Autoclaves for Lifescience

Heidolph Tuttnauer Small Stainess Steel Wire Basket 5075ELVC

For use in 5075ELVL

Heidolph Tuttnauer Printer Paper 5/pk

Package of 5 rolls printer paper, for EP models

Heidolph Tuttnauer Manual Analog Autoclave 3870M, 230V

The 3870M sterilizer has a chamber size with a diameter of 15 inches and a depth of 27 inches. This unit requires single phase, 230 V power and comes standard with an autoclave stand, 2 SS trays, a boost transformer to boost 208 V to 230 V, and a NEMA 6-15 plug.

Product Parameters

Heidolph Tuttnauer Manual Analog Autoclave 2540M, 120V

The 2540M sterilizer has a chamber size with a diameter of 10 inches and a depth of 18 inches. This unit requires 120 V power, and comes with 4 SS trays.

Product Parameters

Heidolph Tuttnauer Manual Analog Autoclave 2340M, 120V

The 2340M model sterilizer has a chamber size with a diameter of 9 inches and a depth of 18 inches. This unit requires 120 V power, and comes standard with 3 SS trays.

Product Parameters

Heidolph Tuttnauer Manual Analog Autoclave 1730M, 120V

The 1730M sterilizer has a chamber size with a diameter of 7 inches and a depth of 12 inches.

This unit requires 120 V power, and comes standard with 3 SS trays.

Product Parameters

Heidolph Tuttnauer Large Stainless Steel Wire Basket 3850/70 ELV

For use in 3870ELV

Heidolph Tuttnauer Large Stainless Steel Solid Basket 3850/70ELV

For use in 3870ELV

Heidolph Tuttnauer Lab Line Vertical Autoclave 5075ELVC

The 5075ELVC model sterilizer comes with a 50cm chamber diameter size with a depth of 75cm.

The unit comes standard with an internal thermometer, water sensing electrode, external pressure gauge and a printer.

This unit runs at 3-phase 230V and comes with a set of 2 large wire baskets.

Compressed air can be connected to this unit to use its cooling function.

Product Parameters

Heidolph Tuttnauer Lab Line Vertical Autoclave 3870ELV

The 3870ELV model sterilizer comes with a 38cm chamber diameter size with a depth of 70cm.

The unit comes standard with an internal thermometer, water sensing electrode, external pressure gauge and a printer.

This unit runs at 3-phase 230V and comes with a set of 2 large wire baskets.

Product Parameters

Heidolph Tuttnauer Lab Line Vertical Autoclave 2840ELV

The 2840ELV model sterilizer comes with a 28cm chamber diameter size with a depth of 46cm.

The unit comes standard with an internal thermometer, water sensing electrode, external pressure gauge and a printer.

This unit runs at single phase 230V and comes with a set of 2 small wire baskets.

Product Parameters

Heidolph Tuttnauer Lab Line Standing Autoclave 5075ELC-PVG-P - 230V

Designed to autoclave everything in your lab, including liquids, this unit has a built-in steam generator for faster heat-up times. With two integrated temperature probes for complete sterilization of liquids, cooling coils to decrease cooling time up to 75%, and temperature selection from 150°C - 137°C (221°F - 279°F). Includes trays and a free printer.

Product Parameters

Heidolph Tuttnauer Lab Line Standing Autoclave 3870ELCPVGP

Designed to autoclave everything in your lab, including liquids, this unit has a built-in steam generator for faster heat-up times. With two integrated temperature probes for complete sterilization of liquids, cooling coils to decrease cooling time up to 75%, and temperature selection from 150°C - 137°C (221°F - 279°F). Includes trays and a free printer.

Product Parameters

Heidolph Tuttnauer Lab Line Standing Autoclave 2840ELC-PVG-P - 230V

Designed to autoclave everything in your lab, including liquids, this unit has a built-in steam generator for faster heat-up times. With two integrated temperature probes for complete sterilization of liquids, cooling coils to decrease cooling time up to 75%, and temperature selection from 150°C - 137°C (221°F - 279°F). Includes trays and a free printer.

Product Parameters

Heidolph Tuttnauer Lab Line Plug & Play Autoclave 5075EL-PV-G-WS - 230V

Designed to autoclave everything in your lab, including liquids, this unit is a plug-and-play with internal reservoirs. No need to connect the autoclave to the building utilities for distilled, tap, or drain water. This unit has a built-in steam generator for faster heat-up times, a water-saving system (use only 5 liters of water a day), and two integrated temperature probes for complete sterilization of liquids. This unit is freestanding with built-in castors for mobility, temperature selection from 105°C - 137°C (221°F - 279°F), and includes trays and a free printer.

Product Parameters

Heidolph Tuttnauer Lab Line Plug & Play Autoclave 3870EL-PV-G-WS - 230V

Designed to autoclave everything in your lab, including liquids, this unit is a plug-and-play with internal reservoirs. No need to connect the autoclave to the building utilities for distilled, tap, or drain water. This unit has a built-in steam generator for faster heat-up times, a water-saving system (use only 5 liters of water a day), and two integrated temperature probes for complete sterilization of liquids. This unit is freestanding with built-in castors for mobility, temperature selection from 105°C - 137°C (221°F - 279°F), and includes trays and a free printer.

Product Parameters

Heidolph Tuttnauer Lab Line Benchtop Autoclave 5075ELP

The 5075EL Laboratory model sterilizer comes with a 19.6 inch chamber diameter size and a depth of 29.5 inches.

The unit comes standard with a printer and is designed specifically for laboratory applications.

This unit runs at 3-phase 230V.

Product Parameters

Heidolph Tuttnauer Lab Line Benchtop Autoclave 3870ELP

The 3870EL Laboratory model sterilizer comes with a 15 inch chamber diameter size and a depth of 27 inches.

The unit comes standard with a printer and is designed specifically for laboratory applications.

This unit runs at 3-phase 230V.

Product Parameters

Heidolph Tuttnauer Lab Line Benchtop Autoclave 3850ELP

The 3850EL Laboratory model sterilizer comes with a 15 inch chamber diameter size and a depth of 20 inches.

The unit comes standard with a printer and is designed specifically for laboratory applications.

This unit runs at 1-phase 230V.

Product Parameters

Heidolph Tuttnauer Lab Line Benchtop Autoclave 2840ELP

The 2840EL Laboratory Mode sterilizer has a chamber size with a diameter of 11 inches and a depth of 15.7 inches.

The unit comes standard a printer and is designed specifically for laboratory applications.

This unit runs at 1 phase 230V.

Product Parameters

Heidolph Tuttnauer Lab Line Autoclave 3950V - 230V

This 60L chamber volume top loading sterilizer features 2 integrated temp probes for complete sterilization of liquids. designed to autoclave everything in your lab including tall bioreactors. This unit comes with four pre-programmed cycles for glass, plastic, liquid A, and liquid B waste. Create up to 20 custom cycles on touch touchscreen operating panel. No water utility connection is needed and built in a condensate tank.

3 Year Warranty

Product Parameters

Heidolph Tuttnauer Electronic Autoclave 3870EAP, 230V

Every stage of the cycle, including water-fill, heating, sterilization, exhaust and drying, are microprocessor-controlled and completely automatic with these electronic models.

The digital display continuously show you temperature, pressure and running time. Four fully adjustable, single-button programs make these sterilizers easy to use and ensure reproducible runs.

The hand battery backup ensures that all parameter setting and controls are retained in the event of a power failure.

The Electronc sterilizer features:

• Sterilization time to 59 minutes
• Temperature selection from 105 to 137 Degrees celcius (221 to 279 Fahrenheit
• In-line particle filter to protect valves
• Electronic pressure and temperature sensors
• Low-water alarm- sounds when reservoir needs to be refilled.
• Standby heating- keeps chamber warm for quicker cycles

Product Parameters

Heidolph Tuttnauer Electronic Autoclave 3850EP, 220V

65L chamber volume steam sterilizer equipped with programmable electronic controls to create custom cycles. The unit automatically recycles water through the chamber and water reservoir. A low water alarm sounds when the reservoir needs to be refilled with mineral-fee water.

15" x 20" chamber which requires no plumbing. 230V, single phase (60 hz) NEMA 6-15 plug

Included with Purchase: Built-in Printer & Autoclave Stand

Product Parameters

Heidolph Tuttnauer Electronic Autoclave 2540ET, 115V

T-Top, a 21L tabletop autoclave boasts the simplicity and fundamentals needed for everyday sterilization. This plug-and-play unit requires no dedicated connections for installation, simply a power source. All units require the reservoir to be filled with mineral-free water and come with 4 trays. An optional thermal printer is available. Ideal for sterilizing glassware, wrapped instruments, and unwrapped instruments. Preventative maintenance is recommended yearly and can be scheduled with Heidolph.

This unit is the replacement for the 2340EP (023210215) and 2540EAP (023210380)

Product Parameters

Heidolph Tuttnauer Electronic Autoclave 2540EKP, 220V

The 2540EPK model sterilizer comes with a 10 inch chamber diameter size with a depth of 18 inches allowing you to fit 4 stainless steel trays.
The Enviornmental model 2540EPK meets EPA guidelines and is perfect for environmental labs. 
In addition to standard features, it includes an accelerated cycle time and a built-in printer for sterilization cycle validation.

Heidolph Tuttnauer Autoclave Printer for 2340E, 2540E & 3870E

For Models 2340E, 2540E, 3850E, and 3870E

This is a NEW model, that is replacing old SKU # 023212005

Dimensions: (L" x W" x H"): 7 x 7 x 7

Benchmark BioClave™ Autoclaves Accessories

Purchase Benchmark BioClave Autoclaves (8L/18L/28L) Here Through MSE Supplies! 

Models

B4000-P :   Printer, 115V 
 B4000-PA :   Paper 2.25"x50 feet, pk. of 3 rolls

Benchmark BioClave™ Autoclaves (8L/18L/28L)

Benchmark Bioclaves™ accommodate a variety of liquids, media, instruments, glassware, plasticware, and other common research laboratory items. Available in 8L, 18L, and 28L chamber volumes, these benchtop models include a mechanical and electrical safety interlock that prevents the door from being opened until the pressure has reached zero PSI.

Digital LCD display and fully automatic operation to commence all segments of the cycle (fill, sterilize, exhaust, and dry) and run to completion by simply pressing the start button.

Temperature can be selected at either 121°C or 134°C, and the sterilization time is fully adjustable.

Purchase Benchmark BioClave Autoclaves Accessories Here Through MSE Supplies! 

Models

B4000-M (8L, 115V)

B4000-M-E (8L, 230V)

B4000-18 (18L, 115V)

B4000-18-E (18L, 230V)

B4000-28-120 (28L, 120V)

B4000-28-220 (28L, 208-240V)

Specifications

Witeg Autoclave WAC-47/60/80 Liter 121°C with Basket

Buy Witeg products from MSE Supplies at the best value.

Description

Ideal for

• biotechnology, clinical, environmental, medical and food industry

Features

Safety electronic door locking system: Sterilizing cycle only starts when the door is locked. Electro-mechanical sensor, magnetic latch, and one-touch open button work together to implement the perfect safety door, which can be opened only when the temperature and pressure has dropped to a safe level inside the pressure vessel.

Special steam condensing mechanism: Hot steam generated by sterilizing cycle is not released out directly. It is condensed into a small amount of water just after the sterilizing cycle by a special condensing mechanism, which protects the user from dangerous high temperature steam.

Lever-type sliding door: Opening and closing the autoclave door is smooth and easy due to the lever-type sliding door.

Liquid & solid cycle mode: Optional operation in liquid and solid cycle mode. During liquid mode the temperature decreases very slow and steam is released step by step, during solid mode the temperature decreases very fast and steam is released directly.

Sterilization cycle data recorder: The WAC-R models come along with a built-in recorder which allows to analyse the process of temperature, pressure, time and error status during the sterilization process.

PED (pressure equipment directive) certification

Devices with 230 V power supply can also be supplied with 120 V on request.

Features

• stainless steel wire basket (2 pcs. included) and pressure vessel
• powder-coated steel body
• top loading sterilizer for loading of large working volume
• thermal printer (record paper roll w58/ Ø 40 mm) (WAC-R)
• solid and liquid mode
• with casters for excellent mobility
• digital backlight LCD display
• digital timer function – delay time and operation time can be controlled
• built-in recorder: print sterilization data (only WAC-R)
• high-quality backlight LCD display
• CE certified and unique serial number for tracing

Features

• stainless steel wire basket (2 pcs. included) and pressure vessel
• powder-coated steel body
• top loading sterilizer for loading of large working volume
• thermal printer (record paper roll w58/ Ø 40 mm) (WAC-R)
• solid and liquid mode
• with casters for excellent mobility
• digital backlight LCD display
• digital timer function – delay time and operation time can be controlled
• built-in recorder: print sterilization data (only WAC-R)
• high-quality backlight LCD display
• CE certified and unique serial number for tracing

Controller

• digital fuzzy controller (fully automatic)

Technical data

Comparison