Labbox VOLT E600 Electrophoresis Power Supply
Share
Labbox VOLT E600 Electrophoresis Power Supply
Electrophoresis and blotting power supply with a 4.3-inch touchscreen, constant voltage, current or power modes, and outputs up to 600 V, 600 mA and 360 W.
The VOLT E600 supplies controlled electrical output for compatible gel electrophoresis and transfer systems. Four pairs of output sockets support simultaneous connection of up to four systems within the power supply’s combined output limits.
Key features
Three control modes
Select constant voltage, constant current or constant power. Automatic mode adjustment operates according to the set parameters.
Touchscreen programming
A 4.3-inch colour touchscreen supports monitoring and programming, with storage for 20 programmes of up to 20 steps each.
Protection functions
Short-circuit and no-load protection are incorporated. Power-failure recovery can be enabled in settings; it is not always active.
Bench arrangement
A stackable enclosure with adjustable feet supports laboratory bench organisation. Additional units shown in a stacking image are separate.
Technical specifications
| Model / range | VOLT E600 |
|---|---|
| Supplier reference / MPN | ELFP-60L-001 |
| Output voltage | 0–600 V |
| Output current | 0–600 mA |
| Output power | 0–360 W |
| Output connections | 4 pairs; up to 4 connected systems within the combined output ratings |
| Operating modes | Constant voltage, current or power |
| Setting resolution | 1 V; 1 mA; 1 W |
| Display | 4.3-inch colour LCD touchscreen |
| Programme storage | 20 programmes; up to 20 steps per programme |
| Timer range | 1 minute to 99 h 59 min |
| Protection functions | Short-circuit and no-load protection |
| Power-failure recovery | Configurable; disabled by default in the manufacturer manual |
| Mains input, manual specification | 100–120 V or 200–240 V; 50/60 Hz. Confirm regional unit rating and power cord before ordering |
| Dimensions, L × W × H | 310 × 260 × 115 mm |
| Net equipment weight | 1.96 kg; not a shipping weight |
| Operating temperature | 0–40 °C |
| Operating humidity | ≤95% relative humidity |
| Manufacturer warranty | 24 months under normal use and service; manufacturer exclusions apply |
Supply and accessories
One VOLT E600 power supply, one power cord and one certificate of conformity, as listed in the manufacturer manual. Confirm the required regional mains rating and plug. Electrophoresis tanks, transfer systems, connection leads and additional power supplies are separate unless specified in the quotation.
Operation and compatibility
Select connected equipment that is compatible with the output range and connector arrangement. Consider the combined voltage, current and power requirements when connecting multiple systems. Follow the manufacturer’s installation and operating instructions, maintain ventilation clearance and keep buffers away from the power supply.
Ordering information
Provide the model or reference ELFP-60L-001, quantity, delivery location and intended application. Include the required gel format, sample capacity, existing equipment and any accessories, consumables, installation, training or maintenance requirements relevant to your order.
Delivery, spares and service
Contact Nass Ventures to confirm availability, delivery arrangements, compatible spares and service requirements. The quotation will define the final supplied configuration.
Shipment
Benefit from reliable delivery options
Every day, we ship our laboratory equipment throughout Nigeria and internationally. We work with trusted and experienced logistics and courier partners to ensure safe and timely delivery. Shipping costs and delivery times depend on the items ordered and the recipient’s location. Alternatively, you may arrange to collect your order in person by appointment. Below is an overview of our shipping options and policies.
Shipping within Nigeria
All goods are insured as standard up to a value of ₦ equivalent of €25,000. Shipping costs are calculated based on the weight, dimensions, value of the shipment, and delivery destination within Nigeria. For detailed shipping information, please contact us directly—we will be happy to assist.
International shipping
For accurate international shipping costs, we require details of the specific product(s) you wish to order.
Please contact us by telephone or email for a tailored quotation.
Freight forwarding, sea or air freight
For large, heavy, or specialized equipment, we provide personalised quotations for road freight, sea freight, or air freight. Taking current logistics conditions into account, we aim to offer the best possible price-to-performance ratio.
Incoterms 2020
All shipments are handled in accordance with Incoterms® 2020 (ICC). Please contact us to confirm and agree on your preferred delivery terms.
Self-collection
If required, you may collect your goods in person by prior appointment. Please note that pricing and availability may vary between Nigeria and other countries.
Standard deliveries
Standard shipments within Nigeria are handled by reputable courier and logistics providers. Upon request, we can also arrange alternative carriers to meet specific delivery requirements.
Insurance
All deliveries are insured up to a maximum value of ₦ equivalent of €25,000. If the value of your goods exceeds this amount, we will contact you to arrange additional insurance coverage.
Delivery time
Delivery times depend on product availability and order volume. High-demand items may be subject to delays beyond our control. If you require urgent delivery, please inform us in advance, and we will do our best to accommodate your request.
Q: Saves time
A: This reason might be the most obvious, but it’s a clear benefit of an FAQ page. Not only does the FAQ page save customers time, but it also saves employees time as well. Having an FAQ page ensures customers don’t have to sit on the phone for hours waiting for simple answers, and employees don’t have to individually answer all questions.
Q: Earns trust
A: Information is available at the click of a button, but as we all know, information is not always true. Because of this, customers are more skeptical than ever before. They hunt for products by sifting through reviews, looking at the product on multiple websites, and doing price checking across the internet.
Q: Provides new insights
A: It’s difficult to get into the head of a shopper. Some buy on impulse, and others buy after thorough research. By tracking the clicks on your FAQ page, you can gather insights about your product or service that you didn’t know before. You can then inform your product team of these insights. From there, the product team can make changes to improve the product or experience.
Q: Drives internal page views
A: If you want your FAQ to be extremely thorough, which it should be, you can link to resources within your FAQ for your customers to find out more information. Whether you link to a blog that goes into more detail or a product page, this content helps the shoppers get the full story before making a purchase.
A: Prevents negative reviews
A: When looking through negative reviews, there’s almost always one thing in common: the problem could’ve been avoided.
Related Products
Labbox LABKEM Agarose MS-4 GEN, 100 g
Agarose MS-4 GEN for fine-resolution and protein electrophoresis, supplied in a 100 g plastic bottle, with EEO ≤0.12 and specified storage at 2–25 °C.
LABKEM Agarose MS-4 GEN is a white-to-cream powder for laboratory electrophoresis. Its low gel-point specification and defined electroendosmosis support selection for a validated gel protocol.
Key features
Electrophoresis applications
The supplier lists fine-resolution and protein electrophoresis applications.
EEO ≤0.12
The manufacturer specifies the maximum electroendosmosis value.
Thermal specifications
At 3%, the gel point is ≤31 °C and the melting point is ≤76 °C.
100 g bottle
One plastic bottle; supplier-designated thermosensitive product with specified storage at 2–25 °C.
Technical specifications
| Brand / range | LABKEM |
|---|---|
| Reference | AGAR-MS4-100 |
| Grade | GEN; MS-4 |
| CAS number | 9012-36-6 |
| EC number | 232-658-1 |
| Appearance | White-to-cream powder |
| Transparency at 3% | ≤6 NTU |
| pH in solution, linked export specification | 6.4–6.98; confirm lot specification |
| pH in gel, linked export specification | 6.4–7.5; confirm lot specification |
| Residue on calcination | ≤0.3% |
| Sulphates, SO₄ | ≤0.11% |
| Gel strength at 3%, linked export specification | ≥500 g/cm as printed; confirm unit and test method |
| Gel strength at 5%, linked export specification | ≥1000 g/cm as printed; confirm unit and test method |
| Melting point at 3% | ≤76 °C |
| Gel point at 3% | ≤31 °C |
| Particle size, mesh 60 ASTM | 0.3–1.0%, manufacturer specification; test interpretation to be confirmed |
| Particle size, mesh 100 ASTM | 5.0–10.0%, manufacturer specification; test interpretation to be confirmed |
| EEO, electroendosmosis | ≤0.12 |
| Storage, product specification | 2–25 °C |
| Handling designation | Thermosensitive |
| Pack | 100 g; 1 plastic bottle |
Supply and accessories
One 100 g plastic bottle of Agarose MS-4 GEN. Request the batch certificate of analysis and current safety data sheet to confirm the applicable pH limits and gel-strength test method. Confirm temperature-sensitive delivery arrangements with Nass Ventures; a refrigerated shipping requirement is not specified in the supplied material.
Handling and compatibility
For trained laboratory users. Store at the product specification temperature of 2–25 °C and away from heat. Follow the safety data sheet and validated gel preparation protocol, using suitable protective equipment for handling powder and hot solutions.
Ordering information
Provide the product reference, selected variant, quantity, delivery location and intended use. Include the required pack size or configuration, existing equipment, accessories and consumables, and any installation, training or maintenance requirements relevant to your order.
Delivery, spares and service
Contact Nass Ventures to confirm availability, delivery arrangements, compatible spares and service requirements. The quotation will define the final supplied configuration and documentation.
Labbox LABKEM Acrylamide GEN, 1 kg
GEN-grade acrylamide for laboratory electrophoresis, supplied in a 1 kg plastic bottle, with assay ≥99.9% and defined impurity limits.
LABKEM Acrylamide GEN is a laboratory reagent for electrophoresis applications. The manufacturer specifies high assay and limits for water, acrylic acid and water-insoluble substances.
Key features
GEN grade
Specified for electrophoresis applications.
Assay ≥99.9%
The manufacturer specification sheet defines the minimum assay.
Controlled impurities
Limits are stated for water, acrylic acid and substances insoluble in water.
1 kg laboratory pack
One plastic bottle per orderable reference; for trained professional laboratory users.
Technical specifications
| Brand / range | LABKEM |
|---|---|
| Reference | ACAD-00B-1K0 |
| Grade | GEN |
| Chemical formula | H₂C=CHCONH₂ |
| Molecular weight | 71.08 g/mol |
| CAS number | 79-06-1 |
| EC number | 201-173-7 |
| EC index number | 616-003-00-0 |
| Assay | ≥99.9% |
| Substances insoluble in water | ≤0.05% |
| Acrylic acid | ≤0.001% |
| Water | ≤0.1% |
| Pack | 1 kg; 1 plastic bottle |
| SDS signal word | Danger |
| Hazard statements | H340, H350, H301, H312, H332, H315, H317, H319, H361f, H372 |
| Principal hazards | May cause cancer and genetic defects; toxic if swallowed; suspected of damaging fertility; repeated exposure can damage organs. Also harmful by skin contact or inhalation, with skin and eye irritation and sensitisation hazards. |
| Transport classification, manufacturer SDS | UN 2074, Acrylamide, solid; class 6.1; packing group III |
| Storage | Original closed container in a cool, well-ventilated place, away from combustible materials, heat and direct sunlight |
Supply and accessories
One 1 kg plastic bottle of Acrylamide GEN. Request the current safety data sheet and batch certificate of analysis. Confirm dangerous-goods delivery arrangements and charges for the delivery location with Nass Ventures before ordering; buffer components and other electrophoresis reagents are separate.
Handling and compatibility
For trained and experienced laboratory users. Review the current safety data sheet before handling, use appropriate ventilation and the specified protective equipment, and follow the laboratory chemical risk assessment and disposal procedures. This product is supplied for professional laboratory use.
Ordering information
Provide the product reference, selected variant, quantity, delivery location and intended use. Include the required pack size or configuration, existing equipment, accessories and consumables, and any installation, training or maintenance requirements relevant to your order.
Delivery, spares and service
Contact Nass Ventures to confirm availability, delivery arrangements, compatible spares and service requirements. The quotation will define the final supplied configuration and documentation.
Labbox ELITEX VOLT TX90 Protein Transfer System
VOLT TX90 protein-transfer system compatible with VOLT VX80, in two- or four-gel models for 83 × 73 mm gels, with an integrated blue cooling module.
The VOLT TX90 provides two orderable gel-capacity options with the same 90 × 110 mm transfer area. Its high-strength polycarbonate structure combines high-purity platinum electrodes with a blue cooling module.
Key features
Two capacity options
ELFT-X90-001 accepts one or two gels; ELFT-X94-001 accepts one to four gels.
Integrated cooling module
A blue cooling module is incorporated into the manufacturer-described transfer system.
Gel assembly accessories
An anti-bubble roller and easy-open gel cassettes are included.
VOLT VX80 compatibility
Specify the existing VX80 system and required workload when selecting the transfer model.
Technical specifications
| Brand / range | ELITEX |
|---|---|
| Compatible system | VOLT VX80 |
| Transfer area | 90 × 110 mm, both references |
| Gel size | 83 × 73 mm |
| ELFT-X90-001 capacity | 1–2 gels |
| ELFT-X94-001 capacity | 1–4 gels |
| Construction | High-strength polycarbonate |
| Electrode material | High-purity platinum; exact purity not stated |
| Electrode spacing, supplier specification | 4 / 5.5 cm; reference-specific mapping requires confirmation |
| Cooling | Integrated blue cooling module |
| Included assembly accessories | Anti-bubble roller and easy-open gel cassettes |
| Pack quantity | 1 selected transfer system |
Available variants
| Reference | Variant |
|---|---|
| ELFT-X90-001 | Up to 2 gels — ELFT-X90-001; 90 × 110 mm transfer area; gels 83 × 73 mm |
| ELFT-X94-001 | Up to 4 gels — ELFT-X94-001; 90 × 110 mm transfer area; gels 83 × 73 mm |
Supply and accessories
One selected VOLT TX90 transfer system with integrated blue cooling module, anti-bubble roller and easy-open gel cassettes. Confirm the included tank, lid, leads and cassette quantities for the selected reference. The photograph shows ELFT-X90-001, the two-gel model. Power supply, membranes, filter paper and transfer reagents are separate unless specified.
Handling and compatibility
Confirm compatibility with VOLT VX80, gel size and required gel capacity before ordering. Follow the manufacturer instructions for cassette assembly, removal of trapped air, polarity and cooling. Switch off and disconnect the power supply before opening or handling the system.
Ordering information
Provide the product reference, selected variant, quantity, delivery location and intended use. Include the required pack size or configuration, existing equipment, accessories and consumables, and any installation, training or maintenance requirements relevant to your order.
Delivery, spares and service
Contact Nass Ventures to confirm availability, delivery arrangements, compatible spares and service requirements. The quotation will define the final supplied configuration and documentation.
Labbox ELITEX VOLT T90 Protein Transfer System
VOLT T90 transfer system compatible with VOLT V80, for one or two gels up to 83 × 73 mm. Includes gel cassette and a cooling arrangement.
The VOLT T90 provides a 90 × 110 mm transfer area for compatible laboratory protein-transfer workflows. Its transparent polycarbonate construction and platinum electrodes support use with the VOLT V80 system.
Key features
One or two gels
Designed for simultaneous transfer of up to two gels, each no larger than 83 × 73 mm.
Transparent polycarbonate
Impact-resistant construction permits visual inspection of the transfer assembly.
Platinum electrodes
99.99% platinum electrodes are specified with 4 cm separation.
Cooling arrangement
Supplied with a gel cassette and cooling system described by the manufacturer as using ice or a blue cooling module.
Technical specifications
| Brand / range | ELITEX |
|---|---|
| Reference | ELFT-T90-001 |
| Compatible system | VOLT V80 |
| Transfer area | 90 × 110 mm |
| Gel capacity | 1–2 gels |
| Maximum gel size | 83 × 73 mm |
| Construction | Impact-resistant transparent polycarbonate |
| Electrode material | 99.99% platinum |
| Electrode spacing | 4 cm |
| Cooling | Ice or blue cooling module, manufacturer description; confirm supplied arrangement |
| Pack quantity | 1 transfer system |
Supply and accessories
One VOLT T90 transfer system with gel cassette and cooling arrangement. Confirm the tank, lid, leads and cooling components included in the quoted configuration. The supplier photograph illustrates the transfer setup. External power supply, membranes, filter paper, gels and transfer buffers are separate unless stated in the quotation.
Handling and compatibility
Confirm compatibility with the existing VOLT V80 and the intended gel size before ordering. Follow the instructions for polarity, cassette assembly and cooling. Disconnect the electrophoresis power supply before opening or handling the system.
Ordering information
Provide the product reference, selected variant, quantity, delivery location and intended use. Include the required pack size or configuration, existing equipment, accessories and consumables, and any installation, training or maintenance requirements relevant to your order.
Delivery, spares and service
Contact Nass Ventures to confirm availability, delivery arrangements, compatible spares and service requirements. The quotation will define the final supplied configuration and documentation.
Labbox LBX Blue Light LED Transilluminator, 470 nm
470 nm blue-light LED transilluminator with a 210 × 120 mm viewing area, adjustable intensity, amber filter and mini darkroom for compatible stained gels.
The LBX blue-light transilluminator provides illumination from below for viewing and cutting compatible DNA and RNA gels. An adjustable amber filter supports observation, while the included mini darkroom assists viewing and photography.
Key features
470 nm blue LEDs
Check that the selected fluorescent stain responds to blue-light excitation.
Adjustable amber filter
The foldable filter can be angled for viewing and gel-band cutting.
Intensity control
Light intensity can be adjusted and remembered; continuous illumination shuts off automatically after five minutes.
Viewing and cutting accessories
Supplied with a mini darkroom, gel-cutting knife handle and six matching blades according to the manual packing list.
Technical specifications
| Brand / range | LBX instruments |
|---|---|
| Reference | TRLM-BLB-001 |
| Viewing area, L × W | 210 × 120 mm |
| Dimensions, L × W × H | 265 × 195 × 30 mm |
| Maximum emission wavelength | 470 nm |
| Light source | Built-in blue LED module |
| Manufacturer-rated LED life | More than 50,000 hours; manufacturer specification, not a warranty term |
| Light intensity | Adjustable; setting memory |
| Automatic shutdown | After 5 minutes of continuous operation |
| Mains input | 100–240 V AC, 50/60 Hz |
| Power adapter output | 12 V, 1 A |
| Operating temperature | 0–40 °C |
| Maximum installation altitude | 2000 m |
| Clearance from walls / other instruments | At least 100 mm, manufacturer manual |
| Net instrument weight | 1 kg; not a shipping weight |
| Included accessories | Power adapter; mini darkroom; knife handle; 6 matching blades |
| Warranty | Confirm the applicable warranty term in the quotation |
Supply and accessories
One blue-light transilluminator, one power adapter, one mini darkroom, one gel-cutting knife handle and six matching blades. Camera or smartphone, gels and staining reagents are separate. The manual describes using a smartphone with the darkroom for image capture.
Handling and compatibility
Confirm stain excitation and emission requirements before ordering. Manufacturer-listed examples include innoQ, SYBR Safe and GelGreen, subject to the dye protocol. Do not stare into the light source. Use the amber filter and follow the manufacturer safety instructions and laboratory protective-equipment requirements. Keep the instrument dry and disconnect power before cleaning.
Ordering information
Provide the product reference, selected variant, quantity, delivery location and intended use. Include the required pack size or configuration, existing equipment, accessories and consumables, and any installation, training or maintenance requirements relevant to your order.
Delivery, spares and service
Contact Nass Ventures to confirm availability, delivery arrangements, compatible spares and service requirements. The quotation will define the final supplied configuration and documentation.
Labbox LBX Protein Transfer Module, 100 × 100 mm
Protein transfer module for the LBX ELFV-750-001 tank, with a 100 × 100 mm transfer area, two cassettes and four sponge pads. Outer tank and lid are separate.
The LBX transfer module supports protein transfer from polyacrylamide gels. It fits the compatible ELFV-750-001 electrophoresis tank and uses colour coding to help orient the gel during assembly.
Key features
Protein transfer
For transferring proteins from polyacrylamide gels to a suitable membrane.
100 × 100 mm area
The specified transfer area supports selection of the gel and membrane format.
Colour-coded assembly
Colour coding helps identify the required cassette orientation; follow the polarity instructions in the manual.
Supplied components
One transfer core, two polycarbonate cassettes with perforated plates and four sponge pads.
Technical specifications
| Brand / range | LBX instruments |
|---|---|
| Reference | ELFT-001-001 |
| Compatible tank | ELFV-750-001 |
| Transfer area | 100 × 100 mm |
| Module dimensions, L × W × H | 139 × 55 × 105 mm |
| Cassette material | Polycarbonate |
| Cassette construction | Perforated plates |
| Cassette quantity | 2 |
| Sponge pad quantity | 4 |
| Pack quantity | 1 transfer module |
| Outer tank and lid | Not included, manufacturer manual |
| External power supply | Required; separate |
| Manufacturer warranty | 12 months under normal use and service; manufacturer exclusions apply |
Supply and accessories
One transfer core, two cassettes and four sponge pads. The outer tank and lid are explicitly excluded in the manufacturer manual. A compatible ELFV-750-001 tank, external power supply, transfer membrane, filter paper and buffer are required separately.
Handling and compatibility
For qualified laboratory users. Confirm the existing tank reference before ordering. Follow the manufacturer instructions for gel orientation, polarity and temperature control. Disconnect power before handling the system and use the compatible tank only with its safety lid correctly fitted.
Ordering information
Provide the product reference, selected variant, quantity, delivery location and intended use. Include the required pack size or configuration, existing equipment, accessories and consumables, and any installation, training or maintenance requirements relevant to your order.
Delivery, spares and service
Contact Nass Ventures to confirm availability, delivery arrangements, compatible spares and service requirements. The quotation will define the final supplied configuration and documentation.
Labbox LBX Horizontal Electrophoresis System
Acrylic horizontal electrophoresis tanks for DNA and RNA separation in agarose gels, available in 550 ml and 1800 ml formats with gel caster, trays and combs.
The LBX horizontal electrophoresis system provides two tank sizes for different agarose gel formats. One-piece acrylic construction and a transparent lid support routine laboratory separation workflows.
Key features
Two tank formats
Choose the 550 ml or 1800 ml tank with the matching gel trays.
Acrylic construction
The tank is manufactured from acrylic in one piece with a transparent cover.
Lid-mounted connection
Power leads attach to the cover using banana-type plugs; lid removal interrupts the tank’s electrical connection.
Gel preparation components
Gel caster, trays and a set of combs are included for the selected tank.
Technical specifications
| Brand / range | LBX instruments |
|---|---|
| Application | DNA and RNA separation in agarose gels |
| Tank material | Acrylic |
| Cover | Transparent; lid-mounted power leads |
| Connection | Banana-type plugs |
| ELFH-550-001 capacity | 550 ml |
| ELFH-550-001 dimensions, L × W × H | 300 × 165 × 75 mm |
| ELFH-550-001 gel dimensions | 60 × 60, 120 × 60 and 120 × 120 mm |
| ELFH-550-001 comb wells | 1, 2, 3, 6, 8, 11, 13, 18 and 25 wells, manufacturer manual |
| ELFH-1K8-001 capacity | 1800 ml |
| ELFH-1K8-001 dimensions, L × W × H | 397 × 230 × 93 mm |
| ELFH-1K8-001 gel dimensions | 200 × 200, 200 × 150 and 200 × 100 mm |
| ELFH-1K8-001 comb wells | 17, 22, 36 and 44 wells, manufacturer manual |
| Pack quantity | 1 selected system |
| External power supply | Required; separate supply |
| Manufacturer warranty | 12 months under normal use and service; manufacturer exclusions apply |
Available variants
| Reference | Variant |
|---|---|
| ELFH-550-001 | 550 ml — ELFH-550-001 |
| ELFH-1K8-001 | 1800 ml — ELFH-1K8-001 |
Supply and accessories
One selected tank with gel caster, gel trays and comb set. Confirm the required comb thickness and configuration. A compatible electrophoresis power supply, agarose, buffers, stains and imaging equipment are separate.
Handling and compatibility
Choose the tank, gel format and comb arrangement for the intended sample workload. Follow the rating on the actual unit and the manufacturer manual. Switch off and disconnect the power supply before removing the lid or handling the tank.
Ordering information
Provide the product reference, selected variant, quantity, delivery location and intended use. Include the required pack size or configuration, existing equipment, accessories and consumables, and any installation, training or maintenance requirements relevant to your order.
Delivery, spares and service
Contact Nass Ventures to confirm availability, delivery arrangements, compatible spares and service requirements. The quotation will define the final supplied configuration and documentation.
