Esco Medical Multi-Zone ART / IVF Workstation – 3 ft, 4 ft and 6 ft

LABOX FBB R 12 IVF Fully Automated Laminar Flow Workstation for IVF Micromanipulation

The LABOX FBB R 12 IVF is a fully automated, floor-standing laminar-flow laboratory workstation designed for IVF micromanipulation work such as ICSI/IMSI procedures. It is intended for workflows where clean laminar airflow and vibration control are important, including work with cells and tissues using micromanipulators.

Confirmed Source Details

• Model: FBB R 12 IVF
• Product type: Fully automated laboratory workstation
• Source feature values: Operation: fully automated; Configuration: floor-standing; Other characteristics: laminar flow

Key Features

• Fully automated floor-standing laminar-flow workstation for IVF micromanipulation work.
• Designed for ICSI/IMSI and other microscope-based IVF procedures where vibration should be reduced.
• Laminar airflow workstation designed to protect processed cells and tissues from particulate and bacterial contamination.
• Laminar working area is physically separated from the working desk.
• Integrated anti-vibration insert as part of the workstation solution.
• Fully automated operation controlled by the SMART control system CR2000.
• Local touch-screen operation with remote-control capability via mobile devices, depending on final configuration.
• Designed to provide cleanliness Class A according to EC GMP Volume 4, Annex 1, as stated by the source page.
• Ergonomic construction for working with micromanipulators and microscopes.

Typical Applications

• IVF laboratories
• ICSI and IMSI micromanipulation workflows
• Cell and tissue handling under laminar airflow
• Microscope and micromanipulator work requiring vibration control
• Specialist ART laboratory workstations

Procurement and Configuration Notes

• Confirm voltage, final workstation configuration, installation requirements and local laboratory compliance needs before ordering.
• Confirm micromanipulator, microscope, anti-vibration and work-area requirements before procurement.
• Confirm whether remote control, touch-screen interface setup, service support and validation documentation are required.
• This listing is based on manufacturer/distributor product page information; final technical specification should be confirmed before order placement.

LABOX FBB 120-IVF Laminar Flow IVF Cabinet

Innovative laminar flow cabinet specially designed for IVF centers. The set is made up of components that are tested in practice and provide optimum works with cells and tissues. Laminar flow cabinet FBB-IVF provides excellent protection against particle and bacterial contamination of processed tissues and cells. Low noise and low vibration State of the art SMART control system CR2000 User friendly interface Low operation cost Remote control and service (iOS, Android, PC) Continuous monitoring of filter pressure drop, temperature and air flow speed in the work area, temperature on the heating surfaces, etc. with data export to email (optionally to USB) Full integration of the microscope solution, including light Lifetime service support According to customer requirements are integrated into the cabinets technologies, such as: stereomicroscope inverted microscope heating surface CO2 incubator LCD panel or All-in-One PC and other LAMINAR FLOW CABINET CONSTRUCTION Cabinet workspace provides cleanliness class A according to EC GMP Volume 4, Annex 1. Thanks to a low vibration level provide an ergonomically ideal conditions for working with the microscope. Operation of the workstation is controlled by the state-of-the-art SMART control system CR2000, which is inspired by requirements fo 4.0 industry. This control system ensures fully automatic operation of the device, local control and also remote control. Workstation it is possible to control via touch screen or remotely via mobile devices.

Model: FBB 120-IVF

Key Features

• Laminar flow cabinet specially designed for IVF centers and cell/tissue work.
• Provides protection against particle and bacterial contamination of processed tissues and cells.
• Low-noise, low-vibration design for sensitive IVF workflow environments.
• SMART CR2000 control system with user-friendly interface.
• Continuous monitoring of filter pressure drop, temperature, airflow speed and heated-surface temperature, with data export options depending on configuration.
• Can be integrated with technologies such as stereomicroscope, inverted microscope, heating surface, CO2 incubator, LCD panel or all-in-one PC depending on configuration.
• Features: IVF application; Floor-standing configuration; Laminar flow air system.

Typical Applications

• IVF centers
• Embryology laboratories
• Cell and tissue handling
• Embryo and gamete manipulation workflows
• Laminar-flow assisted reproductive technology procedures

Procurement and Configuration Notes

• Confirm required microscope integration, heating surface, CO2 incubator and computer/display options before ordering.
• Confirm voltage, cabinet layout, site access and airflow validation requirements before installation.
• Catalogue source notes that specific technologies can be integrated according to customer requirements.

LABOX MBB-IVF-12 Class II Microbiological Safety Cabinet for IVF Laboratories

State-of-the art solution of microbiological safety workstation, so-called biohazard, for the purpose of work in tissue centers and banks, IVF centers, etc. The set consists of components that are tested in practice and together ensure optimal laboratory work with cells and tissues. This includes the possibility of full integration of the heating surface and the microscope. Microbiological safety cabinet (MSC, BSC), class II. according to the standard EN 12469: 2000, it is intended for applications requiring laminar air flow to protect the product from particulate and bacterial contamination and at the same time requiring protection of the operator and the environment from the influence of the processed product. The MBB workstation is a new generation device, equipped with the latest components, security elements and a SMART control system. Fully automated operation controlled by a smart control system CR2000 with a 7 ”touch panel, ensuring optimal parameters in the workspace for the selected operating mode, maximum security, remote control, advanced timers, accessory control, email and mobile phone notifications, and much more State-of-the-art integration of a microscope with a heating surface for works with living tissue Front glass with electric movement with automatic positioning and advantage protection against injury and damage Ergonomic design, large workspace Quiet operation thanks to perfect design, good sound insulation, powerful motor with low noise. The operator can therefore concentrate on working for a longer period of time.

Model: MBB-IVF-12

Key Features

• Class II microbiological safety workstation for tissue centers, tissue banks and IVF centers.
• Designed to support laboratory work with cells and tissues while protecting the product, operator and environment.
• Conforms to EN 12469:2000 for applications requiring laminar airflow and microbiological safety protection.
• Equipped with a smart CR2000 control system with 7-inch touch panel.
• Supports integration of heating surface and microscope solutions depending on configuration.
• Features: Class II; Laboratory application; ISO Class 5; Floor-standing; EN 12469; LED light; HEPA filter and laminar flow.

Typical Applications

• IVF centers
• Tissue centers and tissue banks
• Cell and tissue handling
• Biohazard/microbiological safety workflows
• Laboratory procedures requiring product, operator and environmental protection

Procurement and Configuration Notes

• Confirm cabinet width, local certification requirements and site installation constraints before ordering.
• Confirm filter specification, HEPA service requirements, exhaust/recirculation setup and decontamination procedure.
• Confirm microscope, heated work surface and electrical integration requirements before final configuration.

LABOX LFM-75 Anti-Vibration Work Table for IVF Micromanipulation

Second generation of state-of-the-art solution for ICSI, IMSI, embryo biopsy, and other procedures sensitive to vibrations, like cells micromanipulation. The table is comfortable and ergonomically designed. The microscope is placed on the same level as the table top. The anti-vibration insert has low profile, there are no obstacles underneath the table desk. The table can be equipped with a pullout keyboard shelf, monitor holder, a underdesk shelf with electrical HUB and cable organizer for installation of PC, UPS, etc. Most recently, the anti-vibration table can be supplemented with an electrically height-adjustable stand, without affecting its own anti-vibration function. Ultimate antivibration system designed for IVF micro-manipulation Comfortable and ergonomic design Easy upgradable from passive to active solution Maintenance free solution LFM75-IVF AV TECHNOLOGY DESCRIPTION The table is equipped with AV platform, installed as an island in the working desk. The AV platform prevents transfer of vibrations from the surrounding environment. The core of the system is an state-of-the art AV insert. AV insert works on basis of floating platform. Antivibration function is achieved by four special springs located inside the AV inserts. They are reacting in all directions and in the short time. The passive system LFM75 PST will work in most environment. The system has highly damped step respond. High vibration absorption and isolation performance, due to specially designed passive damping, which works in all directions.

Model: LFM-75

Key Features

• Second-generation anti-vibration work table for ICSI, IMSI, embryo biopsy and other vibration-sensitive micromanipulation procedures.
• Comfortable ergonomic design with microscope positioned at the same level as the tabletop.
• Low-profile anti-vibration insert with no obstruction under the desktop.
• Can be configured with keyboard shelf, monitor holder, under-desk shelf, electrical hub and cable organizer.
• Can be supplemented with an electrically height-adjustable stand while maintaining anti-vibration performance.
• Features: Type: work/laboratory; Shape: rectangular; Other characteristics: anti-vibration and height-adjustable.

Typical Applications

• IVF laboratories
• ICSI and IMSI procedures
• Embryo biopsy
• Cell micromanipulation
• Microscope-based laboratory work sensitive to vibration

Procurement and Configuration Notes

• Confirm microscope model, anti-vibration platform configuration and bench height requirements before ordering.
• Confirm whether keyboard shelf, monitor holder, electrical hub, UPS shelf and cable organizer are required.
• Confirm passive or active anti-vibration requirements depending on site conditions and microscope sensitivity.