Ecosy 630 Infant Warmer

BT-550 Infant Warmer

The BT-550 Infant Warmer is an electrically powered neonatal radiant warmer designed to help maintain the thermal balance of newborns, premature infants and low-birth-weight babies through controlled infrared radiant heating.

It is suitable for newborn care areas, delivery rooms, neonatal units, maternity wards and emergency newborn care environments. The system provides servo baby mode, manual mode and pre-warm mode, allowing clinical staff to select the appropriate heating mode according to the infant’s condition and care requirements.

The BT-550 features a swivel heating head, built-in X-ray tray, APGAR timer, skin temperature monitoring, LCD display, examination lamp, removable sidewalls and optional accessories such as a motor-driven height-adjustable stand, weighing scale, IV pole, IV plate, basket and SpO2 module depending on configuration.

Key Features

• Radiant infant warmer for newborn, premature and low-birth-weight infants
• Servo baby mode, manual mode and pre-warm mode
• Microprocessor-controlled operation
• Infrared radiant heating system
• 600 W infrared heater output power
• Skin temperature monitoring with dual skin temperature sensors
• Skin control range from 34°C to 38°C in baby mode
• 7-inch TFT colour LCD display
• Swivel heating head rotates 90° left and right
• Built-in X-ray tray for imaging support
• APGAR timer with 1, 5 and 10 minute beep indication
• LED examination lamp with 3 brightness levels
• Visual and audible alarms
• Easy-access removable sidewalls for cleaning
• Bouncy mattress for stable infant positioning
• Optional motor-driven lift stand
• Optional weighing scale
• Optional IV pole, IV plate and basket
• Optional SpO2 module and SpO2 sensor extension
• RS232C PC interface

Intended Patient Population

Product Overview

Heating and Temperature Control

Physical Characteristics

Functions and Controls

Examination Lamp

Alarm System

Optional / Configuration-Dependent Accessories

IV Plate

IV Pole

Weighing Scale

Basket / Drawer

Power Requirements

Environmental Conditions

Delivery Accessories

Clinical and Workflow Benefits

The BT-550 is designed to support newborn warming, observation and clinical care while improving access for medical staff. The rotating heater head allows access from either side, while the built-in X-ray tray supports imaging without unnecessary movement of the infant.

The removable sidewalls help simplify cleaning and access, while the APGAR timer supports newborn assessment workflow. Optional accessories such as the IV pole, IV plate, basket, weighing scale and SpO2 module allow the warmer to be configured according to department needs.

Important Safety Note

The skin temperature sensor must remain in direct contact with the infant’s skin during servo temperature control. Incorrect sensor attachment may affect temperature monitoring and can increase the risk of overheating. Clinical staff should routinely check the infant’s condition, confirm correct sensor placement and assess the infant’s skin during use.

Why Choose the BT-550 Infant Warmer?

The BT-550 Infant Warmer is a practical neonatal radiant warmer for healthcare facilities requiring reliable infant warming, temperature monitoring, APGAR timing, examination lighting and X-ray access in one system.

Its pre-warm, baby/servo and manual modes allow flexible thermal care, while its optional accessories support use across delivery rooms, neonatal units and newborn care areas.

Suitable For

• Delivery rooms
• Neonatal units
• Newborn care areas
• Maternity hospitals
• Obstetric departments
• Paediatric departments
• Private hospitals
• Emergency newborn care areas
• Premature and low-birth-weight infant care areas

Ordering Information

Available configurations may vary depending on lift stand, IV pole, IV plate, basket, weighing scale, SpO2 module, resuscitation oxygen supply module and other accessories.

Please contact Nass Ventures for pricing, configuration advice, delivery, installation support and after-sales service.

Important: Some accessories and modules may be optional or configuration-dependent. Please confirm the exact package, included accessories and technical configuration before ordering.

Comen BQ80 Infant Radiant Warmer

The Comen BQ80 is a comprehensive neonatal nursing platform designed to support newborn warming, resuscitation, monitoring and jaundice treatment in one integrated system. Built for delivery rooms, neonatal units, maternity departments and newborn care areas, the BQ80 helps clinical teams provide organised, responsive and efficient care for newborn infants.

The system combines radiant warming, neonatal monitoring, resuscitation support and phototherapy functions into a single care platform. Its design helps reduce the need for multiple separate devices around the infant, supporting faster clinical response and a more streamlined workflow during newborn care and emergency intervention.

The BQ80 includes far infrared ceramic heating technology, a thermal conduction gel mattress, APGAR timer, T-piece resuscitation support, specialised neonatal monitoring, blue-light phototherapy, integrated electronic weighing scale and ergonomic features designed to improve usability for medical staff.

Key Features

• 4-in-1 neonatal nursing platform
• Designed for newborn warming, monitoring, resuscitation and jaundice treatment
• Far infrared ceramic heating tube
• Double heating tube design for faster and more even warming
• High-accuracy dual thermistor temperature sensor
• Thermal conduction gel mattress
• Integrated T-piece resuscitation support
• APGAR score timer
• Specialised neonatal monitoring system
• Masimo SET neonatal blood oxygen technology
• Neonatal ECG and respiration monitoring support
• Adap-DSP blood pressure processing technology
• Patented neonatal apnea self-rescue technology
• Natural blue light phototherapy for jaundice treatment
• CREE high-brightness LED chips
• MIX-light system combining blue and white light
• 10.4-inch colour LCD touchscreen
• Self-adaptive screen brightness adjustment
• Hands-free alarm silence function
• 360° visible alarm indicator
• Built-in X-ray film box
• Integrated electronic scale
• LED puncture lamp with three brightness levels
• Rotary lamp for flexible positioning
• Humanised damping door to reduce noise
• Designed for efficient newborn care and clinical workflow

Product Overview

Clinical Applications

4-in-1 Neonatal Care Platform

The BQ80 is designed to combine four important neonatal care functions in one system. This helps clinical staff manage different stages of newborn care without relying on multiple separate devices.

Heating and Comfort

The BQ80 uses a far infrared ceramic heating tube system designed to provide consistent warmth for newborn care. The double heating tube design helps distribute warmth across the bed surface, including when the mattress is tilted.

The thermal conduction gel mattress is made from environmentally friendly silicon gel. It is described as soft, comfortable, easy to clean and disinfect, with good thermal performance.

Resuscitation and Respiratory Support

The BQ80 includes a T-piece system designed to support newborn resuscitation and respiratory care. It supports ventilation management, negative pressure sputum suction, positive pressure resuscitation and oxygen therapy.

The system is designed to deliver stable and controllable PIP and PEEP, supporting clinical management of functional residual capacity and lung compliance during resuscitation workflow.

Neonatal Monitoring System

The BQ80 is described as including a specialised neonatal monitoring system that allows real-time monitoring of vital signs and waveforms during resuscitation, reducing the need for a separate patient monitor in the listed configuration.

Jaundice Treatment

The BQ80 includes blue-light phototherapy for neonatal jaundice treatment. It uses CREE high-brightness LED chips and a MIX-light system that combines blue and white light beams through multiple reflections.

The phototherapy system provides an effective wavelength range of 430–490 nm and light energy up to 45 μW/cm²/nm. A three-position switch allows adjustment between high, medium and low output.

Display and User Interface

The BQ80 features a 10.4-inch colour LCD touchscreen designed to display neonatal waveforms and data centrally. The self-adaptive brightness system adjusts the screen according to ambient light, helping improve visibility and usability in different clinical lighting conditions.

Workflow and Ergonomic Design

The BQ80 is designed to simplify operation and improve efficiency in neonatal care. Features such as the hands-free alarm silence, damping door, rotary lamp, built-in X-ray film box and integrated scale help reduce unnecessary handling and support smoother workflow.

X-ray and Procedure Support

The BQ80 includes a built-in X-ray film box located under the crib. This allows imaging support without unnecessary movement of the newborn. The LED puncture lamp provides high-intensity light with three adjustable brightness settings.

Integrated Electronic Scale

The integrated electronic scale allows newborn weight measurement without needing a separate weighing device. This supports growth monitoring and can help reduce unnecessary disturbance to the infant.

Why Choose the Comen BQ80?

The Comen BQ80 is designed for clinical environments that need more than a standard infant warmer. By integrating radiant warming, neonatal monitoring, T-piece resuscitation support and phototherapy into one platform, it helps create a more organised neonatal care workspace.

Its heating system, gel mattress, central touchscreen, integrated monitoring, X-ray film box, electronic scale and ergonomic alarm features make it suitable for departments that require fast response, careful observation and efficient newborn care.

Suitable For

• Delivery rooms
• Neonatal intensive care units
• Newborn care areas
• Maternity hospitals
• Obstetric departments
• Paediatric departments
• Private hospitals
• Specialist neonatal care centres
• Emergency newborn care areas

Ordering Information

Available configurations may vary depending on monitoring package, resuscitation setup, phototherapy configuration, accessories and local supply package.

Please contact Nass Ventures for pricing, delivery, installation support, training and after-sales service.

Important: Some features and accessories may be configuration-dependent. Please confirm the exact specification, included modules, monitoring package, resuscitation system, phototherapy setup, scale and X-ray support before ordering.

Ecosy 930 Radiant Infant Warmer

The Ecosy 930 Radiant Infant Warmer is a comprehensive neonatal care platform designed to provide controlled warmth, monitoring support and clinical access for newborn infants. It is suitable for delivery rooms, neonatal units, maternity departments and newborn care areas where safe thermal support, observation and emergency readiness are required.

With servo baby mode, manual mode and preheating mode, the Ecosy 930 allows clinical staff to manage newborn temperature according to the care situation. The system includes a 10.4-inch LCD touchscreen, adjustable examination lighting, bed tilt adjustment, APGAR and CPR timer functions, integrated weighing scale and optional support modules depending on configuration.

Its design combines radiant warming, clinical monitoring, X-ray cassette access, storage, height adjustment and emergency support features in one practical infant warmer platform.

Key Features

• Radiant infant warmer for newborn care
• Suitable for delivery rooms, neonatal units and maternity departments
• Servo baby mode, manual mode and preheating mode
• 500 W heater capacity
• Skin temperature setting range from 34.0°C to 38.0°C
• 10.4-inch LCD touchscreen display
• Heater output adjustable from 0% to 100%
• APGAR and CPR timer modes
• Adjustable LED examination lighting
• Bed tray tilt adjustment up to ±13°
• Mattress surface size 500 x 700 x 25 mm
• Canopy horizontal rotation range up to 320°
• Integrated weighing scale with 300 g to 8000 g weighing range
• X-ray cassette drawer
• Height adjustment up to 30 cm
• Pulse oximeter unit, depending on configuration
• Resuscitation and suction units, depending on configuration
• Storage drawer for accessories and clinical supplies

Product Overview

Clinical Applications

Temperature and Heating Specifications

Display and Control

Examination Lighting

Bed Tray and Mattress

Dimensions and Weight

Integrated Weighing Scale

Storage Drawer

Pulse Oximeter Unit

Resuscitation Unit

Suction Unit

Storage and Shipping Conditions

Comfort and Workflow Features

The Ecosy 930 is designed to support both newborn comfort and clinical workflow. Transparent side panels allow staff to observe the infant clearly, while the tilting bed tray supports positioning during care. The height-adjustable frame helps staff work at a comfortable level, and the integrated scale reduces the need to move the infant for routine weighing.

Optional and Configuration-Dependent Features

Depending on the selected package, the Ecosy 930 may be supplied with additional modules and accessories.

Why Choose the Ecosy 930?

The Ecosy 930 is a practical neonatal care platform for healthcare facilities that require radiant warming, newborn monitoring support, weighing, positioning and emergency readiness in one unit. Its 10.4-inch touchscreen, servo/manual/preheating modes, integrated scale, APGAR/CPR timer functions and optional clinical modules make it suitable for modern maternity and neonatal care environments.

By combining warming, observation, weighing, X-ray cassette access and optional respiratory support functions, the Ecosy 930 helps clinical teams provide organised and efficient newborn care.

Suitable For

• Delivery rooms
• Neonatal units
• Newborn care areas
• Maternity hospitals
• Obstetric departments
• Paediatric departments
• Private hospitals
• Specialist neonatal care centres
• Emergency newborn care areas

Ordering Information

Available configurations may vary depending on power requirement, pulse oximeter module, resuscitation unit, suction unit, phototherapy lamp, mattress type, infusion stand and accessory package.

Please contact Nass Ventures for pricing, configuration advice, delivery, installation support and after-sales service.

Important: Pulse oximeter, resuscitation unit, suction unit, LED phototherapy lamp, thermal gel mattress, infusion poles and other accessories may be optional or configuration-dependent. Please confirm the exact package before ordering.

TSE NATALLY RW-610 Radiant Infant Warmer with Integrated Weighing Scale

The TSE NATALLY RW-610 is a radiant infant warmer designed for newborn care in delivery rooms, neonatal units and intensive care environments. It provides controlled radiant warming for newborns immediately after delivery and during subsequent neonatal care.

The system supports preheating mode, manual mode and body temperature mode, helping clinical staff provide thermal support according to the needs of the newborn. It is designed with a positionable 9-inch colour LCD monitor, integrated weighing scale, electrical bed tilting and emitter rotation to both sides for improved clinical access.

Depending on the selected configuration, the NATALLY RW-610 may also be supplied with a height-adjustable chassis, Masimo vital signs monitoring, phototherapeutic module and additional accessories.

Key Features

• Radiant infant warmer for newborn care
• Suitable for delivery rooms and neonatal intensive care environments
• Preheating mode, manual mode and body temperature mode
• Positionable 9-inch colour LCD monitor
• Integrated weighing scale
• Electrical bed tilting
• 90° emitter rotation to both sides
• APGAR score timer mode
• Height-adjustable chassis with two-side control, depending on configuration
• Masimo vital signs monitoring, depending on configuration
• Phototherapeutic module, depending on configuration
• Wide selection of accessories available
• Compact design suitable for neonatal and obstetric departments

Product Overview

Clinical Applications

Main Operating Modes

Technical Specifications

APGAR Score Mode

Integrated Weighing Scale

Design and Workflow Features

Comfort and Safety Features

The TSE NATALLY RW-610 is designed to support newborn thermal care while improving access for clinical staff. The integrated scale reduces unnecessary newborn transfers for weighing, while the electric bed positioning and rotating emitter support practical access during examinations and procedures.

Depending on the selected package, the system can also be configured with additional modules such as Masimo vital signs monitoring and a phototherapeutic module.

Why Choose the TSE NATALLY RW-610?

The TSE NATALLY RW-610 is a practical neonatal care platform for hospitals and maternity departments that need radiant warming, newborn weighing, patient positioning and optional monitoring in one system.

Its positionable 9-inch colour LCD monitor, integrated weighing scale, electrical bed tilting and rotating emitter support efficient care in delivery rooms and neonatal units. With optional configuration features such as height-adjustable chassis, Masimo vital signs monitoring and phototherapeutic module, the RW-610 can be adapted to different clinical requirements.

Suitable For

• Delivery rooms
• Neonatal intensive care units
• Newborn care units
• Maternity hospitals
• Obstetric departments
• Paediatric departments
• Private hospitals
• Specialist neonatal care centres

Ordering Information

Available configurations may vary depending on chassis type, Masimo monitoring, phototherapeutic module and accessory package. Please contact Nass Ventures for pricing, configuration advice, delivery, installation support and after-sales service.

Important: Height-adjustable chassis, Masimo vital signs monitoring, phototherapeutic module and accessories may be optional or configuration-dependent. Please confirm the exact configuration before ordering.