Labbox CO2 incubator, INC-CUsed in life sciences, immunology, genetics, microbiology, cell biology, etc.CO2 is used to adjust the pH value, so this incubator not only ensures the right temperature and humidity, but also a pH value that is favourable for cell growth. Outer material made of metal with epoxy resin coating. Inner chamber made of stainless steel. Tempered glass inner door. Air jacket heating. Temperature range: Room temperature +3 - 60 ºC. Resolution: 0.1 °C. Temperature fluctuation: ±0.2 ºC. Temperature homogeneity and stability: ±0.3 ºC. LCD displays. Timer function (0 - 9999 min). UV sterilisation function. Alarm functions (over-temperature alarm, temperature sensor error alarm, low water alarm,CO2 concentration alarm andlow CO2 alarm). Supplied with two height-adjustable grids (can accommodate additional grids, see table). Compatible with conventionalCO2 cylinders. 220-240 V - 50-60 Hz. Warranty 2 years.Brand: LBX INSTRUMENTSStorage temperature: CAS number: CLP hazard pictogram: ZEROUN Hazard Statements: ZERO
Share
Overview
The Memmert ICO 246 is a laboratory CO2 incubator designed to maintain a controlled environment for cell culture, microbiology and assisted reproduction applications. This model provides a 246 L chamber with digital CO2 control, humidity monitoring, stainless steel construction and automatic sterilisation functionality as described in the uploaded source page.
Key Features
- Designed for controlled CO2 incubation of cell cultures, microorganisms and IVF/ART laboratory workflows where a stable incubation environment is required.
- Temperature range from ambient +7 °C to 45 °C with stated temperature accuracy of ±0.1 °C and temperature uniformity of ±0.5 °C.
- CO2 concentration range of 0–20% with digital electronic CO2 control, auto-calibration and infrared CO2 sensing according to the source page.
- Integrated humidity monitoring/control with 95% humidity operation stated by the source; active humidity control for wider humidity operation may depend on configuration.
- Double-door design with an internal glass door and external stainless steel door to help reduce contamination risk and temperature loss during observation.
- Automatic chamber sterilisation programme stated as 4 hours at 160 °C, covering the chamber, ventilation system, water supply and sensor system.
- Stainless steel housing and working chamber with rounded, seamless internal corners for easier cleaning.
- Air-jacket and ventilation design intended to support homogeneous temperature and gas distribution inside the working chamber.
- CO2 supply stops when the door is opened, supporting safer routine operation and gas management.
Specification Highlights
- Capacity: 246 L.
- Chamber dimensions: 640 × 600 × 640 mm (H).
- External dimensions: 790 × 750 × 938 mm (H).
- Temperature range: ambient +7 °C to 45 °C.
- Temperature accuracy/uniformity: ±0.1 °C / ±0.5 °C.
- CO2 range: 0–20%.
- Humidity display range: 88–97%.
- Power: 2000 W.
- Weight: 110 kg.
Clinical and Laboratory Applications
- Cell culture incubation
- Microbiology and biotechnology laboratories
- IVF/ART and reproductive medicine laboratories, where the selected configuration is appropriate
- Research laboratories requiring controlled CO2 incubation conditions
Ordering Information
- Confirm model, chamber volume and final site voltage/frequency before ordering.
- Confirm shelf quantity, humidity configuration, CO2 connection accessories, validation documentation, installation, training and service package before purchase.
- For IVF, cell culture or regulated laboratory environments, confirm local regulatory requirements and required qualification documents before commissioning.
Note: Specifications and options can vary by configuration and supply market. Please confirm final configuration, accessories, documentation, service support and regulatory suitability before ordering.
Shipment
Benefit from reliable delivery options
Every day, we ship our laboratory equipment throughout Nigeria and internationally. We work with trusted and experienced logistics and courier partners to ensure safe and timely delivery. Shipping costs and delivery times depend on the items ordered and the recipient’s location. Alternatively, you may arrange to collect your order in person by appointment. Below is an overview of our shipping options and policies.
Shipping within Nigeria
All goods are insured as standard up to a value of ₦ equivalent of €25,000. Shipping costs are calculated based on the weight, dimensions, value of the shipment, and delivery destination within Nigeria. For detailed shipping information, please contact us directly—we will be happy to assist.
International shipping
For accurate international shipping costs, we require details of the specific product(s) you wish to order.
Please contact us by telephone or email for a tailored quotation.
Freight forwarding, sea or air freight
For large, heavy, or specialized equipment, we provide personalised quotations for road freight, sea freight, or air freight. Taking current logistics conditions into account, we aim to offer the best possible price-to-performance ratio.
Incoterms 2020
All shipments are handled in accordance with Incoterms® 2020 (ICC). Please contact us to confirm and agree on your preferred delivery terms.
Self-collection
If required, you may collect your goods in person by prior appointment. Please note that pricing and availability may vary between Nigeria and other countries.
Standard deliveries
Standard shipments within Nigeria are handled by reputable courier and logistics providers. Upon request, we can also arrange alternative carriers to meet specific delivery requirements.
Insurance
All deliveries are insured up to a maximum value of ₦ equivalent of €25,000. If the value of your goods exceeds this amount, we will contact you to arrange additional insurance coverage.
Delivery time
Delivery times depend on product availability and order volume. High-demand items may be subject to delays beyond our control. If you require urgent delivery, please inform us in advance, and we will do our best to accommodate your request.
Q: Saves time
A: This reason might be the most obvious, but it’s a clear benefit of an FAQ page. Not only does the FAQ page save customers time, but it also saves employees time as well. Having an FAQ page ensures customers don’t have to sit on the phone for hours waiting for simple answers, and employees don’t have to individually answer all questions.
Q: Earns trust
A: Information is available at the click of a button, but as we all know, information is not always true. Because of this, customers are more skeptical than ever before. They hunt for products by sifting through reviews, looking at the product on multiple websites, and doing price checking across the internet.
Q: Provides new insights
A: It’s difficult to get into the head of a shopper. Some buy on impulse, and others buy after thorough research. By tracking the clicks on your FAQ page, you can gather insights about your product or service that you didn’t know before. You can then inform your product team of these insights. From there, the product team can make changes to improve the product or experience.
Q: Drives internal page views
A: If you want your FAQ to be extremely thorough, which it should be, you can link to resources within your FAQ for your customers to find out more information. Whether you link to a blog that goes into more detail or a product page, this content helps the shoppers get the full story before making a purchase.
A: Prevents negative reviews
A: When looking through negative reviews, there’s almost always one thing in common: the problem could’ve been avoided.
Related Products
The biomedis Celculture® CO2 incubators from Esco are suitable for a wide range of scientific research in the field of cell culturing. The typical application areas include tissue engineering, in vitro fertilization, neuroscience, cancer research and other areas of research on mammalian cells.
- Exact temperature and CO2-regulation
- High temperature homogeneity
- HEPA filtration system with internal fan
- Capacitive Humidity Sensor
- IR CO2 sensor with automatic zero point calibration
- Short recovery times for temperature, CO2 and humidity after opening door
- Stainless steel inner chamber 1.4301 (AISI 304)
- 4 Shelves included
- 90°C decomtamination program (dry heat)
- Easy to clean with removable seals and glass door
- Date interface
- Low maintenance
- Stackable
BINDER CO2 Incubator C170-230V/120V
BINDER CO2 incubators ensure optimal and reproducible conditions for cell cultivation. With a highly effective decontamination concept, comprehensive equipment, as well as all the necessary options, the new C 170 series reliably covers every basic requirement when it comes to everyday work in the laboratory. Featuring the same footprint as the previous model, this sophisticated series of units offers a particularly large amount of space for incubating cell and tissue cultures successfully.
The efficiency marvel with 170-lite r capacity:
- Minimum footprint - maximum usable space
- Uncompromising hot air sterilization
- Fanless, hygienic interior
- Sophisticated design for optimum stacking capability
Important characteristics:
- Temperature range: room temperature plus 7 °C to 50 °C
- Humidity range: 90...95 % RH
- Auto-sterilization with hot air at 180 °C
- Humidification system with condensation protection
- CO2 gas-mixing jet with Venturi effect
- CO2 sensor with infrared technology
- Tightly-sealed inner door made of tempered safety glass
- Seamless, deep-drawn inner stainless steel chamber
- 3 perforated stainless steel shelves
- Units are stackable with stacking adapter
- Troubleshooting system with visual and audible alarms
- Zero-voltage alarm contact
- Door hinged right or left
BINDER CO2 incubator CB 220, standard equipment
CO2 incubator with sterilizable sensor
The new CB series offers optimal growth conditions for cell cultures. The ANTI.PLENUM concept, the 180 °C sterilization routine with the world's first sterilizable CO2 sensor and other unique BINDER technologies meet the highest requirements for best possible cell growth and maximum sample safety in the premium class of BINDER CO2 incubators.
- VENTAIRTM air jacket system
- Temperature range: 7 °C above room temperature up to 60 °C
- BINDER controller with LCD color display for simultaneous display of all important parameters (temperature, % CO2, % O2 concentration, humidity) and user-friendly push button/rotary knob
- Intuitive menu guidance
- Electronic chart recorder
- Variety of options for graphic display of process parameters
- Real-time clock
- Hot air sterilization at 180 °C
- with sterilizable built-in CO2 sensor
- Drift-free infrared CO2 measurement system
- CO2 introduction through patented gas mixing nozzle
- ANTI.PLENUM Design to avoid contamination of critical fixturesPermadryTM System
- PermadryTM system, double pan humidification system with defined condensation site for condensate-free interior walls
- Seamless deep-drawn inner chamber made of stainless steel with round corners and integrated shelf support system
- Electronic error self-diagnostic system with visual and audible alarms, as well as potential-free contact for central monitoring
- Independent temperature safety device class 3.1 (DIN 12880) with visual and audible temperature alarm
- Tightly-fitted inner glass door made of safety glass
- Ethernet interface for communication software
- APT-COMTM DataControlSystem
- Three perforated shelves made of stainless steel
- Stackable units with new stacking adapter
- 2-point door lock
- BINDER test certificate
BINDER CO2 incubator CB 220, with O2 control and gas-tight, divided inner glass door and devided shelfs
CO2 incubator with sterilizable sensor
The new CB series offers optimal growth conditions for cell cultures. The ANTI.PLENUM concept, the 180 °C sterilization routine with the world's first sterilizable CO2 sensor and other unique BINDER technologies meet the highest requirements for best possible cell growth and maximum sample safety in the premium class of BINDER CO2 incubators.
- VENTAIRTM air jacket system
- Temperature range: 7 °C above room temperature up to 60 °C
- BINDER controller with LCD color display for simultaneous display of all important parameters (temperature, % CO2, % O2 concentration, humidity) and user-friendly push button/rotary knob
- Intuitive menu guidance
- Electronic chart recorder
- Variety of options for graphic display of process parameters
- Real-time clock
- Hot air sterilization at 180 °C
- with sterilizable built-in CO2 sensor
- Drift-free infrared CO2 measurement system
- CO2 introduction through patented gas mixing nozzle
- ANTI.PLENUM Design to avoid contamination of critical fixturesPermadryTM System
- PermadryTM system, double pan humidification system with defined condensation site for condensate-free interior walls
- Seamless deep-drawn inner chamber made of stainless steel with round corners and integrated shelf support system
- Electronic error self-diagnostic system with visual and audible alarms, as well as potential-free contact for central monitoring
- Independent temperature safety device class 3.1 (DIN 12880) with visual and audible temperature alarm
- Tightly-fitted inner glass door made of safety glass
- Ethernet interface for communication software
- APT-COMTM DataControlSystem
- Three perforated shelves made of stainless steel
- Stackable units with new stacking adapter
- 2-point door lock
- BINDER test certificate
BINDER CO2 incubator CB 160, with O2 control and gas-tight, divided inner glass door and devided shelfs
CO2 incubator with sterilizable sensor
The new CB series offers optimal growth conditions for cell cultures. The ANTI.PLENUM concept, the 180 °C sterilization routine with the world's first sterilizable CO2 sensor and other unique BINDER technologies meet the highest requirements for best possible cell growth and maximum sample safety in the premium class of BINDER CO2 incubators.
- VENTAIRTM air jacket system
- Temperature range: 7 °C above room temperature up to 60 °C
- BINDER controller with LCD color display for simultaneous display of all important parameters (temperature, % CO2, % O2 concentration, humidity) and user-friendly push button/rotary knob
- Intuitive menu guidance
- Electronic chart recorder
- Variety of options for graphic display of process parameters
- Real-time clock
- Hot air sterilization at 180 °C
- with sterilizable built-in CO2 sensor
- Drift-free infrared CO2 measurement system
- CO2 introduction through patented gas mixing nozzle
- ANTI.PLENUM Design to avoid contamination of critical fixturesPermadryTM System
- PermadryTM system, double pan humidification system with defined condensation site for condensate-free interior walls
- Seamless deep-drawn inner chamber made of stainless steel with round corners and integrated shelf support system
- Electronic error self-diagnostic system with visual and audible alarms, as well as potential-free contact for central monitoring
- Independent temperature safety device class 3.1 (DIN 12880) with visual and audible temperature alarm
- Tightly-fitted inner glass door made of safety glass
- Ethernet interface for communication software
- APT-COMTM DataControlSystem
- Three perforated shelves made of stainless steel
- Stackable units with new stacking adapter
- 2-point door lock
- BINDER test certificate
BINDER CO2 incubator CB 220, with O2 control
CO2 incubator with sterilizable sensor
The new CB series offers optimal growth conditions for cell cultures. The ANTI.PLENUM concept, the 180 °C sterilization routine with the world's first sterilizable CO2 sensor and other unique BINDER technologies meet the highest requirements for best possible cell growth and maximum sample safety in the premium class of BINDER CO2 incubators.
- VENTAIRTM air jacket system
- Temperature range: 7 °C above room temperature up to 60 °C
- BINDER controller with LCD color display for simultaneous display of all important parameters (temperature, % CO2, % O2 concentration, humidity) and user-friendly push button/rotary knob
- Intuitive menu guidance
- Electronic chart recorder
- Variety of options for graphic display of process parameters
- Real-time clock
- Hot air sterilization at 180 °C
- with sterilizable built-in CO2 sensor
- Drift-free infrared CO2 measurement system
- CO2 introduction through patented gas mixing nozzle
- ANTI.PLENUM Design to avoid contamination of critical fixturesPermadryTM System
- PermadryTM system, double pan humidification system with defined condensation site for condensate-free interior walls
- Seamless deep-drawn inner chamber made of stainless steel with round corners and integrated shelf support system
- Electronic error self-diagnostic system with visual and audible alarms, as well as potential-free contact for central monitoring
- Independent temperature safety device class 3.1 (DIN 12880) with visual and audible temperature alarm
- Tightly-fitted inner glass door made of safety glass
- Ethernet interface for communication software
- APT-COMTM DataControlSystem
- Three perforated shelves made of stainless steel
- Stackable units with new stacking adapter
- 2-point door lock
- BINDER test certificate
