mounting, cables and consumables before ordering.
- For patient-connected devices, confirm local regulatory requirements, clinical training, service support and biomedical engineering checks before clinical use.
Dixion Heart PAD Automatic External Defibrillator
Overview
The Dixion Heart PAD is an automatic external defibrillator intended for emergency response environments where fast guidance and clear user prompts are important. The source page describes voice prompts, auxiliary indicators and up to 8 hours of continuous operation. It is suitable for public-access, clinic, workplace, ambulance and hospital readiness programmes, subject to local regulations, training and service requirements.
Key Features
- Automatic external defibrillator for emergency cardiac response workflows.
- Voice prompts help guide the rescuer through use of the device.
- Auxiliary indicators provide additional user guidance during operation.
- Continuous operation of up to 8 hours is noted in the source page.
- Designed for quick deployment in clinical and non-clinical emergency locations.
- Final pad type, battery pack, carry case, paediatric option and service accessories should be confirmed before ordering.
Specification Highlights
- Operating type: automatic external defibrillator
- User guidance: voice prompts and auxiliary indicators
- Continuous operation: up to 8 hours according to source page
Clinical Applications
- Hospitals and clinics
- Ambulance and emergency response teams
- Workplaces and public-access AED programmes
- Schools, hotels, gyms and community facilities
Procurement and Configuration Notes
- Specifications, accessories, software, consumables and compatibility can vary depending on model version, condition and selected configuration.
- Please confirm required department, quantity, destination, power requirements, language/software settings, mounting, cables and consumables before ordering.
- For patient-connected devices, confirm local regulatory requirements, clinical training, service support and biomedical engineering checks before clinical use.
Dixion Instilar 1438 Single-Syringe Modular Infusion Pump
Overview
The Dixion Instilar 1438 is a single-syringe modular infusion pump for controlled syringe-based infusion therapy. The source page identifies docking of up to four pumps into one system, more than 10 hours of operation, patient weight range of 3 to 150 kg, infusion volume range of 0.0001 to 99399 ml and mass of 2.2 kg. It is suitable for departments requiring compact modular syringe infusion capability.
Key Features
- Single-syringe modular infusion pump for controlled infusion delivery.
- Docking of up to four pumps into one system is referenced in the source page.
- More than 10 hours of operation is identified in the source data.
- Patient weight range of 3 to 150 kg is noted in the source page.
- Infusion volume range of 0.0001 to 99399 ml is referenced in the source data.
- Confirm syringe compatibility, drug library/settings, docking station, battery condition and alarm features before ordering.
Specification Highlights
- Pump type: single-syringe modular infusion pump
- Docking: up to 4 pumps in one system according to source page
- Operating time: more than 10 hours according to source page
- Patient weight range: 3 to 150 kg according to source page
- Mass: 2.2 kg according to source page
Clinical Applications
- ICU and HDU
- Operating rooms
- Neonatal and paediatric areas depending on protocol
- General infusion therapy
- Modular pump workstations
Procurement and Configuration Notes
- Specifications, accessories, software, consumables and compatibility can vary depending on model version, condition and selected configuration.
- Please confirm required department, quantity, destination, power requirements, language/software settings, mounting, cables and consumables before ordering.
- For patient-connected devices, confirm local regulatory requirements, clinical training, service support and biomedical engineering checks before clinical use.
Dixion Instilar 1486 Volumetric Infusion Pump
Overview
The Dixion Instilar 1486 is a volumetric infusion pump intended for controlled delivery of infusion therapy. The source page identifies a flow/setting range of 1 to 1200 ml/hour, an LED display showing infusion speed and an integrated warmer. It is suited to wards, emergency departments, operating rooms and intensive care settings where predictable infusion delivery and clear rate display are required.
Key Features
- Volumetric infusion pump for controlled infusion therapy.
- Flow/setting range of 1 to 1200 ml/hour is referenced in the source page.
- LED display with infusion speed is noted in the source data.
- Integrated warmer is referenced in the uploaded product information.
- Suitable for routine and higher-acuity infusion workflows, depending on clinical protocol and consumables.
- Confirm compatible infusion sets, battery condition, alarm functions, service status and language/software settings before ordering.
Specification Highlights
- Flow/setting range: 1 to 1200 ml/hour according to source page
- Display: LED display with infusion speed according to source page
- Warmer: referenced in source page
- Pump type: volumetric infusion pump
Clinical Applications
- Hospital infusion therapy
- ICU and HDU
- Emergency departments
- Operating rooms
- Recovery and ward care
Procurement and Configuration Notes
- Specifications, accessories, software, consumables and compatibility can vary depending on model version, condition and selected configuration.
- Please confirm required department, quantity, destination, power requirements, language/software settings, mounting, cables and consumables before ordering.
- For patient-connected devices, confirm local regulatory requirements, clinical training, service support and biomedical engineering checks before clinical use.
Dixion Instilar 1487 Enteral Feeding Pump
The Dixion Instilar 1487 is a volumetric pump for enteral feeding and tube-feeding applications. It supports adjustable flow-rate delivery and includes a heater function for facilities that require controlled enteral nutrition delivery.
Key Features
- Designed for enteral feeding / tube-feeding use
- Flow-rate setting from 1 to 2000 ml/h referenced by source page
- Selectable rate steps of 1, 5 and 10 ml/h referenced by source page
- Built-in heater range of 30-40 degrees C referenced by source page
- Suitable for nutritional support workflows depending on protocol
Specification Highlights
- Flow-rate range: 1-2000 ml/h
- Rate step: 1, 5 or 10 ml/h
- Heater: 30-40 degrees C in 1-degree increments
- Use only with compatible enteral-feeding sets and local clinical protocols
Clinical Applications
- Nutrition support units
- ICU and HDU
- Long-term care facilities
- Hospital wards
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Instilar 1488 Volumetric Infusion Pump
The Dixion Instilar 1488 is a volumetric infusion pump for controlled fluid delivery in clinical environments. It is designed for infusion workflows requiring clear rate display, calibration support and practical bedside operation.
Key Features
- LED display
- Manual and automatic calibration referenced by source page
- Ergonomic front panel
- Flow-rate adjustment for controlled infusion
- Suitable for ward, theatre and critical-care infusion workflows depending on protocol
Specification Highlights
- Pump type: volumetric infusion pump
- Display: LED
- Calibration: manual and automatic modes referenced by the source page
- Infusion rate and set compatibility should be confirmed before ordering
Clinical Applications
- Hospital wards
- ICU and HDU
- Operating theatres
- Infusion therapy areas
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Portable Infusion Fluid Warmer
Overview
The Dixion portable infusion fluid warmer is designed to warm infusion solutions during clinical administration. The source page describes a portable warmer with two heating levels and identifies a heating temperature range of 26 to 35 degrees Celsius at flow rates up to 600 ml/hour. It is useful where controlled warming of infused fluids is required, subject to clinical protocol and compatibility with the infusion set.
Key Features
- Portable infusion solution warmer for clinical fluid-warming workflows.
- Two heating levels are referenced in the source page.
- Heating temperature range of 26 to 35 degrees Celsius is noted in the source product data.
- Up to 600 ml/hour is identified in the source page for the heating workflow.
- Useful for wards, emergency care, operating departments and recovery areas where warmed fluids may be required.
- Confirm tubing compatibility, mounting, power supply and cleaning requirements before purchase.
Specification Highlights
- Heating temperature: 26 to 35 degrees Celsius according to source page
- Flow rate reference: up to 600 ml/hour according to source page
- Heating levels: 2 according to source page
- Operating humidity: up to 80 percent noted in source data
Clinical Applications
- Infusion therapy
- Operating rooms
- Emergency departments
- Recovery areas
- Ward fluid warming
Procurement and Configuration Notes
- Specifications, accessories, software, consumables and compatibility can vary depending on model version, condition and selected configuration.
- Please confirm required department, quantity, destination, power requirements, language/software settings, mounting, cables and consumables before ordering.
- For patient-connected devices, confirm local regulatory requirements, clinical training, service support and biomedical engineering checks before clinical use.
Dixion Practice 3000 Anaesthesia Machine
The Dixion Practice 3000 is a pneumatic anaesthesia machine for operating rooms and surgical facilities. It is intended for conventional anaesthesia delivery where compact dimensions, an LCD display and configurable breathing-volume settings are required.
Key Features
- Pneumatic anaesthesia machine
- LCD display
- Tidal volume range referenced by source page: 50-1600 ml
- Dimensions referenced by source page: 1386 x 839 x 628 mm
- Suitable for routine theatre anaesthesia depending on final configuration
Specification Highlights
- Display: LCD
- Tidal volume: 50-1600 ml referenced by source page
- Dimensions: 1386 x 839 x 628 mm
- Configuration should be confirmed for vaporizers, breathing circuit, monitoring and gas supply
Clinical Applications
- Operating theatres
- Day surgery centres
- Procedure rooms
- Anaesthesia training and backup systems
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Practice 3100 Anaesthesia System
The Dixion Practice 3100 is an anaesthesia and respiratory system for surgical and procedural anaesthesia. It supports pneumatic operation and is intended for environments requiring a compact anaesthesia platform with configurable breathing and gas-delivery options.
Key Features
- Pneumatic anaesthesia system
- LCD display
- Tidal volume range referenced by source page: 50-1500 ml
- Support for two vaporizers referenced by source data
- Semi-open and semi-closed circuit operation referenced by source data
Specification Highlights
- Display: LCD
- Tidal volume: 50-1500 ml referenced by source page
- Vaporizers: two-vaporizer arrangement referenced by source data
- Capnometry may be optional; confirm before ordering
Clinical Applications
- Operating theatres
- Surgical centres
- Procedure rooms
- Anaesthesia departments
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Practice 3700 Anaesthesia Workstation
The Dixion Practice 3700 is an anaesthesia and respiratory workstation for operating theatre use. It combines pneumatic operation with a TFT display and is intended for facilities requiring a full anaesthesia platform with ventilation and gas-delivery support.
Key Features
- Anaesthesia and respiratory workstation design
- Pneumatic operating principle referenced by the source page
- TFT display
- Dimensions referenced by the source page: 1000 x 1400 x 770 mm
- Suitable for theatre anaesthesia workflows depending on configuration
Specification Highlights
- Display: TFT
- Operating principle: pneumatic
- Dimensions: 1000 x 1400 x 770 mm
- Final vaporizers, circuits and gas options should be confirmed before ordering
Clinical Applications
- Operating theatres
- Surgical centres
- Anaesthesia departments
- Procedure rooms requiring general anaesthesia support
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Storm 5500 Patient Monitor with CO2 Capnometry
The Dixion Storm 5500 is an ICU-style patient monitor configured with CO2 capnometry. It is intended for continuous bedside observation where ECG, CO2 and network-compatible monitoring are required.
Key Features
- LCD screen
- Monoblock design
- 3- or 5-lead ECG support referenced by source page
- CO2 capnometry module
- LAN compatibility referenced by source page
Specification Highlights
- Display: LCD
- ECG: 3 or 5 leads referenced by source page
- CO2: capnometry module
- Network: LAN compatibility referenced by source page
Clinical Applications
- ICU
- Emergency departments
- Operating room recovery
- High-dependency units
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Storm 5900 Portable ICU Monitor with CO2 Capnometry
The Dixion Storm 5900 is a portable intensive-care monitor with capnometry for high-acuity observation. It combines waveform display, trend recording and optional printing support in a mobile monitoring format.
Key Features
- 10.4-inch TFT display
- Displays up to 11 waveforms referenced by source page
- Built-in thermal printer referenced by source page
- Invasive blood pressure measurement and capnometry referenced by source page
- Trend storage for recent parameter history depending on configuration
Specification Highlights
- Display: colour TFT, 10.4 inches
- Waveforms: up to 11
- Printer: built-in thermal printer
- Parameters: IBP and capnometry referenced by source page
Clinical Applications
- ICU
- Emergency departments
- Theatre recovery
- Transport within high-acuity areas
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Storm D1 Handheld Capnograph with NIBP and SpO2
The Dixion Storm D1 is a touchscreen handheld capnograph for portable respiratory monitoring. This configuration is referenced with NIBP and SpO2 support, making it suitable for spot-check and mobile patient-assessment workflows.
Key Features
- EtCO2 and respiration-rate monitoring
- NIBP and SpO2 configuration referenced by source page
- Optional pulse rate and perfusion index depending on configuration
- 4.3-inch display with 480 x 272 px resolution
- Compact hand-held format
Specification Highlights
- Display: 4.3-inch, 480 x 272 px
- Monitoring: EtCO2, respiration rate, NIBP and SpO2 depending on configuration
- Optional: pulse rate and perfusion index
- SpO2 technology may vary by supplied configuration
Clinical Applications
- Emergency assessment
- Recovery rooms
- Anaesthesia support
- Transport and mobile monitoring
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.
Dixion Storm D1 Handheld Touchscreen Capnograph
The Dixion Storm D1 is a handheld touchscreen capnograph for EtCO2 and respiratory-rate monitoring, with optional additional pulse oximetry parameters depending on configuration.
Key Features
- Handheld touchscreen capnograph
- Measures EtCO2 and respiratory rate
- Optional SpO2, pulse rate, perfusion index and Nellcor SpO2 support depending on configuration
- Compact interface for mobile respiratory monitoring
- Suitable for procedural, emergency and transport monitoring workflows depending on accessories
Specification Highlights
- 4.3 inch touchscreen display
- 480 x 272 px display resolution
- EtCO2 and respiratory-rate monitoring
- Optional SpO2 and pulse parameters
Clinical Applications
- Anaesthesia and recovery
- Emergency departments
- Patient transport
- Respiratory monitoring and procedural sedation
Procurement and Configuration Notes
- Please confirm EtCO2 sampling method, patient category, disposables, SpO2 option and accessories before ordering.
- Confirm quantity, destination, installation requirements, warranty expectations, training needs and after-sales support before purchase.
- Images and source-page specifications are indicative; final supplied accessories and configuration should be confirmed against the manufacturer or supplier quotation.
Dixion Storm D2 Transport Patient Monitor
The Dixion Storm D2 is a lightweight transport patient monitor intended for mobile monitoring and patient transfer. Its compact design and charging station make it practical for departments that need quick movement between bedside, treatment and transfer areas.
Key Features
- Lightweight transport monitor design
- Approximate weight of 600 g referenced by the source page
- Touchscreen interface
- Dedicated charging station
- Suitable for mobile observation and short-distance transfer workflows
Specification Highlights
- Weight: 600 g referenced by source page
- Interface: touchscreen
- Docking: charging station referenced by source page
- Monitoring parameters depend on the configured version and accessories
Clinical Applications
- Patient transport
- Ambulatory areas
- Emergency departments
- Short-stay observation
Procurement / Configuration Notes
- Final parameters, accessories, modules, software options and consumables may vary depending on configuration.
- Please confirm the required patient category, department, mounting method, monitoring modules, cables, probes and network integration before ordering.
- For anaesthesia and infusion equipment, confirm gas, power, safety, accessory and clinical protocol requirements before purchase.